Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360
Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360
Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg
Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg
Description: technical data see pictures Approx. Onsite Dimension. (l x w x h): 900 x 850 x 450 mm, weight approx.: 50 kg
Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 500 kg
Description: type: A05B-1215-B651 serial number: R03X75249  , max. weight at wrist: 12 kg max. reach: 1441 mm  , number of axes: 6 working range: A1: 340° (370°) A2: 235° A3: 455° A4: 380° A5: 360° A6: 900° axis speed: A1: 260°/s A2: 240°/s A3: 260°/s A4: 430°/s A5: 450°/s A6: 720°/s  , please also have a look at the PDF document of this robot Approx. Onsite Dimension. (l x w x h): 2,000 x 1,500 x 1,800 mm, weight approx.: 250 kg
Description: 70.000 hours read from controller before machine was dismantled laser capacity: 3 kW, operating hours of laser: 70.000 h, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,050 x 750 x 2,080 mm
Description: clamping force: 350t daylight: 1250 minimum mold thickness: 300 - 650 tie bar spacing: (H x V) 810 x 710 platen size: (H x V) 1130 x 1030 clamp stroke: 600 ejector stroke: 200 ejector rod diameter: 28 mm screw diameter: 56 mm maximal injection volume: 640 ㎝³ maximum injection pressure: 225 MPa number ,of strokes approx. 3,500,000 number ,of injections is approx. 2,700,000 locating ring diameter (F:M) 160 hydraulic core (Fixed/Move) 0/0  , on switchboard picture are red marked modules that are missing in the machine machine was in operation before the cards were removed machine will be delivered with ,documentation, backup data not available, can be obtained from FANUC  , please also have a look at the PDF documents of this ,machine Approx. Onsite Dimension. (l x w x h): 8,000 x 2,750 x 2,000 mm, weight approx.: 14,600 kg
Description: Model 12P/8000, No. C915K0627, 200 V, 4-pole, 5.5/7.5 kW, 21/29 A, 750/8000 rpm Approx. Onsite Dimension. (l x w x h): 600 x 250 x 320 mm, weight approx.: 117 kg
Description: Model 10S, No. C915A4361, 150 V, 8-pole, 7.6 A, 12 Nm, 2000 rpm Approx. Onsite Dimension. (l x w x h): 350 x 180 x 210 mm, weight approx.: 20 kg
Description: No. ES1501567 A, more details: see photos Approx. Onsite Dimension. (l x w x h): 500 x 300 x 300 mm, weight approx.: 21 kg
Description: No. 1044699, more details: see photos Approx. Onsite Dimension. (l x w x h): 420 x 250 x 200 mm, weight approx.: 7 kg
Description: No. F14 28479-B, more details: see photos Approx. Onsite Dimension. (l x w x h): 470 x 260 x 200 mm, weight approx.: 10 kg
Description: No. F15 26084-B, more details: see photos Approx. Onsite Dimension. (l x w x h): 450 x 170 x 150 mm, weight approx.: 4 kg
Description: No. N240519104, more details: see photos Approx. Onsite Dimension. (l x w x h): 450 x 260 x 250 mm, weight approx.: 6 kg
Description: Serial number: 0089D3145 Incl. robot cell Interior dimensions: approx. 1300 x 1000 mm Incl. gripper from the manufacturer SCHUNK Approx. Onsite Dimension. (l x w x h): 2,500 x 2,000 x 2,200 mm, weight approx.: 700 kg
Power supply, switching power supply, power supply, CNC control, E-STOP UNIT -Manufacturer: Fanuc, E-STOP UNIT CNC control emergency stop unit -Type: A05B-2400-C451 -Dimensions: 315/100/H180 mm -Weight: 5 kg
Servo Amplifier Module -Manufacturer: FANUC -Type: A05B-2400-C060 -Number: 1x converter available -Price: per piece -Dimensions: 380/120/H190 mm -Weight: 2 kg
Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Shaft: Ø 48 mm -Height shaft axis: 157 mm -Construction: B3 -Dimensions: 615/320/H330 mm -Weight: 128 kg
Mains choke, mains filter, frequency converter, frequency converter, drive converter, line filter. Reactor , reactor, suppression choke -Manufacturer: Fanuc, mains choke Reactor -Type: A81L-0001-0156 -Dimensions: 125/105/H135 mm -Weight: 6,3 kg
Mains choke, mains filter, frequency converter, frequency converter, drive converter, line filter. Reactor , reactor, suppression choke -Manufacturer: Fanuc, mains choke Reactor -Type: A81L-0001-0156 -Dimensions: 130/105/H140 mm -Weight: 5.6 kg
