usava HOMAG para venda

  Modelo
lista de observados

Modelo
(Fabricante: HOMAG)

0,23kW 18000U/min 2
0-380-03-0497 1
1 MB RAM und PC Cobtroller 1
1-005-15-0020 1
1-005-16-0000 D 1
1-007-34-0001 1
1-026-26-0030 2
1-055-12-0050 2
1-056-11-0400 1
1545/500/H361 mm 1
1555/500/H272 mm 1
1558/295/H280 mm 1
1600/295/H278 mm 1
1715/370/H342 mm 1
1958/295/H276 mm 1
2 Achser HC 010 o.Analogeingang 2
2-083-01-5003 1
2-083-01-5004 1
2-083-01-5101 1
2-083-01-5102/5103 1
2-083-01-5105 1
2-083-01-5201 1
2-083-01-5202 1
2-083-01-5203 1
2-083-01-5403/04 1
2-083-01-5404 1
2-083-01-5405 1
2-083-01-5406 1
2-083-01-5406/07 1
2-083-01-5408 1
2-083-01-5800 1
2-083-01-5903 1
2-083-01-5905 1
2-083-01-6303 1
2-083-01-6902 1
2-083-01-8100 1
2-083-02-7006 1
2-083-02-7013 1
2-083-02-7022 1
2-083-02-7106 1
2-083-02-7420 1
2-083-02-7921 1
2-083-02-8075 1
20/30/12/G 1
20/50/16/V/G 1
2004 neugewickelt 1
2083015407 1
2083027407 1
211 Venture 22 L 1
3,5 HD 52 MB 1
310/9/A20/S2 1
3240/295/H280 mm 1
3575/295/H275 mm 1
3818 1
4 Motoriges Kopieren 1
4,4kW 2860U/min 1
4-00570 1
4-008-39-0001 1
4-008-39-0002 1
4-008-40-0144 1
4-02078 1
4-060-24-0165 1
4-075/02/0036 1
4-075/02/0038 2
4-086-05-0113 1
4-086-05-0262 1
480/1210/H290 mm 1
5 Fach 1
8 Fach Wechsler 1
83.51 1
83.56 1
83.65 1
Anschlag System 1
auf KF Homag 1
aus KFL 10 1
Ausgangskarte 1
Ausgangskarte 16x220V 1
Bandbreite mm 1
BARGSTEDT TBH22/D/25/12 1
BAZ 20 - 50 -12 1
BAZ 20/50/16/V/KA 1
BAZ 41/K OPTIMAT (1) 1
BAZ20/50/16/K 1
BHX 050 1
BHX 200/D 1
BMG 512 1
BOF / BAZ20/50/18/2/D 1
BOF 311 Venture 15L 1
BOF 311/40/21/r WORKING CENTER 1
BOF 32/30/K 1
BOF 41/K Optimat 1
BUS 3-15/30-30-004 1
CH 03 32 32 PLUS 1
CPU HC020 SPS II 1
CPU Karte 1
CPU PC Controlleinheit 1
CPU Umlade-RAM 512 I/O 1
DA-10-2 1
Diskettenlaufwerk und Festplatte 1
Drehgeber für Strecke 1
Drilltec V-200 Optimat BHX055 1
DRILLTEQ V500 2
Druckzonenrevolver 1
EDGETEQ S-500 KAL370 Ambition 1
Ein und Ausgangskarte 1
Ein und Ausgangskarten Streckensteuerung 1
Eingabeeinheit mit LCD Anzeige und Tastatur 1
Eingangskarte 1
Eingangskarte 32x24V 1
F5 1
FKR 78/C/A/S3 1
FL 20/05/25 - TD 31/30/13 - FL 64/30/II+1000 1
FL 20/06/30/S 1
FL 20/07/15/S 1
FL 62/25 1
Formfräsen / contour milling 1
Formsttrecke 1
FPL620/06/15/P S/LQ 1
FS 11/FS 10 1
Genius 20/50/14/G 1
Genius 20/50/16/V/G 1
GENIUS BAZ 20/30/14/3/D(2) 1
Größe 10930/500/H262 mm 1
Größe 11370/498/H240 mm 1
Größe 2525/498/H268 mm 1
Größe 2925/494/H447 mm 1
Größe 4050/498/H268 mm 1
Größe 7550/460/H196 mm 1
