usava FASTI para venda

Universal Folding Former, Pasta FASTI Type 81501 Fabr. No. 928151 015 Ano de construção 1992 Espessura máxima da folha: 1,5 mm Espessura mínima de 0,5 mm Número de estádios de rolos 7 peças Altura do perfil aprox. 20 mm Distância central dos veios de desconto 100 mm Altura de trabalho 900 mm Velocidade de trabalho 7 e 14 m/min. Potência do motor 2,3 / 3 kW (polo comutável) Conexão de rede 400 volts, 50 Hz. - duas velocidades através de motor de acionamento comutável por poste- Conjunto de rolos padrão nº 5 para costura de pé simples e dupla- Conjunto de rolos nº 11 para costura dobrável- Rolos centrais para dobra em S - Par de rolos para a produção de cames de bloqueio em uma costura de pé- Manual de instruções com plano elétrico Requisitos de espaço L x W x H 1500 x 660 x 1100 mm Peso 450 kg muito bom estado; usados

sheet width:5040 mm plate thickness:2 mm total power requirement:12 kW weight of the machine ca.:9,4 t dimensions of the machine ca.:6200× 1300 ×1900 mm working width:5000 mm control:Fasti Matik stroke of upper beam:500 mm adjustment of lower beam:u.Biegewange 80 mm control cabinet:1000 x 850 x1450 mm Documents:vorhanden

Description: Furnishing: - Digital display - Bending angle preselection Sheet width 2040 mm Sheet thickness 3.0 mm Stand width 2100 mm Bending angle max. 135 degrees Total power requirement 4.0 kW Machine weight approx. 2.2 t Dimensions L-W-H 23.1 x 1.0 x 1.7 m weight approx.: 2,200 kg, Approx. Onsite Dimension. (l x w x h): 3,100 x 1,000 x 1,700 mm

Description: Sheet width 2040 mm Sheet thickness 2.0 mm Stand width 2100 mm Bending angle max. 135 degrees Total power requirement 1.5 kW Machine weight approx. 1.7 t Dimensions L-W-H 2.9 x 1.0 x 1.7 m weight approx.: 1,700 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 1,000 x 1,700 mm

Description: Round bending machine - round roll manually - type 102/10/1.5 max. rolling length 1020mm max. sheet thickness 1.5 mm Roller diameter 65 mm Training machine is in used but very good condition. plate width: 1,020 mm, mat. thickness when pre-bending when rounding: 1,5 mm, number of rolls: 3, weight approx.: 190 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 450 x 1,100 mm

Electric clutch, electromagnetic clutch for guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, eccentric press -for: guillotine scissors crank guillotine scissors -Equipment: clutch, transformer, control -Manufacturer: LABOD electronic -Type: GN 6 DZ.4Q.80 -Total net weight: 160 kg

Punch, punching machine, punching device, hole punching machine, row punch, punching unit, Mehrkopfpstanze, punching system, -Distribution: 8 x punching pairs with a distance of 60 mm (O 4 mm) -Distance between the two outer punch pairs: 975 mm - Distribution: distance 75 - 165 - 165 - 165 - 165 - 165 - 165 - 75 mm -Max. Passage width: 1000 mm -Drive: electric -Weight: 260 kg

Punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system, -Number: 5x punching -Max. Width: 1000 mm -Tool built-in: 8x45 mm -Distance punch: 187 mm -driven: electric -Weight: 280 kg

Plate shears, sheet metal shears, sheet metal shears, crank plate shears, guillotine shears -Manufacturer: Fasti, mechanical guillotine shears type 506/20/2 -Cutting width: 2030 mm -Max. Cutting thickness: 2.0 mm -Back gauge: adjustable by hand -Throat: 545 mm -Stroke: continuous stroke / single stroke / tapping -Setup dimensions: 2505/1650/H1150 mm -Transport dimensions: 2505/1100/H1150 mm -Weight: 1200 kg

Bending tool, die, upper knife, upper tool, upper beam -Tool: comes from a Fasti type 211-32-2.5 folding machine -Transfer in current condition as seen -partially damaged -Pointed tool -Dimensions: 75 x 15 mm -Length: 3041 mm -Weight: 23 kg

Press brake, bending bench, bending machine, folding machine, die bending machine -Handover: in current condition as seen -Note: the right side of the upper beam was repaired (welded) -Condition: fully functional -Manufacturer: Fasti, folding machine type 2095-25-2 -Max. Working width: 2540 mm -Max. Sheet thickness: 2 mm -Opening width: 290 mm -Connected load: 3.7 kW -Clamping: via threaded spindle -Bending angle: adjustable via potentiometer -Dimensions: 3615/1790/H1780 mm -Total weight: 2760 kg -Handover in current condition as seen

