usava DURMA para venda

sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm pre-bending: siehe TD total power requirement: 3 kW weight of the machine ca.: 1,06 t dimensions of the machine ca.: 1260 x 1350 x 1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1000 x 700 x 1380mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 18,5 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4260 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD 0: 20mm (s) Ampullen/h 0: mm 0: mm total power requirement: 22 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 4260 x 1660 x 1590 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 120 kW weight of the machine ca.: 78 t dimensions of the machine ca.: 6100 x 5150 x 4300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6mm total power requirement: 11 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4880 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 800 x 700 x 1200mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 30 kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2000x1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 3,23 t dimensions of the machine ca.: 3200 x 2300 x 1350 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largura da chapa: 3000 mm se de espessura: 10 mm desfance entre colunas: mm total power requirement: kW peso da máquina ca.: 9,8 t escamas da máquina ca.: 4,15 x 3,55 x 2 m Brand: Durma Type: DHGM 3010 Year of make: 2002 Knife comprimento: 3.000 mm Plata de espessura: 10 mm Electric backstop Dimensional de metralhadora (lxwxh): 4.150 x 3.550 x 2.000 mm Mese de metralhadora: 9.800 kg

pressão: comprimento t chamfer: mm distância entre colunas: mm Control: total power requirement: kW peso da máquina ca.: t dimensionais da máquina ca.: m Brand: Durma Type: HAP 35200 Capacidade: 200 T Se de comprimento: 3.550 mm Desistância entre colunas: 3.100 mm Sa: 185 mm As dimensões da máquina de gelo: 2.400 x 4,800 x 2.850 mm Machine peso: 13.300 kg

pressão: 160 t chanfro comprimento: 3550 mm curso: 200 mm quantidade de óleo: 150 l peso da máquina ca.: 11400 kg dimensões da máquina ca.: 4700x2100x2700 mm

largura da folha: 3100 mm espessura da placa: 4 mm ângulo de corte: 1 30' back stop - ajustável: 750 mm peso da máquina ca.: 3800 kg

pressure: 160 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 200 mm throat: 350 mm ajustment speed: 100 mm/sec working feed: 9.0 mm/sec return speed: 86.0 mm/sec Control: DU 6000 work height max.: 910 mm table width: 240 mm oil volume: 150 l total power requirement: 15.0 kW weight: 9820 kg range L-W-H: 4200 x 2100 x 2700 mm New price ~ 60.000 euros Special price on request Furnishing: - electro-hydraulic CNC press brake Stress-relieved steel structure body = durable monoblock frame - DURMA DU 6000 CNC control (CYBELEC) Swivel operation, front right Positioning of the back gauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Possibility of programming various programs - CNC controlled axes: Y1 + Y2 + X - CNC electro-motorized back gauge (X axis) 2x manually adjustable stop fingers including lateral and height adjustment (Z+R axis) - m ...

sheet width: 2550 mm plate thickness: 4,0 mm distance between columns: 2600 mm back stop - adjustable: 750 mm no. of strokes: 42 Hub/min cutting angle: 1°30 table width: 450 mm table height: 800 mm total power requirement: 7,5 kW weight of the machine ca.: 3230 kg dimensions of the machine ca.: 3200 x 2300 x 1350 mm Current new price with special accessories ~ 33.000 euros from a maintenance workshop / good condition () Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 Control unit with touchscreen function 128 MB internal memory (programming possible) Multilingual (English, Turkish, German) INCH/metric conversion - manual cutting gap adjustment, from the front analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball ...

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm distance between columns: 3120 mm down holder: 16 Stück oil volume: 200 ltr. cutting angle: 1°50 no. of strokes: 13 Hub/min control: ENC 100M table width: 580 mm throat: 50,0 mm total power requirement: 22,0 KW weight: 9300 kg range L-W-H: 4200 x 2250 x 2100 mm from a maintenance workshop New price ~ 55.000 euros -------------------------------------------------- robust electro-hydraulic oscillating shears with DURMA ENC 100M NC control Manual cutting gap adjustment, via eccentric -------------------------------------------------- Furnishing: - electro-hydraulic oscillating shears - with DURMA ENC 100M control Backgauge preselection - X axis Number of pieces Cutting length limitation Swivel control, left front - motorized backgauge, travel = 1.000 mm (X axis) on ball screws Travel speed 200 mm/sec. ...

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3120 mm down holder: 16 Stück oil volume: 200 ltr. cutting angle: 1° 30 no. of strokes: 15 Hub/min control: ENC 100 table width: 500 mm throat: 50.0 mm Number of working hours: 912 h total power requirement: 15.0 KW weight: 7650 kg range L-W-H: 3810 x 2200 x 2050 mm from a maintenance workshop () very good / well-maintained condition (as new) with only 912 operating hours current new price ~ 45.000 euros Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear with DURMA ENC 100M control manual cutting gap adjustment Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA ENC 1 ...

This Durma AD-R 30220 Bending machine was manufactured in the year 2012 in Turkiye. The machine has a pressing force of 2200 kN and a bending length of 3050 mm.

This Durma RP9 1250x20 punching machine was made in the year 2007 in Turkey. It is equipped with a Siemens 840 control unit. The machine has a punching force of 200 kN. Set of tools included.

This DURMA HD-F 3015 Fiber laser cutting machine was manufactured in the year 2015 in Turkey. Contact us anytime for further questions.

This Durma AD-S 40320 Bending machine was manufactured in the year 2012 in Turkey and has 35040 working hours. It is equipped with a Cybelec ModEva 10S control unit. Contact us anytime for further questions.

This 3-axis Durma E 2590 bending machine, manufactured in 2006, is optimized for precise sheet metal bending. It offers a substantial bending force of 90 tons and accommodates a bending length of 2550mm. With dimensions of 3750 × 2000 × 2250 mm and weighing 5300 kg, this robust machine ensures stability and precision. Currently under power, its prepared for immediate operational use. Reach out for further details regarding this Durma bending machine.

Durma AD-R 25100 CNC Press Brake 100 Ton Machine is like new condition

Durma PBF 30120 CNC Press Brake Folding length : 3100 mm 120 Ton DT-10 Control Unit Machine is in very good condition

Machine in good technical condition, regularly serviced. Subject to prior agreement, possibility of testing. Pressing force 100 tons Working length 3050 mm CNC control system - Cybelec CNC controlled R axis AKAS motorized opto-barrier 4 inch rear stop 4 sheet metal supports Dimensions (L/W/H) 5300/2600/3100 mm Weight 8500 kg

Durma AD-R 30135 CNC Hydraulic Press Brake 135 Ton Number of axis : 4 (Y1, Y2, X, R) CNC Unit : SKY 22 Motorized crowning Upper Tools : RL P135.75.R08 3050MM Down Tool : RL M.460.R 3050MM Machine is in excellent condition

Capacidade: 175 t Comprimento dobrável: 3050 mm CNC Marca: Modelo Delem CNC: DELEM DA-56 Comprimento de flexão:        3050mm Distância entre coluna:    2600mm Força de pressão máxima:        175T Dis. Raio - Tabela:          530mm Curso de feixe:                265mm Largura da tabela:                104mm Feixe de troth:                 450mm Velocidade do approch:              160mm/min. Velocidade de trabalho:              10mm/min. Velocidade de retorno:               100mm/min. Regulação do eixo X manómetro para trás:1000mm Número de eixo controlado:  ...