Größe 9090/460/H350 mm 1
HD SCSI 10TE CPU 30 1
Herstellung Türrohlinge 1
Hmag-2/mit ACR 1 Ausgang 1
HO0028895 1
Homatic 8
Homatic Achskarte 1
Homatic Steuerung Ausgangskarte 1
Homatic Streckenprozzesorkarte 1
Homatic Streckenprozzessor 1
Hubschwingen für schwere Teile 1
JOKER BAZ 41 1
K 11/13 1
KAL 210 AMBITION 2264 1
KAL 210/7/A20/S2 1
KAL 211 Ambition 2274 1
KAL 310 2
KAL 310 310/6/A3/S2 1
KAL 310/7/A20/S3 1
KAL 310/7/A3/S2 1
KAL 310/8/A20/S2 1
KAL 310/9/A20/S2 2
KAL 330/6/A3/S2 1
KAL210 AMBITION 2264 2
KAL210 AMBITION 2264 - ZHR 05/L/085 1
KAL211 EDITION 2264 1
KAL310/8/A20/S2 1
KAL330 1
Karte Seco 6 X RS 232 1
KF 20/13/QA/10 + KF 20/15/25/QA 1
KF 20/20/QA/15 1
Kf 62 1
KF66/17/6A/10 1
KFL 10/42/QE/S 1
KFL 54/KFL 53 1
KFR 21 und KFL 21 inkl.Winkelübergabe 1
KFR20/16/QA/15-TWR24/30/12/S-KFR20/19/QA/25 1
KL 10/18/QA 1
KL 10/21/QA 1
KL 76/A20 1
KL 78/A20/S2 2
KL 79 1
KL 79/2/A20/S2 1
KL77/A20 1
KLO 76 1
Konvertierungskarte CPU/30/E16 4 x RS 1
LF-40-C-KA 1
LF-40CKA 1
LF-55 CKA 1
LF-55-C-KA 1
LF-55-C-ST 1
LF-55-L 2
LF-55-L-KA 3
LF-55CST 2
LF-64-C 2
LF-64-L 1
LF-64L 1
MAC93C-0-FS/4HC/110-A-0 1
mit 2 Perske Motor 2
mit 2x Perske Motoren 2
mit 3 Perske Motor 1
mit Fügefräsaggregat 2
mit Gummiprofil 1
mit langer Welle 4
mit Oszillation 4
mit Perske Motor 8
mit Perske Motoren 14
mit Polierbürste 1
Mouldteq M-300 Fenster 1
Nachputzeinrichtung Leimfuge 1
NC 20 1
NFL 26/6/10/PW/L 1
Optimat BAZ 232/40/K 1
OPTIMAT BAZ 31/60/K 1
Optimat BAZ 311/40/K 1
Optimat BAZ 311/52/K 1
OPTIMAT BAZ 311/60/K 1
Optimat BOF / 40 / G 1
Optimat BOF 211/52/K 1
OPTIMAT BOF 211/VENTURE 12L 1
Optimat BOF 311/60/K 1
OPTIMAT BOF 612/34/13/2 K 1
OPTIMAT JOKER BAZ 41 1
OPTIMAT KAL 310/6/A3/S2 1
Optimat KAL 310/9/A20/S2 1
Optimat KL 78/A20/S2 1
OPTIMAT LPP306 1
P KF 20/24/QA/30 1
PC Steuerung Ausgangskarte 2
PN10 1
Pneumatische Mittenunterstüzung 1
Power FL 14/10/12/CF 1
Power FR 20/09/15/L/Q1 1
Profi BAZ/20/40/14/3/KA 1
PS10 1
PSE 4225 DP-M 1
Putzaggregat / buffing unit 1
Q 34 2
Quickmelt 1
R2 Radius HSK63 1
Rechnerkarte 1
Ritzmotor FPL 526 1
Ritzsäge Nachschwenkeibrichtung für lin 1
Rollendruckzone 1
Rollenlänge 120 mm 1
Schlosskastenaggregat 1
Schnellwechselköpfe FK 11 / FK 13 1
Schwabbelaggregat / Buffing unit 1
Schwabbelaggregate 1
ser 8808 B 1
SEW 1
SPS II 12 MHz 1MB RAM 1
Streckenprozessor 1
Streckenprozessor 4 Achser 1
SV.5.430/2 1
TD 12 / 25 1
Teile von KF Maschine 1
Transportband 1
UPTIMAT BAZ 32/50/G 1
verstellbar 3
Verstellweg 100 mm 1
VFL 75 1
VFL 79/02 1
VFR10/22 1
xxx 1
 
