usava ENGEL para venda

Fabricante: Battenfeld Tipo: BA 2000-1000 BK Ano de construção: 1999 Controlador: CC 100 Fecho da força de fixação/força: 1100 kN Tipo/tipo de fecho: Hidráulico Holm espaçamento/Dist.Betw.Tiebars: Tamanho da placa: 730 mm x 600 mm WZ em altura/molde embutido alto: min 250 mm Percurso de abertura/curso de abertura: 500 mm Espaçamento de placa max/Max. Luz do dia aberta: 750 mm Tamanho do parafuso: 50 mm Volume de traçado/volume de tiro: 251 cc O Spez. Pressão spritzdr./injeção: 1300/2050 bar Geral/Geral Motor/Motor Power: 18.5 kW Aquecimento/aquecimento: 9.2 kW Dimensões/Dimensões: 4,8 m x 1,4 m x 2 m Peso: 6000 kg Texto/língua de tela: alemão/alemão Equipamento/equipamento adicional Puxão do núcleo: x2 Interface robô / Interface robô

ENGEL DUO 3550H-500M / 800 WP Robô Viper ENGEL 40

Máquina Angel 2-K ERC robô anjo

A partir de hoje, 92.434 horas de funcionamento, O diâmetro do parafuso é de 190 mm. Agregado 45050. L/D 22 Parafuso de barreira com peça mista. Distância de dosagem 900 mm deslocamento 25.520 m2. Peso a cerca de 18 kg. Comprimento da máquina 17.418 mm Largura da máquina 4.300 mm Altura da máquina 3436 mm Peso da máquina 156 para. Com panela de óleo Robô ERC 125/0-F, / Ano da construção 2006 Luzes Holab distância 2.000 x 1.600 mm (h / v) Placas de fixação 2.900 x 2.500 mm (h / v) Espaçamento da placa máxima 3.800 mm Min ferramenta de instalação altura 800 mm Altura de instalação da ferramenta max 1.800 mm 32 zonas de aquecimento Núcleo puxa 2 peças lado fixo / 4 lado móvel Fecho da agulha / cascata hidráulica 10 peças Fecho de agulhas / cascata pneumática 8 peças

Oferta: Engel Duo 940H/940 M/650 Combi Ano 2011 2x Viper Robot 40 PS: Máquina livre de cerca de 08/2021

clamping force: 4.000 kN injection volume: 735 cm³ screw diameter: 60 mm platen size: 1.400 x 1.030 mm Condition: used, Specification: horizontal injection moulding machine, factory no: Injection unit 1: - screw diameter: 60 mm - metering stroke: 200 mm - Screw speed: 226 rpm - Injection flow: 351 cm³/sec - Injection volume: 735 cm³ - Spec. injection pressure: 1.489 bar - Spec. injection pressure increased: 2,011 bar Injection unit 2: - Screw diameter: 40 mm - Metering stroke: 140 mm - Screw speed: 400 rpm - Injection flow: 197 cm³/sec - Injection volume: 251 cm³ - Spec. injection pressure: 1.286 bar - Spec. injection pressure increased: 2.029 bar Clamping unit: - Clamping force max.: 4,000 kN - Clamping platens: 1,400 x 1030 mm - Opening stroke: 954 mm - Max. platen distance: 1,520 mm - Ejector stroke: 250 mm - Ejector forc ...

clamping force: 800 kN injection volume: 78 cm³ screw diameter: 25 mm platen size: 570 x 552 mm Condition: used, Specification: injection moulding machine for LSR - used Nr. 13EN08 clamping unit: - clamping force: 800 kN - size of heating platen: 570 x 552 mm - Between tie bars horizontally: 405 mm - Between tie bars vertically: 345 mm - Opening stroke: 310 mm - Ejector force: 25.4 kN - Ejector stroke: 100 mm - Mould installation height max.: 530 mm - Mould installation height min.: 250 mm - Bar diameter: 60 mm - Control: CC 90-A0 Injection unit: - Injection volume max.: 78 cm³ - Injection weight max.: 90 g - Screw diameter: 25 mm - Metering stroke: 160 mm - Screw speed max.: 20 - 400 rpm - Injection flow: 87 g/sec - Injection flow (increased): 64 g/sec - Specific injection pressure: 2400 bar - Nozzle stroke:  ...