Fold former, folding machine, form folding machine, profiling machine, profiling system -Transfer: in the current condition as seen -Machine: has no motor and is therefore sold as a spare parts carrier -Profiling stations: 7 pieces -Sheet thickness max: 1.5 mm -max web height: 20 mm -1x set of rollers: -Work shaft diameter: Ø 28 mm -Center distance of the working shafts: -vertical: mm -horizontal: mm -Dimensions: 1460/740/H1050 mm -Weight: 352 kg

Fold former, folding machine, form folding machine, profiling machine, profiling system -Max. Working width: 1260 mm -Profiling stations: 7 -Sheet thickness: max. 1.0 mm -2x set of rollers -Motor: 0.55/3.6 kW -Connection: 400 volts -Dimensions: 3150/1100/H1200 mm -Weight: 1700 kg

largura da folha: 2040 mm espessura da placa: 3,0 mm abertura à luz do dia: mm distância entre colunas: 2100 mm altura máxima de trabalho: mm : máx. 135 Grad potência total necessária: 4,0 kW peso da máquina ca.: 2,2 t gama L-W-H: 23,1 x 1,0 x 1,7 m Mobiliário: - Pré-seleção do ângulo de flexão- Ferramenta segmentada- conjunto de curvatura adicional- backgauge manual- Dokumentation

largura da folha: 2040 mm espessura da placa: 2,0 mm abertura à luz do dia: mm distância entre colunas: 2100 mm altura máxima de trabalho: mm : máx. 135 Grad potência total necessária: 1,5 kW peso da máquina ca.: 1,7 t gama L-W-H: 2,9 x 1,0 x 1,7 m Mobiliário: - Pré-seleção do ângulo de flexão- Ferramenta segmentada- conjunto de curvatura adicional- backgauge manual- Dokumentation

sheet width: 2040 mm plate thickness: 3 mm daylight upper clamping: 350 mm bending angle max.: 0-135 ° adjustment of lower and bend clamping: 80 mm control: Fastimatic M200 power requirement: 2,2/1,5 kW weight of the machine ca.: 2460 kg dimensions of the machine ca.: 3,2 x 2,8 x 2,1 m Condition: ready for operation: Condition: very good: CE signed: Electric 400 Volt: CNC-control with screen: Mot. back gauge: 1000 mm Foot switch: Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Please notice that the price of a new CNC-machine in this  ...

sheet width: 1020 mm plate thickness: 1,25 mm pre-bending: 1 mm roll diameter: 55 mm weight of the machine ca.: 180 kg dimensions of the machine ca.: 1,5 x 0,5 m Manual plate bending machine with asymmetrical roller arrangement, rollers made of material 70 kg/mm² strength, adjustment of the lower rollers with eccentric infeed, rear roller with handwheel infinitely adjustable via worm gear, rear roller inclination for conical rounds, folding groove at the top and wire insert grooves at the bottom. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 3,0 mm distance between columns: 2500 mm back stop - adjustable: 1000 mm upper clamping bar adjustment: 350 mm total power requirement: 4,62 kW dimensions: 3800 x 2300 x 1750 mm weight of the machine ca.: 3050 kg - lateral protective wall - 1x dual free-moving footswitch - 1x free moving footswitch - Electrically controlled back gauge with rear sheet metal support surface - with ball rollers - incl. new hydraulic pump (value approx. 4000€) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largura da chapa: 3000 mm de espessura da placa: 2,0 mm de distância entre colunas: abertura de 3240 mm : ângulo de flexão de 350 mm máx.: 0 - 135 regulação do feixe inferior: capacidade de potência de 80 mm : Requisito total de potência de 2,2 / 1,5 kW : peso de 3,7 kW da máquina ca.: 3,4 t dimensões da máquina ca.: 4,3 x 1,1 x 1,6 m

sheet width: 2035 mm plate thickness: 6 mm distance between columns: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 5,00 mm distance between columns: mm upper beam stroke: 350 mm stroke bending beam: 80 mm total power requirement: kW weight of the machine ca.: 7,50 t dimensions of the machine ca.: 4,20 x 2,90 x 2,30 m Furnishing - Upper beam stroke: 350mm - Motorized folding beam adjustment - controlled backgauge 1000mm (1500mm with repositioning) - Control Fm100 - Geissfusssatz divided height approx. 130mm - Sharp rail 45 ° - Bending bar: 15mm, 20mm + reinforcement bar 35mm - Radius rail R16mm, length 2000mm - Radius rail R30mm, length 1000mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

