usava HBM para venda

saw-blade dia.: 210 mm Cutting height: 70 x 305 mm Cutting height at 45°: 35 x 305 mm saw blade turning speeds: 4500 U/min Motor output: 1,5 kW machine weight ab.: 9 kg Dimensions (L/W/H): 340 x 500 x 740 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

largura das tiras: 100 mm de comprimento da banda: 915 mm dimensões da roda de moagem: 100 x 915 mm quadro de trabalho:: 225 x 155 mm total de potência: 0,44 kW peso da máquina ca.: 0,018 t dimensões da máquina ca.: 0,56 x 0,26 x 0,3 m

rated capacity: 7,9 kVA rated current: 32/16 Ampere electrics - voltage/frequency: 230+400 / 50 V/Hz tank capacity: 12 l engine output: 13 PS total power requirement: 7,9 kW weight of the machine ca.: 0,152 t dimensions of the machine ca.: 0,95 x 0,55 x 0,8 m Diesel generator with: - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled - Mobile. - Direct injection - Low oil level alarm with auto-stop function. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Frequência de carga conectada: 230 V pesos: 4,7 kg range L-W-H: 620 x 240 x 180 mm output: 0,8 Dimensão da banda de cintura KW grões: 40 x 760 mm bos diameter max.: 180 mm band speed: 2,4 - 9,1 m/s

Largura da chapa: 1270 mm se de espessura: 2,0 mm desistância entre colunas: abertura 1300 mm: 48 mm : 135 destéris de potência: Handbetrieben peso da máquina ca.: 0,4 t dimensionals da máquina ca.: 1,6 x 0,9 x 1,2 m Segment-flexão de larguras : 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 e 260mm.

largura das tiras: comprimento 150 mm: 1220 mm dimensionals da roda de moagem: 225 mm se:: 150 x 400 mm Secável até: 90 Grad de superfície: 150 x 130 mm frequência de carga ligada: 230 V despesto de potência: 0,75 kW peso da máquina ca.: 35 Kg dimensionais da máquina ca.: 650 x 360 x 400 mm

Largura do material: 305 mm se de espessura material: 1,0 mm spes: von Hand pesos: 45 Kg dimensionais: 500 x 340 x 420 m Máquina de trabalho de chapa de chapa com: -Flexão, larguras da ferramenta 25 - 50 - 75 - 75 - 105 mm. - Rolos, diâmetro de rolo 38 mm tesouras, máx. 1015 x 1mm

0: 680 x 450 x 430 mm pressão de funcionamento: 3 - 6 bar Consumo de ar: 250 l/min. peso da máquina ca.: 28 Kg : 0,76 x 0,5 x ,75 cm

largura das tiras: 100 mm band: 915 mm dimensionals da roda de moagem: 100 x 915 mm se:: 225 x 155 mm to Requisito de potência máxima: 0,44 kW peso da máquina ca.: 0,018 t dimensionais da máquina ca.: 0,56 x 0,26 x 0,3 m

range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Comprimento da tabela: largura da mesa de 910 mm : 500 mm altura da mesa: 350 - 1300 mm de peso máximo.

bore capacity in steel (diameter): 35 mm throat: 230 mm bore stroke: 125 mm spindle taper: ISO 40 spindle turning speed range: 115 - 1750 U/min : 560 mm : 175 mm table surface area: 1000 x 240 mm max. distance between table and spindle-nose: 375 mm connected load frequency: 400 V total power requirement: 0,85/1,5 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,3 x 1,2 x 2,1 m Domestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Left / right switch. Emergency stop switch Pivot head swiveling Spindle protection. Small toolbox Machine base and X-axis feed optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gama de moagem: ângulo 2 - 13 mm de canto min./max.: 90 - 140 Grad basta de ligação: 230 V pesos da máquina ca.: 10 Kg dimensionais da máquina ca.: 0,35 x 0,2 x 0,2 m

Largura do material: 1015 mm se de espessura material: 1 mm spes: von Hand pesos: 240 Kg dimensionais: 1420 x 600 x 750 m

largura das tiras: comprimento banda de 75 mm: 2000 mm band velocidade: 30 m/seg total de potência: 3 kW pelho da máquina ca.: 70 t dimensionais da máquina ca.: 1,2 x 0,5 x 0,75 m

Largura do material: 300 mm espessura do material: 2,0 mm : máx. 90 Grad peso: 12 Kg dimensões: 400 x 250 x 100 m Máquina de trabalho combinado de chapa metálica com: - Flexão, largura da ferramenta 25 - 50 - 75 - 75 - 105 mm. - Rolos, diâmetro de rolo 38 mm - tesouras, máx. 1015 x 1mm

range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

largura das tiras: comprimento de 100 mm band: 610 mm se:: 170x125 / 265x150 mm : velocidades de 16 mm versas: 2000 U/min rol de diâmetro: 16, 23, 29, 41 und 53 mm d 53 mm total prescrição de potência: 0,45 kW peso da máquina ca.: 114 Kg dimensionais da máquina ca.: 0,6 x 0,5 x 0,5 m

range L-W-H: 780 x 480 x 1050 mm weight: 79,5 kg : 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 , 3/8, 1/2 . Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 745 x 525 x 915 mm weight: 93,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 830 x 530 x 530 mm pressão de funcionamento: 2,2 - 5,5 bar Consumo de ar: 250 l/min peso da máquina ca.: 50 Kg : 0,95 x 0,65 x ,7 cm

diâmetro: 200 mm de altura: 105/265 mm de altura central: 105 mm de peso da máquina ca.: 41 kg dimensões da máquina ca.: 400 x 330 x 310 m