clamping force: 800 kN injection volume: 154 cm³ screw diameter: 35 mm platen size: 570 x 552 mm Condition: used, Specification: injection moulding machine for LSR - used Nr. 13EN12 clamping unit: - clamping force: 800 kN - size of heating platen: 570 x 552 mm - Between tie bars horizontally: 405 mm - Between tie bars vertically: 345 mm - Opening stroke: 310 mm - Ejector force: 25.4 kN - Ejector stroke: 100 mm - Mould installation height max.: 530 mm - Mould installation height min.: 250 mm - Bar diameter: 60 mm Injection unit: - Injection volume max.: 154 cm³ - Injection weight max.: 156 g - Screw diameter: 35 mm - Metering stroke: 160 mm - Screw speed max.: 20 - 320 rpm - Delivery flow: 35 g/sec - Injection flow: 148 g/sec - Injection flow (increased): 107 g/sec - Specific injection pressure: 1600 bar ...

clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 16 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1451 bar - Spec. injection pressure increased: 2205 bar - Nozzle path: 530 mm - Operating hours: 54716 h - Pump drive  ...

clamping force: 250 kN injection volume: 49 cm³ screw diameter: 25 mm platen size: 300 x 300 mm Condition: used, specification: C-frame injection moulding machine - used clamping unit: - clamping force: 250 kN - heating platen size: 300 x 300 mm - clamping/opening stroke: 330 mm - Closing direction: from below - Lateral ejector: yes - Ejector stroke/force: 115 mm / 12 kN Injection unit: - Injection volume max.: 49 cm³ - Screw diameter: 25 mm - Screw length: 16 - Screw speed max.: 250 rpm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE - Connected load: 55 kW/92 A - Weight approx.: 3,500 kg Various accessories are also available: - Injection unit (25 screw) - 2 heating plates - Funnel and various small parts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 1.300 kN injection volume: 106 / 43 cm³ screw diameter: 30 / 25 mm platen size: 850 x 750 mm daylight between platens - max.: 900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 2000 kN injection volume: 251 cm³ screw diameter: 40 mm platen size: 1.050 x 900 mm daylight between platens - max.: 880 mm Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Wei ...

clamping force: 450 kN injection volume: 99 cm³ screw diameter: 30 mm platen size: 860 x 320 mm closing stroke: 406 mm Condition: used, Specification: C-Frame Injection Moulding Machine - second-hand Serial No.: 45083 Clamping unit: - Clamping force: 450 kN - Opening travel: 406 mm - Heating plate size: 860 x 320 mm - Mould height min.: 264 mm - Max. plate spacing: 464 mm - Ejector stroke: 20 mm - Ejector force: 20 kN Injection unit: - Screw diameter: 30 mm - Screw length L/D: 17 - Dosing stroke: 140 mm - Stroke volume max.: 99 cm³ - Max. spray weight: 114 g - Screw speed: 20 - 300 rpm - Injection flow: 106 cm³/s - Injection flow increased: 71 cm³/s - Special injection pressure: 1450 bar - Spec. injection pressure increased: 2210 bar - Nozzle path: 200 mm - Operating hours: 54716 h - Pump drive  ...

clamping force: 1.750 kN injection volume: 318 cm³ screw diameter: 45 mm platen size: 700 x 700 mm daylight between platens - max.: 460 mm Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Referência: 18092 Produtor: ENGEL Ano construção: 2001 Unidade de fixação Força de fixação: 300 ton Curso de abertura: 855 mm Tamanho do platen (h x v): 1050 x 650 mm Unidade de injeção Diâmetro do parafuso: 60 +35 mm Volume de injeção: 735 +135 cmPeso do projeção: 662 + 122 g Pressão de injeção : 1834 +1620 bar Medidas e peso Dimensoes: 7,75 x 2,35 x 2,6 m Peso da máquina: 25250 quilogramas

