usava DEMAG para venda

Motor de guindaste, motor sobressalente, motor elétrico, com freio DEMAG Tipo 19/11 0,0,4 / 1,56 kW 700 / 2880 rpm 380 V 3AC eixo com roda dental: Ø 25 mm, comprimento: 40 mm, 17 dentes flange: Ø 180 / 227 x 255 mm duas velocidades !br usado, testado ! Dimensões: 465 x 290 x 290 mm

Motor de guindaste, motor sobressalente, motor elétrico DEMAG KBA 80 A 4 R ( KBA80A4R ) 0,25 kW 1380 rpm 220 / 380 V eixo:Ø 19 mm Flange: Ø 124 mm usado, testado Dimensões: 320 x 160 x 220 mm

Motor de guindaste, motor sobressalente, motor elétrico DEMAG KBA 80 A 4 R ( KBA80A4R ) 0,25 kW 1380 rpm 220 / 380 V Eixo: Ø 19 mm Flange: 125 x 125 mm usado, testado Dimensões: 350 x 160 x 220 mm

Motor de guindaste, motor sobressalente, motor elétrico DEMAG KBA 112 B 4 ( KBA112B4 ) 3,5 kW 1425 rpm 220 / 380 V Eixo: Ø 28 mm Flange: 250 x 250 mm sem carcaça de freio!; usado, verificado Dimensões: 435 x 315 x 290 milímetros

Motor de guindaste, motor sobressalente, motor elétrico, com freio, duas velocidades DEMAG KBA 80 A ( KBA80A ) 0,0,0,0 035 / 0,25 kW 400 / 1390 rpm 380 V 3AC 50 Hz Diâmetro do cano: Ø 19 mm Comprimento de onda: 25 mm largura do sulco: 6 mm Diâmetro da flange: Ø 80 / 123 mm diâmetro do círculo do parafuso: Ø 100 mm 4x furo roscado: M6 x 1.0, profundidade: 10 mm usado, testado ! Dimensões: 325 x 160 x 220 mm

Motor de engrenagem com freio mecânico, motor de guindaste DEMAG 2.4 kW 7,7,7 Caixa de velocidades 6 rpm : AFW12 S-B14-3-0-20 i: 125 motor: KBA 112 B 6 ( KBA112B6 ) 2,4 kW 945 rpm 230 / 400 V 3AC 50 Hz IP55 diâmetro do eixo oco: Ø 75 mm Novo ! Dimensões: 540 x 470 x 910 mm

Elemento de comutação, 1-stage DEMAG SESN 87419844 500 V 25 A Novo ! Dimensões: 65 x 45 x 58 mm

Elemento de comutação duplo, 1-stage DEMAG CBD1 87466744 500 V 20 A Novo ! Dimensões: 65 x 65 x 65 mm

Motor de engrenagem DEMAG Tipo: S063 H-43-0 com motor: KBA 71 B 4 0,75 kW 135 rpm 230 / 400 V 3AC IP54 diâmetro do eixo oco: Ø 28 mm usado, testado Dimensões: 510 x 155 x 210 mm

Motor de guindaste, motor sobressalente, motor DC com freio DEMAG GDH 140 D2/1110 ( GDH140D2/1110 ) 13 kW 2840 rpm >

Motor de guindaste, motor sobressalente, motor DC DEMAG GDH 140 D2/1115 ( GDH140D2/1115 ) 2668009 9,9,5 kW 3135 rpm 400 V DC Excitação: 170 V DC Diâmetro do eixo: Ø 32 mm Comprimento de onda: 35 mm Largura do sulco: 10 mm Diâmetro da flange: Ø 280 / 318 x 318 mm diâmetro do círculo do parafuso: Ø 355 mm furo: Ø 17,5 mm IP55 usado, testado ! Dimensões: 780 x 320 x 375 mm

Motor de guindaste, motor sobressalente, motor DC DEMAG GDH 140 D2/1115 ( GDH140D2/1115 ) 9,5 kW 3135 rpm 400 V com codificador usado, testado ! Dimensões: 950 x 380 x 320 mm

screw size: mm injection shot weight in Polysterol: g/PS closing pressure:1100 kN

screw size: mm injection shot weight in Polysterol: g/PS closing pressure: kN

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:1250 kN

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:1250 kN

Fabricante: Demag, Ano: 1999, Hight de coluna mm: 8000, Traglast kg: 500, Ano :1999