largura da folha: 2040 mm espessura da placa: 1,25 mm pré-flexão: requisito de potência total: kW peso da máquina ca.: t dimensões da máquina ca.: m Rotação direita e esquerda através do interruptor de pé Acionamento de 3 rolos Interruptor do cabo de segurança possível Arredondamento cónico

largura da folha: 4000 mm espessura da placa: 4,00 mm distância entre colunas: mm potência total requisito: kW peso da máquina ca.: 8,50 t dimensões da máquina ca.: m Medidor traseiro controlado até 1.000 mm Paradas laterais e extensões da mesa limitação do comprimento de corte iluminação de ponta Cerca de proteção, enrolável com interruptores de segurança

largura da folha: 1040 mm espessura da placa: 4,00 mm distância entre colunas: mm requisito de potência total: kW peso da máquina ca.: 1,60 t dimensões da máquina ca.: m Calibre traseiro manual até 550 mm Extensões de mesa e paragem lateral A área traseira é protegida por uma cerca de proteção com barreiras de luz Faca afiada Instruções de utilização disponíveis

largura da folha: 2040 mm espessura da placa: 2,00 mm distância entre colunas: mm requisito de potência total: kW peso da máquina ca.: 1,50 t dimensões da máquina ca.: m Ajuste motorizado do feixe superior via interruptor de pé Contas de cabra

largura da folha: 1020 mm espessura da placa: 2,00 mm distância entre colunas: mm requisito de potência total: kW peso da máquina ca.: 0,65 t dimensões da máquina ca.: m O feixe superior pode ser girado para fora Ângulo de flexão ajustável via potenciômetro A altura de elevação pode ser pré-selecionada através da escala Modo de flexão manual e automático possível

Largura da folha: 1030 mmplate espessura: 2,50 mmdistância entre colunas: requisito de potência mmtotal : kW peso da máquina ca.: 1,00 tdimensionais da máquina ca.: manómetro traseiro ajustável mMotorizado até 1.000 mm em 2 velocidades com display digital Suporte de folhas

largura da folha: 2040 mm espessura da placa: 6,00 mm distância entre colunas: mm curso: 300 mm requisito de potência total: kW peso da máquina ca.: 6,00 t dimensões da máquina ca.: 3,25 x 1,50 x 1,80 m - Trilho agudo- Trilho de curvatura 35 mm - Ajuste do ângulo de flexão convencionalmente via potenciómetro - Braços traseiros de suporte de chapa metálica- Documentos técnicos

largura da folha: 1030 mm espessura da placa: 2,50 mm distância entre colunas: mm requisito de potência total: kW peso da máquina ca.: 0,80 t dimensões da máquina ca.: m Calibre traseiro ajustável manualmente até 530 mm Ajuste do ângulo de corte Paragem lateral e extensão da mesa Faca afiada

largura da folha: 3000 mm espessura da placa: 10,00 mm distância entre colunas: mm potência total requisito: kW peso da máquina ca.: 10,00 t dimensões da máquina ca.: 3,60 x 2,50 x 2,05 m • Medidor traseiro controlado 10 - 1000 mm• Parada angular 1600 mm • 3 braços de suporte adicionais• Ajuste automático da folga de corte• Ajuste automático do ângulo de corte• Iluminação de borda de corte• Limite de comprimento de corte

sheet width: 2040 mm plate thickness: 3,00 mm distance between columns: mm bending angle: 135 ° upper beam stroke: 350 mm engine output: 4 kW total power requirement: kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 3,20 X 1,60 X 0,90 m - with different OW rails, especially segmented tools - Footswitch - Manual operation Machine is repaired, checked, cleaned by a specialist and is then complete functioning. Test run is carried out. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

largura da folha: 2040 mm espessura da placa: 2,00 mm distância entre colunas: mm requisito de potência total: kW peso da máquina ca.: 1,80 t dimensões da máquina ca.: m Processo de flexão manual e automático possível Ângulo de flexão ajustável via potenciômetro A altura do curso do feixe superior e a espessura do material podem ser pré-selecionadas através de interruptores DIP Trilho de curvatura polido

sheet width: 1040 mm plate thickness: 4,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,20 t dimensions of the machine ca.: m Bending rail ground The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Largura da chapa: 2.100 mm se de espessura: 3 mm distância entre colunas: 2.100 mm peso da máquina ca.: 3 t