Referência: 18255 Hersteller: ENGEL Ano construção: 2004 Unidade de fixação Força de fixação: 180 ton Curso de abertura: 750 mm Distância entre barras de ligação: 960 x830 mm Altura do molde min.: 500 mm Largura de abertura: 1250 mm Unidade de injeção Diâmetro do parafuso: 45 mm Volume de injeção: 318 cm³ Peso de disparo: 302 g Pressão de injeção : 1769/2360 bar Medidas e peso Peso da máquina: 13500 kg Robot Produtor: Wittman Tipo: W743 Ano: 2009

Máquina de moldagem por injeção R14, fabricante: ENGEL, tipo: victory 140 ecodrive dentro 330H/200V/140 combi, ano de fabricação: 2019, ler horas de operação (h): 17.415, número de série: 228 874, peso: 11.200 kg, força de fixação hidráulica: 1.400 KN, espaçamento máximo da placa: 1.200 mm, altura do molde: min. 600 mm, força de ejeção: 61 KN, distância de ejeção: 150 mm, comprimento do ejetor: com plataforma giratória FoBoha 74 mm, número de puxadores do núcleo hidráulico: 5, aquecimento de energia elétrica / motor: 16/30 kW, Volume de pulverização: 113/69 cm³, especificações. Pressão de pulverização: 2.400/2.400 bar, broca: 30/25 mm, bico de raio: 15, com manuseamento SEPRO Multi Inject 20, ano de fabrico: 2019, n.º de série: R 006 783-01, incluindo plataforma giratória FOBOHA e vedação de barreira, + 1 gira-discos WEBER

Máquina de moldagem por injeção R15, fabricante: ENGEL, tipo: victory 140 ecodrive dentro 330H/200V/140 combi, ano de fabricação: 2019, leitura horas de operação (h): 6.560, número de série: 228 875, peso da máquina: 11.200 kg, força de fixação hidráulica: 1.400 KN, espaçamento máximo da placa: 1.200 mm, altura do molde: min. 600 mm, força de ejeção: 61 KN, distância de ejeção: 150 mm, comprimento do ejetor: para plataforma giratória FoBoha 74 mm, número de puxadores do núcleo hidráulico: 5, aquecimento de energia elétrica/motor: 16/30 kW, volume de pulverização: 56/35,6/34 cm³, especificação. Pressão de pulverização: 2.400/2.400/2.400 bar, broca: 22/18u/18o mm, bico de raio: 15, com manuseio SEPRO MI-20, ano de fabricação: 2019, número de série: R 006 783-02, incluindo cerca de barreira, + 2 conjuntos de pulverização diâmetro 25/30 mm

Máquina injetora R12, fabricante: ENGEL, tipo: victory 140 ecodrive 330H/200V/140 combi, ano de fabricação: 2018, ler horas de operação (h): 12.005, número de série: 225 448, peso da máquina: 10.300 kg, força de fixação hidráulica: 1.400 KN, espaçamento máximo da placa: 1.200 mm, altura do molde: min. 600 mm, força de ejeção: 61 KN, distância de ejeção: 150 mm, comprimento do ejetor: para plataforma giratória FoBoha 74 mm, número de puxadores do núcleo hidráulico: 5, aquecimento/motor de energia elétrica: 16/30 kW, volume de pulverização: 56/35,6/34 cm³, especificação. Pressão de injeção: 2.400/2.400/2.400 bar, broca: 22/18u/18o mm, bico de raio: 15, incluindo plataforma giratória FOBOHA, + 2 conjuntos de pulverização diâmetro 20/30 mm, + item 1634: 1 Manuseamento SEPRO Multi Inject 20, ano de fabrico: 2018, n.º de série: R 006 187-01, incluindo ved ...