Fabricante: Demag, Ano: 1999, Hight de coluna mm: 8000, Traglast kg: 500, Ano :1999

Description: With ABUS electric chain hoist, maximum load 250 kg maximum capacity: 125 kg, throat: 5,000 mm, Approx. Onsite Dimension. (l x w x h): 5,700 x 700 x 3,600 mm, weight approx.: 500 kg

Description: Serial number 90133 Load capacity: 16/8 tons Double hoist Useful length: 22.500 mm Birrail IKUSI wireless pushbutton panel Rails and power line not included Approx. Onsite Dimension. (l x w x h): 23,000 x 4,000 x 2,200 mm, weight approx.: 7,000 kg

maximum capacity: 250 kg, throat: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 4,000 x 600 x 3,400 mm, weight approx.: 1,000 kg

Description: including Demag electric chain hoist, maximum load capacity 500 kg maximum capacity: 500 kg, throat: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 4,600 x 600 x 4,750 mm, weight approx.: 1,000 kg

This DEMAG Ergo-Tech 250-1450 injection moulding machine was manufactured in 1995. It comes equipped with handling capabilities, tailored for intricate and precise manufacturing processes. This machine represents a blend of durability and efficiency, making it a solid addition to any production line looking for versatile moulding solutions. The DEMAG Ergo-Tech 250-1450 we have for sale offers reliability and a robust build, ensuring longevity and consistent performance in demanding environments. For further details on this machine, please contact us.

This injection moulding machine was manufactured in 1999. The DEMAG D110-310H/120V stands out for its robust design and reliable performance over the years. Known for its efficiency in production environments, this model has been a staple for businesses seeking to enhance their manufacturing capabilities. This DEMAG machine we have for sale represents an opportunity to acquire proven machinery with a track record of success. For further details, please contact us to discuss how this machine can meet your needs.

This injection moulding machine, manufactured in 2000 by DEMAG, model Ergo-Tech 350 Concept, comes with handling technical specifications, making it a prime choice for efficient and reliable production. Its design emphasizes durability and ease of use, suitable for a wide range of injection moulding applications. The DEMAG Ergo-Tech 350 Concept machine we have for sale represents an opportunity to enhance your manufacturing capabilities with a proven, quality piece of equipment. For further information, please contact us.

This DEMAG Ergo-Tech 110-310H-120V injection moulding machine was manufactured in 2002, offering precision and reliability for various production needs. Its notable for its efficiency and ease of use, designed to streamline manufacturing processes. This DEMAG machine we have for sale represents a solid addition to any production line, enhancing output with its proven performance. Contact us for further details.

This used DEMAG Ergotech System 1500-440/120 injection moulding machine was manufactured in 1999, equipped with handling features for enhanced productivity and ease of use. As an injection moulding machine, it offers reliable performance and precision in moulding operations, making it a valuable asset for production lines requiring high-quality plastic components. The opportunity to buy this DEMAG Ergotech System 1500-440/120 injection moulding machine represents a strategic investment for businesses looking to upgrade or expand their manufacturing capabilities. For more details, please contact us.

This used injection moulding machine manufactured in 2001 by DEMAG, model D125-320h/120v, comes with handling features, designed to optimize production efficiency and reliability. A robust example of engineering excellence, this machine stands out for its precise performance and durability. The technical specifications highlight its adaptability to various production requirements, making the DEMAG D125-320h/120v machine we have for sale a valuable asset for any production line seeking quality and consistency. For further details, please contact us.