Espessura da placa: máx. 1,5 mm de largura da folha: máx. 1.020 mm Ano: ca. 1970 manual:

largura da folha: 103 mm peso: 300 kg unidade: ja : Gußhebel abgebrochen

plate thickness: 3.0 mm throat: max. 500 mm work speed: 6.0 + 12.0 m/min distance: Walze 125 / 150 mm roll diameter: 125 mm voltage: 400 V total power requirement: 1.3 / 1.8 kW weight of the machine ca.: 1250 kg range L-W-H: 1200 x 800 x 1200 mm good condition () Furnishing: - heavy / robust beading machine - electric motor drive - Manual delivery of the top roller using a handwheel - pole-changing motor - 1x adjustable stop plate - 1x freely movable double foot switch - original instruction manual Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9475037 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1520 mm plate thickness: 4.50 mm thickness at Niro-steel: 2.25 mm distance between columns: 1600 mm stroke of upper beam: 360 mm work height max.: 900 mm adjustment: UW 100 mm total power requirement: 8.25 kW weight: 3000 kg range L-W-H: 2480 x 975 x 2080 mm Furnishing: - robust motorized folding machine 2x drive motors with 4.0 KW each - swiveling control panel, front right - Angle adjustment via electric. Potentiometers including digital actual values 1x coarse adjustment / 1x fine adjustment Adjustment 0.1 degrees - Manual & automatic mode selectable - Coding switch for opening width of the upper beam - 1x bending tool set - manual adjustment of the lower beam - 1x freely movable double foot switch - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355099 Machine video: https://www.youtube.com/watch?v=hC_j3FqEE ...

sheet width: 2540 mm plate thickness: 2.50 mm distance between columns: 2600 mm daylight opening: OW 300 mm adjustment: UW 115 mm pivoting angle: 180 Grad work height max.: 910 mm back stop - adjustable: bis 690 mm voltage: 400 V total power requirement: 3.8 kW weight: 2250 kg range L-W-H: 3640 x 1750 x 1600 mm maintained condition () Furnishing: - robust electro-motive folding machine - Bending angle adjustment via electric potentiometer infinitely adjustable with digital value display - manual % automatic mode selectable - Electrical adjustment of the travel paths of the upper beam - manual lower beam adjustment up to 115 mm - 1x set of bending tools (installed / used condition) - freely movable double foot switch - manual material back gauge, adjustable at the back Adjustment range up to max. ~ 690 mm - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/date ...

pressure: 80.0 t chamfer lenght: 2550 mm distance between columns: 2060 mm ajustment speed: 90.0 mm/sec working feed: 10.0 mm/sec return speed: 90.0 mm/sec stroke: 140 mm work height max.: 930 mm dayligth: 375 mm Number of working hours: ca. 1.300 h total power requirement: 8.5 kW weight: 6300 kg range L-W-H: 2830 x 1900 x 2500 mm Machine from a vocational training center (Chamber of Crafts) good / well-maintained condition with only approx. 1.300 operating hours () Furnishing: - CNC electro-hydraulic press brake - DELEM CNC control - model DA 58 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC axis control: Y1 - Y2 - X axis + motorized crowning - electro-motorized & controlled backgauge with 2x manually movable stop fingers (R+Z axis) - manual upper tool & lower tool clamping - split upper and lower tools - 2x stable, front  ...

sheet width: 1270 mm plate thickness: 1,75 mm ST plate thickness: 2,00 mm ALU plate thickness: 2,50 mm KU thickness at Niro-steel: 0,80 mm distance between columns: 1300 mm daylight opening: OW ~ 380 mm work height max.: 900 mm adjustment: UW 60,0 mm bending angle max.: 180 ° weight: ca. 200 kg kg range L-W-H: 2000 x 520 x 1500 mm good condition () Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355182 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 3.25 mm throat: 100 mm no. of strokes: 60.0 Hub/min back stop - adjustable: 530 mm voltage: 400 V engine output: 7.5 kW weight: 2450 kg range L-W-H: 3600 x 1000 x 1560 mm Furnishing: - robust electric motorized guillotine shears - stable, front support/work table - Front control panel - including emergency stop button - manual back gauge up to approx. 700 mm - adjustable by handwheel, with analogue mm scale display - 1x front side stops - 3x front support arms - manual cutting gap adjustment - Cut/lift confirmation by foot pedal - 1x freely movable foot switch - rear sheet metal slide - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325320 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mm plate thickness: 2.5 mm pre-bending: 2.0 mm diameter of upper rolls: 110 mm side roll diameter: 110 mm diameter of lower rolls: 110 mm speed: 6.0 m/min voltage: 400 V total power requirement: 1.5 kW weight of the machine ca.: 1250 kg range L-W-H: 3020 x 670 x 1010 mm Furnishing: - robust electro-mechanical three-roller drive - Driven by spur gear brake motor + countershaft - asymmetrical roller arrangement - electrical delivery of the rear roller with automatic electrical switch-off Setting min./max. travel distance possible - Rotatable control panel, front right - swing-out top roller, with folding bearing - Conical bending device - freely movable double foot switch Right/left rotation of the rollers - Manual delivery of the bottom roller using a handwheel with analogue position display - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/ ...