Clamping force: 7000kN, screw diameter: 40mm, screw speed: 300/min, metering stroke: 200mm, controls: Engel CC300, weight: 22t, operating hours: 3871h, with electric 6-station turntable, electric quick adjustment machine clamping platen moving side, two injection units, 2x 3-zone screw D45mm, 32 hot runner control zones, electric plasticising units and documentation.

Closing force: 180t, weight: 12.2t, operational hours counter: 24,492h, with Handling Sepro S 5.35, fence, conveyor and documentation, an inspection is possible.

Weight: 9.1t, the machine is leaking and the control card is missing.

Clamping force: 200t, max. operating temperature: 400°C, clamping plate dimensions: 1020x605mm, min. tool installation height: 680mm, opening path: 400mm, max. tool weight: 3,2t, shot weight: 50- 600g, screw diameter: 55mm, L/D20, with 2x core puller hydraulic 1-fold, 2x core puller pneumatic, 1-fold mold temperature control, standard up to 90°C, an on-site inspection is possible.

Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible.

Injection molding machine: clamping force: 5000kN, opening stroke: 1109mm, max. mold weight per plate/total: 5300kg/10600kg, drying time: 4.15s. Injection units: Unit 1: screw diameter: 90mm, injection flow: 623cm³/s, max. injection pressure: 2000bar. Unit 2: Screw diameter: 50mm, injection flow: 295cm³/s, max. injection pressure: 2000bar. Weight (without oil): Clamping unit: 33350 kg, injection unit: 9000 kg. ENGEL Viper 20 robot: max. manipulation weight: 17kg, max. vertical workpiece size: 600mm, travel X/Y/Z: 700mm/1300mm/3320mm. Total height of robot and machine: 4250mm, compact C-axis: pneumatic, torque: 30Nm, range: 0°-90°. Documentation available.

Y-travel: 1000mm, z-travel: 3800mm, connected load: 4kW.

Weight: 200kg, an inspection is possible.

Clamping force: 275t, injection weight: 455g, cylinder diameter: 55mm, max. opening distance: 850mm, weight: 20t, operational hours counter: ca. 63,000h, including documentation, a set of new pumps and Handling GEIGER LR 16 EC, the handling needs overhauling.

Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20.

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2019 in Austria and has 11781 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 2 units are available.

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available.

This ENGEL Victory 2050H/650v/350 Combi injection moulding machine was manufactured in 2015. It boasts significant capabilities with a clamping force of 350 tons and an injection pressure of 1480 bar. The machine offers a maximum injection volume of 808.17 cm³ horizontally and 294.52 cm³ vertically, enhancing its versatility. Additionally, it is equipped with special accessories like Valves + control, an Index plate, and a Viper robot 40 for automated removal. Reach out for more information about this injection moulding machine.

This injection moulding machine, manufactured in 1999, has a robust design, weighing 53 tons, with a closing force of 11000 Kn. It includes hydraulic closing, M24 clamping threads, an ENGEL robot for automation, and a swivel mechanism for enhanced versatility, making it ideal for efficient, large-scale production. Reach out to us for further details on this ENGEL 1100 T injection moulding machine.

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2001 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. It comes with a linear robot ENGEL ERC 23/2-EA (2002). Production hours are at 98167.

This Engel ES 650/150 HL Injection moulding machine was manufactured in the year 2001 and has 17798 hours. It is equipped with an Engel EC 100 control unit. The machine has a clamping force of 2000 kN and a screw diameter of 45 mm. Includes a Robot ERC 43 /2-E.

This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2017 in Austria and has 50249 production hours. It is equipped with a Engel CC300 control unit. The machine is all-electric and energy efficient. It has fast, dynamic, and highly precise movements through a five-point toggle lever clamping system with low friction platen guidance on precision linear bearings. The machine is still at the production and can be checked upon request. Full service documentation and manuals.