DC spindle motor, electric motor, direct current motor, servo motor -Power: 5.5/7.5 kW -Speed: 1160/3500 rpm -Shaft: Ø 48 x 110 mm -Construction: B3 -Additional cooling -Dimensions: 780/330/H260 mm -Weight: 200 kg
Servo Amplifier Module, CNC Control System, plug-in card, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6058-H334 -Dimensions: 450/250/H180 mm -Weight: 9.6 kg
AC Spindle Servo Unit, Servo Amplifier Module, CNC Control System, plug-in card, converter device, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6055-H108 -Dimensions: 310/500/H300 mm -Weight: 35 kg
Servo Amplifier Module, CNC Control System, plug-in card, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A02B-0094-B502 -with: 7x plug-in cards -Dimensions: 560/400/H255 mm -Weight: 12.2 kg
AC spindle motor, electric motor, DC motor, servo motor -Spindle motor comes: from a Hitachi Seiki type HC400 machining center -Manufacturer FANUC Model 10S Type: A06B-0315 -Power kW -Speed: 2000 rpm -Shaft: Ø 35 mm -Construction: B14 -Number: 3x motors available -Price: per piece -Dimensions: 430/174/H174 mm -Weight: 28 kg
AC spindle motor, electric motor, DC motor, servo motor -Spindle motor comes: from a Hitachi Seiki type HC400 machining center -Manufacturer FANUC Model 6 Type: A06B-1006-B700 -Power: 5.5/7.5 kW -Speed: 1500/6000 rpm -Shaft: Ø 32 mm -Construction: B14 -Brake -Dimensions: 700/260/H250 mm -Weight: 65 kg
Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, spindle motor, permanent magnet three-phase servo motor, permanent magnet DC servo motor, DC spindle motor -Manufacturer: Fanuc, DC Spindle Motor -Type: 3-S TG 6 -Shaft: Ø 42 x 110 mm -Dimensions: 830/220 / H288 mm -Weight: 70 kg
DC spindle motor, electric motor, direct current motor, servo motor -Power: 11.5 / 18.5 kW -Speed: 1160/3500 rpm -220 V -79/96 A -Tachometer: 6V/krpm -Shaft: Ø 50 mm -Construction: B3 -Additional cooling -Dimensions: 910/340/H400 mm -Weight: 200 kg
This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document).
This FANUC Robocut Alpha 0iE CNC Wire Cut EDM Machine was manufactured in 2013 and is equipped with a FANUC 31i-WA control. It has 5 axes (X-axis: 370 mm / Y-axis: 270 mm / Z-axis: 255 mm / U-axis: 60 mm / V-axis: 60 mm) and can operate with a maximum workpiece weight of 500 kg. In total it has operated 17,500 hours from which 4,850 are cutting hours.
This FANUC Robocut α-1iA erosion machine was made in the year 2000 in Japan. It is equipped with a Fanuc Series 18i-W control unit. The machine has a max work table load of 1000 kg.
This Fanuc Robodrill a-T21iEL Vertical Machining center was manufactured in the year 2006 in Japan. It is equipped with a Fanuc Series 31i-A5 control unit. The machine has a spindle speed of 12000 rpm.
This FANUC ARC Mate 100i Robot machine was manufactured in 2000 in Netherlands. It has 6 axes and a payload capacity of 6 kg (13 lbs). It offers a reach of 1368 mm (54 in) with a repeatability of ±0.1 mm (.0039 in). It operates at the following motion speeds: J1-J3 at 120 °/s (2.09 rad/s), J4-J5 at 360 °/s (6.28 rad/s), and J6 at 450 °/s (7.85 rad/s). Its motion range includes J1 at -330°, J2 at -210°, J3 at -299°, J4 at -380°, J5 at -280°, and J6 at -640°. Contact us anytime for further information.
This FANUC Robocut ALPHA-0B Erosion machine was manufactured in the year 1995. It is equipped with a Fanuc Series 16-W control unit and has 4 axis. The machine has a wire tension: 0-2500 g.
[embed]https://youtu.be/tU4z-j-vDnw[/embed] FANUC ALPHA 0iB - 2003 Máquina de corte de arame EDM
Fanuc Robodrill Alpha-T14ifb Tapping Machine 10000 rpm 5 inches diving head(Nikken) Machine is in good working condition
Fanuc Robodrill D14LiB Plus Vertical Machining Center Machine is like new condition Table size : 850 mm x 410 mm X : 700 mm Y : 400 mm Z : 330 mm 10 pieces of tool holder, and some other tools will be given together with machine
Controlo CNC no painel de controlo / terminal do operador de máquinas Controlo web CNC FANUC tipo A14B - 0048 - 0002 Ano construção: 1990- Painel de controle da máquina- volante eletrônico - Teclado PC de silicone flexível Dimensões LxAxP: 600 x 260 x 350 mm Peso: aprox. 40 kg Do estoque, função não testada, ideal como transportador de peças de reposição.; usados