Closing force: 280 T Opening stroke: 675 mm Between columns: 630 X 630 mm Tray dimensions: 950 x 950 mm Mini/maxi mould: 330/710 mm Max gap between trays: 1385 mm Motor power: 26 kW Heating power: 23.1 kw Type of control: NC 4

INJECTION UNIT Screw diameter: 60 mm Calculated injection volume: 763 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 1905 bars PS plasticization capacity: 690 Kg / h CLOSING UNIT Closing force: 3300 kN Mold thickness Mini / Max: 330/710 mm Max distance between tray: 1385 mm Passage between columns: 710 x 630 mm Tray size: 1040 x 950 mm GENERAL Heat output: 55 kW Total installed power: 78 kW Quantity of oil: 700 l. EQUIPMENT - NC4 control - Electric motor on metering - Integrated hot ducts - EUROMAP - 3 Hydraulic cores - 3 Sequential cores - 1 Air core

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 830 x 830 Clearance between columns (hxv) [mm] 560 x 560 Min./max. mold height [mm] min 310 Maximum opening width [mm] 1335 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 451 Injection weight [g] 410 Injection pressure [bar] 1946 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 15 Dimensions and weight Net weight with control cabinet [t] 9 Dimensions (length x width x height) [m] 5.7 x 1.7 x 2.1

Type of control: NC 4 Number of hours: 34,000 H Closing force: 80 T Opening stroke: 450 mm Between columns: 420 x 420 mm Tray dimensions: 600 X 600 mm Mini/maxi mould: 250/mm Max gap between trays: 700 mm Injection: Screw diameter: 35mm Screw length: 20 D cm3: 168 Bars: 2020 General: Motor power: 15 kW Heating power: 9 kw Cores: 1 Robot interface: yes Bi metal: yes

DEMAG 150T NC4 ERGOTECH 150/500-610 COMPACT 2 hydraulic cores 1 pneumatic core

Control type: NC 5 Number of hours: 27,000 hours Closing Closing force: 350 T Opening stroke: 700 mm Between columns: 760 x 710 mm Tray dimensions: 1070 X 1015 mm Mini/maxi mold: 400/670mm Max distance between trays: 1370 mm Injection: Screw diameter: 60 mm Screw length: 20 D cm3: 2366 Bars: 890 General: Motor power: 55 kW Heating power: 23.1 kW Closing weight: 18 T Injection weight: Dimensions length: 6.5 m Width dimensions: 1.8 m Dimensions height: 2.3m Options: Cores: hydraulic predisposition 2 cores Robot interface: E67 Bi metal: YES Others: 4 blow guns, 2 Kisler mold pressure ports, laminar flow, 8 hot runners

Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).

Control type: NC 4 Number of hours: 32,500 hours Closing force: 80 T Opening stroke: 450 mm Between columns: 420 x 420 mm Tray dimensions: 600 X 600 mm Mini/maxi mold: 250/mm Max distance between trays: 700 mm Injection: Screw diameter: 35mm Screw length: 20 D cm3: 168 Bars: 2020 General: Motor power: 15 kW Heating power: 9 kW Closing weight: 4 T Injection weight: Dimensions length: 4.2 m Width dimensions: 1.4m Height dimensions: 4.8 m Options: Cores: 1 Robot interface: yes Bi metal: yes

The machine has a Demag DR631-0399 robot built into it. Machine with CE standards. Type of material used: PC/ABS Service History: 3.2018 - Calibration - Ergocheck 1.2016 — Replacement of a faulty hydraulic system pressure sensor. scheme 1.2015 – repair of the nozzle rod. units 2.2014 — Replacement of the chamber, auger and tip 1.2013 — Replacement of the screw and tip 6.2012 – Repair, re-sealing of the injection cylinder. units 11.2010 — Repair of proportional valve 4.2008 — Replacing the control panel display 3.2008 — Replacing the proportional valve 3.2008 — Calibration — Ergocheck 12.2007 — Replacing the tip

Clamping force [kN] 1600 Dimensions of mounting plates (hxv) [mm] 770 x 770 Clearance between columns (hxv) [mm] 520 x 520 min./ max. mold height [mm] min275 max 685 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 40 Injection weight [g] 260 Injection pressure [bar] 1600 Electric-hydraulic equipment Nominal power of the pump motor [kW] 22 Heater power [kW] 11.3 Dimensions and weight Net weight with control cabinet [t] 6.5 Dimensions (L x W x H) [m] 5.3 m x 1.5 m x 2 m