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2002 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. Production hours are at 94904.

This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2015 in Austria and has 53893 production hours. It is controlled by an ENGEL CC300 control unit. The machine has a clamping force of 3800 kN.

Engel Injection Moulding Machine e-Cap 3440/420 T. Consider this machine had a new list of 447k in 2013 – see attached. Today new price is around 650k. Working hours is only 18384. Machine from 2012 and still in production Clamp force to/ kN 420/4200 Opening force kN 420 Opening stroke mm 700 Mold height max. mm 750 Mold height min. mm 350 Mould fixing platens h x v mm 1350 x 1350 Tie bar distance hor. x vert. mm 920 x 920 Ejector stroke mm 220 Ejector force forward / return kN 120 mold weight, max on moving platen/center of gravity1 kg/mm 6200 / 315 Dry operation time sec @ imm 2.1 @ 600

Were parting with our 2 injection molding machines following a reorganization of our workshop. The 1st press were selling is an Engel 200/50 HL-ST (photos in attachment), which works well but has a few jerks during the injection phase, but is functional. The 2nd press is a Demag Ergotech 150-600 (photos in PJ), which works but has a few problems, and can no longer be considered a 150T but rather a 90T (pump wear).

Description: Machine number: 44575 Spindle diameter 25 mm Stroke 120 mm Spindle speed 380 rpm Max. screw torque 300 nm Max. injection volume 127.6 cm³/s Max. stroke volume 58,9 cm³ Max. injection pressure 2400 bar Max. injection power 42 kW Nozzle stroke 600 mm Nozzle pressure force 14 kN Installed heating power 6.8 kW Closing force 1000 kN Opening stroke 420 mm Mould installation height max. 420 mm, min. 150 mm Ejector force 23 kN Ejector stroke 130 mm Increased clamping plate 740 x 700 mm Width of ejector shaft 470 mm Dry running 1.6 s ENGEL CC 100 control system, 1 pneumatic core pull Tool heating circuits 8 Internal pressure switch KISTLER Nominal voltage : 3x400 + N+ PE /50 Hz Switching load : 95 Kw Rated current : 145 A Voltage control : 230 v AC / 24v DC Approx. Onsite Dimension. (l x w x h): 2,900 x 1,900 x 1,600 mm, weight approx.: 9,500 kg

Description: Clamping force: 1,100 kN screw diameter 35 mm incl. discharge conveyor, Engel ERC 23/2-F handling robot Internal number: E 110/1 M2332 SN: 163486, incl. documentation Dimensions: Machine dimensions: (LxWxH): 5100 x 1580 x 2080 mm Wittmann W823-0240 Dimensions: (LxWxH): 2700 x 1350 x 2200 mm Conveyor belt on Euro pallet Dimensions: (LxWxH): 2120 x 800 x 880 Safety fence on Euro pallet Dimensions: (LxWxH): 2150 x 840 x 650 mm Carrier on Euro pallet Dimensions: (LxWxH): 2500 x 1300 x 900 mm Temperature control unit on Euro pallet Dimensions: (LxWxH): 1200 x 800 x 800 mm Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 7,400 kg

Description: operating hours: approx. 33489 hrs. 3axis robot IMM type: Thermoset IMM serial number: 199583 clamping force: 180 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 154 cm3 max. spec. injection pressure: 1595/2177 max. stroke opening: 1050 mm max. mould thickness: 1050 mm min. mould thickness: 300 mm tie bars distance horizontal (mm): without tie bars tie bars distance vertical (mm): without tie bars locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 180 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 1,950 x 5,200 x 2,900 mm, weight approx.: 14,200 kg