sheet width - max.: 1255 mm plate thickness: 4,0 mm ST plate thickness: 2,0 mm VA plate thickness: 6,0 mm ALU number of strokes - loaded: ~ 66 Hübe/min. cutting angle: 1,5 ° total power requirement: 5,5 kW weight of the machine ca.: 2600 kg. range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition () Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325278 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1540 mm plate thickness: 2.0 mm roll length: 1540 mm roll diam. toproll: 98.0 mm roll diam. bottom roll: 98.0 mm roll diameter: SEIT 80.0 mm adjustment: SEIT 90.0 mm bending speed: 6.0 m/min engine output: 1.10 kW weight: 590 kg range L-W-H: 2070 x 670 x 1010 mm Furnishing: - motor-driven asymmetrical 3-roller round bending machine - solid construction guarantees the required accuracy - hardened rollers (700 N/mm²) - manual folding storage for quick removal of the workpiece - Double foot switch for R/L running - Rear roller manually adjustable, with analogue position display Adjustment range 0 - 90.0 mm - lower roller manually adjustable - electrical safety device - Connection cable + plug - Operation manual Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9401272 The data for this ad was created with ModulMWS - the software solution ...

sheet width - max.: 2035 mm plate thickness: 6.0 mm ST plate thickness: 4.0 mm VA plate thickness: 8.0 mm ALU number of strokes - loaded: 20 Hübe/min cutting angle: 1.7 ° work height max.: 900 mm Number of working hours: 1.450 h Control: LENORD total power requirement: 11.0 kW weight of the machine ca.: 4100 kg range L-W-H: 2416 x 2250 x 1760 mm Machine from prototype construction Machine with only approx. 1.450 operating hours () Furnishing: - electro-hydraulic guillotine shears - electro-motorized backgauge with NC control unit (Lenord + Bauer) - electrical cutting length limitation - manual cutting gap adjustment - 1x stable side stop, with scale and tilting cam - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF) + circuit diagram Special accessories included: - pneumatic sheet metal holding device for thin sheet metal cuts Machine link: http: ...

Largura da chapa: 3040 mm de espessura da placa: 4 mm de distância entre colunas: / mm total prescrição de potência: / kW peso da máquina ca.: / t espaço necessário: / m

NC controlled edge bending machine, manufactured by Fasti Germany type 212-20-6 - 2050 x 6 mm. Thickness of bent steel sheet (St40) 6 mm - Alu 8 mm, INOX 4 mm, bending length 2050 mm. Control of the bending angle and departures of the NC bumper. Manual and automatic operation mode. Setting the bending angle to max. 135 degrees. Electro-mechanical drive. Jaw opening 350 mm. 6 kW drive. Weight 4500 kg.

CNC controlled edge bending machine, prod. Fasti Germany type 212-30-4 - 3040 x 4 mm. Bending sheet thickness Steel(St40) 4 mm- Alu 8 mm, INOX 3 mm, bending length 3040 mm. Control of bending angle and bumper departures from CNC, programs. Setting the bending angle to max. 135 degrees. Hydraulic-mechanical drive. Jaw opening 350 mm. Drive 6 kW. Weight 4500 kg.

CNC-controlled edge bending machine, manufactured by Fasti Germany type 215-32-4 - 3240 x 4 mm. Thickness of bent steel sheet (St40) 4 mm - Alu 8 mm, INOX 3 mm, bending length 3040 mm. Control of bumper departures with CNC, programs. Setting the CNC bending angle and bending radius. Hydraulic drive. Jaw opening 350 mm. 6 kW drive. Weight 6000 kg. High sectional punches for channels. Documentation