0: 945 x 605 x 605 mm pressão de funcionamento: 2,2 - 5,5 bar dimensional: 1,0 x 0,61 x 1,65 m : 1300 x 1000 x 750 cm Consumo de ar: 250 l/min. peso da máquina ca.: 0,09 t

feed pressure: 8 bar Effective free air delivery: 120/85 L/min Receiver capacity: 30 Liter weight of the machine ca.: 50 kg. Number of cylinders: 2 0 motor: 230V / 0,75KW V / KW range L-W-H: 570 x 640 x 800 mm Quiet professional 30 liter compressor Noise level approx. 40 - 45 DB (A) This compressor is delivered as standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve at the bottom. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 305 mm Cutting height: 105 x 340 mm Cutting height at 45°: 60 x 340 mm saw blade turning speeds: 5000 U/min Motor output: 2,0 kW machine weight ab.: 25 kg Dimensions (L/W/H): 700 x 570 x 980 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mm throat: 180 mm bore stroke: 85 mm spindle taper: MK 2 spindle diameter: 47 mm spindle turning speed range: 320 - 3300 U/min : 230 mm : 100 mm table surface area: 420 x 155 mm connected load frequency: 230 V : 900 x 600 x 300 cm total power requirement: 0,75 kW weight of the machine ca.: 8o Kg dimensions: 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 290 x 270 mm column diameter: 92 mm turning speeds: 150 - 2450 U/min feeds: 0 mm/U total power requirement: 1,1 kW weight of the machine ca.: 95 kg range L-W-H: 0,66 x 0,8 x 1,7 m Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

corrente de soldadura: 30 - 200 A frescos: 230 V peso: 3,6 kg Dimensionals (LxWxH): 290 x 135 x 2600 mm Orçar de entrega: A máquina de soldadura BUDDY TIG 160 Electrode e cabo de terra 3m TIG tocha ET 17 4m Gas com porca de união

feed pressure: 8 bar Effective free air delivery: 85/120 L/min Receiver capacity: 10 l / 8 bar l / bar weight of the machine ca.: 21 kg. Number of cylinders: 2 Stk. motor: 230V / 0,75KW V / KW range L-W-H: 465 x 3800 x 575 mm This compressor is delivered as standard with: - Maintenance-free oil-free engine. - safety valve. - Reduction valve with pressure gauge and clutch. - Drain tap on the tank. - Italian compressor of the highest quality. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: 2,6 / 3,0 KW rated current: 16/8,3 Ampere output voltage: 2 x 230AC / 1 x 12DC V tank capacity: 18 l engine output: 6,5 PS weight of the machine ca.: 45 Kg dimensions of the machine ca.: 0,68 x 0,58 x 0,54 m Exhibition machine The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 1170 x 880 x 825 mm pressão de funcionamento: 2,5 - 8,0 bar dimensionais: 1,33 x 1,24 x 1,77 m a pressão aérea a 6 bar: 350 l/min peso da máquina ca.: 0,16

0: 1170 x 580 x 580 mm pressão de funcionamento: 2,2 - 8,0 bar dimensional: 1,22 x 0,93 x 1,70 m consumo de ar a 6 bar: 350 l/min peso da máquina ca.: 0,15

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 125 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 1,25 x 0,6 x 0,6 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK 2 spindle turning speed range: 50 - 3000 U/min : 280 mm : 155 mm table surface area: 500 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,8 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

largura das tiras: comprimento da banda de 100 mm : velocidade da banda de 2000 mm : 15/30 m/seg de diâmetro do tubo: 20 - 76 mm de ângulo ajustável de - para: 30 - 90 Grad frequência de carga ligada: 20 - 76 mm de ângulo ajustável de - para: 30 - 90 Grad frequência de carga ligada: Requisito total de potência de 400 V : 2,5 /3,3 kW peso da máquina ca.: 0,19 t dimensões da máquina ca.: 1,2 x 0,75 x 0,7 m

turning diameter over bed: 290 mm turning diameter over slide rest: 170 mm turning length: 750 mm turning speeds: 75 - 2000 U/min centre height: 145 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK tailstock quill stroke: 80 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 1,3 x 0,75 x 0,7 m 2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gama de moagem: ângulo 20 mm de canto min./máx.: 90 - 135 Carga grad connected: 230 V pes de peso da máquina ca.: 8,6 Kg dimensionais da máquina ca.: 0,35 x 0,2 x 0,2 m

feed pressure: 8 bar Effective free air delivery: 200 / 175 L/min Receiver capacity: 50 Liter weight of the machine ca.: 77 kg. Number of cylinders: 4 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 580 x 780 x 820 mm Quiet professional 30 liter compressor Noise level approx. 40 - 45 DB (A) This compressor is delivered as standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve at the bottom. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacidade 90 graus: redonda: 125 mm capacidade 90 graus: quadrado: 125 mm : 127 x 125 mm estas de serragem: 1435 x 12,7 x 0,0,0,0, 0,0 Velocidade banda de 65 mm: 38 - 80 m/min deseto à potência máxima: 0,95 kW pelho da máquina ca.: 18 kg dimensionais: 720 x 380 x 450 m

largura das tiras: comprimento banda de 100 mm: 915 mm dimensionais da roda de moagem: 200 mm caminha:: 170x125 / 265x150 mm Requisito de potência máxima se de 0,5 kW da máquina ca.: 26 Kg dimensionais da máquina ca.: 0,6 x 0,5 x 0,3 m

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including extraction

Power 0.75 kw

Incl manifold

Mounted on a mobile cart.

IGBT Technology, 200A inverter with digital display