Description: 3axis robot IMM type: Thermoset IMM serial number: 199583 clamping force: 180 Tonnen production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 154 cm3 max. spec. injection pressure: 1595/2177 max. stroke opening: 1050 mm max. mould thickness: 1250 mm min. mould thickness: 500 mm tie bars distance horizontal (mm): without tie bars tie bars distance vertical (mm): without tie bars locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 180 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW injection valve missing  , please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 1,950 x 5,200 x 2,900 mm, weight approx.: 14,200 kg

Description: Serial number: 24904, Own weight: 21,000 kg Equipment: Tie-bar-less, including rail guide underneath INFO: Device can be dismantled and is available at short notice Location: A-2435 Ebergassing Approx. Onsite Dimension. (l x w x h): 5,000 x 2,680 x 2,800 mm, weight approx.: 21.000 kg

Description: Serial number: 28619, weight: 44,000 kg, Injection unit: Screw diameter 90 mm, metering stroke: 390 mm, screw speed 5-125 r/min, plasticizing flow: 80 g/s, injection flow: 442 g/s, max. stroke volume: 2,481 cm³, max. injection weight: 2,233 g, specific injection pressure: 1,300 bar, nozzle stroke: 600 mm, nozzle contact force: 150 kN, heating power: 56 kW, number of heating zones INC.nozzle 6, weight of injection unit: 11 t Clamping unit: Clamping force: 3,500 kN, clamping force: 3,850 kN, opening stroke: 700 mm, ejector force: 70 kN, ejector stroke: 240 mm, mold installation height max. 880 mm, min. 300 mm, ramp platen total size: 1,640 x 1,640 mm, tie bar diameter: 140 mm, weight of clamping unit: 33 t, oil filling: 580 l, Equipment: toggle lever equipment Note on condition: all peripherals possibly visible in the photo, such as robot arm, etc., are not included in the  ...

Description: Serial number: 46984, weight: 10,000 kg Clamping unit: Mold height min. 795 mm, max. 1,500 mm, opening stroke: 1,205 mm, piston diameter: 125 mm, rod diameter: 90 mm, number of cylinders: 1 Clamping force max. stroke: 1,200 mm, piston diameter: 600 mm, number of cylinders: 1, flow rate pumps 390 l/min, speed: 17 mm/s, ejector: stroke 250 mm, piston diameter: 85 mm, rod diameter: 63 mm, number of cylinders: 1 Equipment: Tie-bar-less Attention: the lot only includes the injection molding machine, other peripherals such as robot arm, etc., as shown in the photo, are not included in the lot, but including staircase platform INFO: Production must be stopped to remove the equipment, so it would be preferable to dismantle the system during the interruption in summer (end of July, beginning of August). Location: A-2435 Ebergassing Approx. Onsite Dimension. (l x w x h): 10,331 x 2 ...

Description: Serial number: 42169, Own weight: 7,000 kg Injection unit: Screw diameter: 80 mm, metering stroke: 310 mm, max. stroke volume: 1,558 cm³, screw speed: 183 rpm, standard screw length: 20 L/D, plasticizing capacity: 90 g/s, injection flow: 478 cm³/s, specific injection pressure: 1,400 bar, specific injection pressure increased: 1. 640 bar, nozzle stroke: 650 mm, nozzle pressing force: 110 kN, heating power: 34 kW, number of heating zones including nozzle: 5, pump drive power: 55 kW, oil filling main tank: 1,000 l, oil filling suction tank: 850 l, weight of injection unit: 7 t Clamping unit: Clamping force 6,000 kN, opening force: 300 kN, moving cylinder force: 150 kN, opening stroke: 1,200 mm, mold installation height min. 800 mm, platen distance max. 2,000 mm, platen size HOR.X.WERT. 1,580 x 1,300 mm, ejector stroke: 250 mm, ejector force: 110 kN, weight of clamping unit: 4 ...

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 28 rpm -Power: 0.05 kW -Construction: B3 -Diameter shaft: Ø 12 mm -Protection class: IP 54 -Dimensions: 210/180/H120 mm -Weight: 4.5 kg