Categoria: 209 outras máquinas para trabalhar madeira
Última atualização: 19.03.2024 adicionar à lista de observados
Máquina: HOMAG OPTIMAT KAL 310/6/A3/S2
Número do item: 157442378
 Ano de construção: 2006
usava

HOMAG OPTIMAT KAL 310/6/A3/S2

Máquina de quadratura e banda de borda de um lado

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21

Categoria: 209 outras máquinas para trabalhar madeira
Última atualização: 19.03.2024 adicionar à lista de observados
Máquina: HOMAG VFL 79/02
Número do item: 157442380
 Ano de construção: 1993
usava

HOMAG VFL 79/02

Máquina de pós-formação

Single sided postforming line, capable of doing L - and U profiles, with or without insert. Workpiece thickness: 16 to 60 mm. Min. workpiece width: 150 mm. Workpiece overhang: 70 mm. Max. laminate overhang: 105 mm. Feed speed 3 - 18 m/min. Fence side at the left Equipment: Squaring and shaping part: 1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate 1 x scoring, motor 1 kW, top position 1 x milling unit for the laminate when doing U profiles 1 x laminate support Postforming part 1 x blow cleaning nozzle 6 x glue nozzle for the glue application 2 x glue roller 9 x IR heating, each 2,2 kW 2 x Hot air blower, each 10 kW 1 x Basic postforming pressure zone for L-profiles, using rollers 1 x Basic postforming pressure zone for U-profiles, using rollers 1 x VF postforming pressure zone for special profiles, using pressur ...

Categoria: 209 outras máquinas para trabalhar madeira
Última atualização: 19.03.2024 adicionar à lista de observados
Máquina: HOMAG FL 20/05/25 - TD 31/30/13 - FL 64
Número do item: 158541416
 Ano de construção: 1995
usava

HOMAG FL 20/05/25 - TD 31/30/13 - FL 64/30/II+1000

Linha de tenoner de duas extremidades

machine 1: Fixed side at the left, working width 220 mm to 2500 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 10 - 40 m/min Chain infeed taking 1,62 m. panels in front of the dogs Panel alignment at the infeed Middle support NC 30 controlls Equipment left and right: 1+1 Jump universal shaper 6 kW 1+1 Twin hogging unit, motors 6,6 kW (2 motors) 1+1 Universal shaper 6 kW 1+1 Jump universal shaper 6 kW panel turning device HOMAG TD 31/30/13 Year 1989 machine 2: Fixed side at the left, working width 220 mm to 3000 mm Workpiece overhang max. 110 mm Electronic width adjustment Panel thickness 8 - 90 mm Top pressure by belts Rolling chain with automatic lubrication, automatic pop-up dogs every 1000 mm Feed speed 8 - 40 m/min Chain infeed taking ...

Categoria: 209 outras máquinas para trabalhar madeira
Última atualização: 19.03.2024 adicionar à lista de observados
Máquina: HOMAG KAL210 AMBITION 2264 - ZHR 05/L/
Número do item: 162541701
 Ano de construção: 2012
usava

HOMAG KAL210 AMBITION 2264 - ZHR 05/L/085

Máquina de quadratura e banda de borda de um lado

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Categoria: 209 outras máquinas para trabalhar madeira
Última atualização: 19.03.2024 adicionar à lista de observados
Máquina: HOMAG KAL 310/9/A20/S2
Número do item: 162541703
 Ano de construção: 2008
usava

HOMAG KAL 310/9/A20/S2

Máquina de quadratura e banda de borda de um lado

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Categoria: 209 outras máquinas para trabalhar madeira
Última atualização: 19.03.2024 adicionar à lista de observados
Máquina: HOMAG KL 78/A20/S2
Número do item: 163609823
 Ano de construção: 1999
usava

HOMAG KL 78/A20/S2

Máquina de quadratura e banda de borda de um lado

Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood Equipment: Help carriage feeding the panels rectangular automatic fence at the infeed Squaring device: 2 x 3,0 KW Panel edge pre-heater Hot melt unit: QA34 / A20 edge magazine Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW Rough trimming: 2 x 1,5 KW Top/bottom fine trimming, tilting, 2 x 0,4 kW Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers Universal milling motor 4kW Profile scrapers Flat scrapers Buffing unit with oscillation Controlls: HOMATIC NC16

RESALE used machinery 25 years online