Clamping force [kN] 350 Dimensions of mounting plates (hxv) [mm] 410 X 410 Clearance between columns (hxv) [mm] 280 x 280 injection unit Screw diameter [mm] 25 Injection volume [cm3] 48 Injection weight [g] 43 Injection pressure [bar] 2441 Electric-hydraulic equipment Nominal power of the pump motor [kW] 11 Heater power [kW] 5 Dimensions and weight Net weight with control cabinet [t] 1.8 Dimensions (L x W x H) [m] 3.20x1.30x1.80 m

DEMAG ET 650/5200 - non-functional broken column Robot - broken year of manufacture: 1997 v. no. 8631032 auger: 95 mm weight: 2835 cm3 closing force: 650 t clamping plates: 1450/1350 between columns: 1000/900

Demag Extra 160-600 Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 770 X 770 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] 275 Maximum opening width [mm] 1085 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 291 Shot weight [g] 291 Injection pressure [bar] 1910 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 11,3 Dimensions and weight (approximately) Net weight with control cabinet [t] 6,4 Dimensions (L x W x H) [m] 5,3 x 1,5 x 2,0

Demag Ergotech 110/470-430 machine The machine, connected, is working. In good condition Year of production: 1999 For sale immediately. Possibility to view and start the machine. Last machine inspection: 09/2022

Demag Ergotech Compact 1500-610 Clamping/injection matrix Clamping force [kN] 1500 Mounting plate dimensions (hxv) [mm] 750 x 750 Clearance between columns (hxv) [mm] 500 x 500 Injection unit Screw diameter [mm] 50 Shot weight [g] 330 Injection pressure [bar] 1973 Dimensions and weight (approximately) Net weight with control cabinet [t] 7 Dimensions (L x W x H) [m] 5.20x1.60x2.10

Demag Ergotech 800-310 Clamping/injection matrix Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 540 x 540 Clearance between columns (hxv) [mm] 400 x 400 Injection unit Screw diameter [mm] 35mm Shot weight [g] 149 Injection pressure [bar] 2024 Electro-hydraulic equipment Power rating of the pump motor [kW] 15 Power rating of barrel heating [kW] 9,4 Dimensions and weight (approximately) Net weight with control cabinet [t] 3,6 Dimensions (L x W x H) [m] 4.05x1.27x1.91

Clamping unit Clamping force350 ton Opening stroke675 mm Distance between tie bars630 x 630 mm Mould height min.330 mm Mould height max.710 mm Platen size (h x v)950 x950 mm Injection unit Screw diameter70 mm Injection volume1212 cm³ Shot weight1090 g Injection pressure1877 bar Measurements and weight Dimensions6,5 x 1,9 x 2,2 m Machine weight 16000 kg this extra information is standard for this model. Please always double-check the details during a visit The DEMAG Ergotech System 3500-2300 NC4 Injection Molding Machine, introduced in 2002, exemplifies precision and efficiency in plastic molding technology. Renowned for its advanced features and superior performance, this model has become a cornerstone in the injection molding industry. At its core, the Ergotech System 3500-2300 NC4 excels in injection molding operations with unparalleled accuracy and speed. ...

Screw diameter: 50 mm Calculated injection volume: 530 cm³ Length/diameter ratio: 20 L/D

Demag Ergotech Concept 110/470-600 Clamping/injection matrix Clamping force [kN] 1100 Mounting plate dimensions (hxv) [mm] 670 x 660 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 250 Maximum opening width [mm] 850 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 398 Shot weight [g] 359 Injection pressure [bar] 1550 Electro-hydraulic equipment Power rating of the pump motor [kW] 33,3 Power rating of barrel heating [kW] 15,7 Dimensions and weight (approximately) Net weight with control cabinet [t] 5,6 Dimensions (L x W x H) [m] 4,9 x 1,5 x 2,0

Demag Ergotech 2000-840 Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 830 x 830 Clearance between columns (hxv) [mm] 560 x 560 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 636 Shot weight [g] 570 Injection pressure [bar] 1351 Dimensions and weight (approximately) Net weight with control cabinet [t] 10 Dimensions (L x W x H) [m] 5.70x1.70x2.10