usava IMA para venda

Fabricante: IMA, Peça de reposição da máquina: Vorschmelzbehälter, Tipo: für Verleimteil,

Fabricante: IMA, Tipo: Man.Kantenanleimer HKA, Material de borda Min-max mm: 0,4-3, Largura de trabalho min-max mm: 100, Min.-max. comprimento da peça de trabalho em mm: 100, Altura da faixa de borda: 16-45, Alimentação Min-max m/min: 0,7-1,2,

Fabricante: IMA, Peça de reposição da máquina: Compacto, Tipo: Verleimteil, Tamanho do rolo: 0,8 l, parte de colagem do lado esquerdo: sim,

Fabricante: Homag Sonderverleimteil<CRLF>Schrägkante, Peça de reposição da máquina: Homag, Tipo: Verleimteil, Ano: 1999, Ano :1999

Fabricante: IMA, Peça de reposição da máquina: IMA AVM, Tipo: Verleimteil, parte deglução do lado esquerdo: sim,

Fabricante: IMA, Peça de reposição da máquina: IMA Compact, Tipo: Verleimteil, Parte deglução do lado esquerdo: sim,

Fabricante: IMA, Peça de reposição da máquina: Compacto, Tipo: Verleimteil, Tamanho do rolo: 0,8 l, parte de colagem do lado esquerdo: sim,

Fabricante: IMA Fräsständer tastend, Tipo: VS.40.09.-2, FREETEXT1: 2 Motore tastend, FREETEXT2: 1 Kw, FREETEXT3: 133 Volt, FREETEXT4: 11500 Umin, FREETEXT5: 200 Hertz,

Fabricante: IMA Verleimteil aus Combima, Tankvolumen Liter: 1, TEXTO LIVRE: Verleimteilhöhe 60 mm/,

Fabricante: IMA Verleiteimteil gereinigt, Peça de reposição da máquina: IMA Combima, parte deglução do lado esquerdo: sim, Tankvolumen Liter: 1, Min-max altura de cola mm: 60 mm,

Fabricante: IMA Ersatzteil Combima, Tipo: Verleimteil, Tankvolumen Liter: 1,

Fabricante: Perske, Ano: ca 1993, Tipo: Umformer, KVA: 7,5, Ano :ca 1993

Manufacturer: IMA OBK, Type: OBK, Year: 1996, Premilling: yes, Profile milling: yes, Profil sanding: no, Edgeband thickness max mm: 60, Thickness of coiled edgeband max mm: 1, Panel length min mm: 300, Work piece thickness min mm: 100, Feeding speed max m/min: 5-30, Machine lenght mm: 11000, Pressure zone star: yes, Pressure zone exchange system: 4-fach, Strip magazin: no, Trimming saw: yes, Flush milling: yes, Scraper: yes, Buffing unit: 2 Stück, Glue system granulate/cartridge: granulat, Spraying device: yes, Noise enclosure: yes, Compressed air bar: 6, Maschine kann vorgeführt werden , Year :1996

Fabricante: IMA, Tipo: Vorschubgetriebe, Ano: 1993, FREETEXT1: aus IMA Combima 1993, FREETEXT2: FDR 132S/4 Q B60, FREETEXT3: 1440 U/min, FREETEXT44: 5 kw, Ano :1993

Fabricante: IMA, Tipo: Schwabbeln einfach, Ano: 1993, FREETEXT1: aus IMA Combima, Ano :1993

Fabricante: IMA , Tipo: doppelseitiges Schwabbeln, Ano: 1993, FREETEXT1: aus IMA Combima, FREETEXT2: 4 Fach Polierbürste, FREETEXT3: ca. 0,5 kw, FREETEXT4: Bestückung scotch-Sisal, Ano :1993

Fabricante: Perske, Ano: ca 1993, Tipo: Umformer, aus Maschine: IMA Combima, KVA: 15, Ano :ca 1993

Description: Serial Number: 22319 Working area:  , X = 6000 mm Y = 1200 mm , Vertical boring spindles: , in X:16 , in Y:11 Horizontal boring spindles: , in X: 2 in Y:1 NUM control, IMAWOP Softawre on windows Installed power: 17kw Vacum pump included , serial number: 22,319, Approx. Onsite Dimension. (l x w x h): 10,000 x 4,680 x 2,600 mm, weight approx.: 6,000 kg

Description: Max. edge thickness 30 mm Max. forward feed speed 20 m/min Pressure with rubber belt Panel support guides , with positioning by NC , NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit Constructor model : 08.376 automatic timed intervention , motor power : 3 KW r.p.m. : 12000 RPM Edge coil magazine glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 9 with positioning by NC , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.85 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 1 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 with positioning by NC , motor  ...

Description: Max. panel height 60 mm Min. panel length 130 mm Min. panel width 65 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Pressure with rubber belt No. Panel Sizing / Milling units , Unit : pre-milling unit Constructor model : R3 L20 motor power : 4 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for PUR glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units 10 Processing Unit : end trimming Constructor model : 8,42/39/B no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 Processing Unit : Corner rounding Constructor model : 08.342 Processing Unit : edge scraping Processing Unit : belt sanding Constructor model : 08.62 Processing Unit : belt sanding Const ...

Description: Max. panel width 3300 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Conveyor Track with dogs , Pressure with rubber belt NO. PANEL SIZING / MILLING , Unit : scoring unit motor power : 4.4 KW r.p.m. : 6000 RPM NO. PANEL SIZING / MILLING , Unit : double chipper, top and bottom Constructor model : 75.30 NO. PANEL SIZING / MILLING , Unit : miller hogger NO. PANEL SIZING / MILLING , Unit : miller hogger Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units , Processing Unit : end trimming Constructor model : 08.412 no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 no. motors : 2 Processing Unit : Corner rounding Constructor model : ...

Description: - Edge banding machine - Serial number 02352 - Total installed power 21 KW - Edge thickness from 0.40 mm up to 12 mm - Workpiece thickness from 10 mm to 45 mm - Minimum workpiece length 150 mm - Feed motor 2.20 KW - Control system - IMA 08.376 joint trimming unit, 2 x motor 3 KW-12000 rpm - IMA 283.08 Gluing unit with pot for granulated hot melt adhesive - Pressure unit with (1+5) rollers - IMA 08.415 Cross-cut unit, 2 x motor 0.66 KW-11100 rpm, swivels up to 8° - IMA 08.0555 Rough trimming unit, 2 x motor 1.80 KW-12000 rpm (upper motor missing) - IMA 08.346 Profile trimming unit, 2 x motor 0.50 KW-18000 rpm - IMA 08.519 Profile scraper unit - Flat scraping unit - Milling unit, motor 2 KW-12000 rpm - IMA 08.612 Edge buffing unit, 2 x motor 0.25 KW-1320 rpm IMPORTANT: The return system shown in the photos is NOT included in the scope of delivery Approx. Onsite Dimension.  ...

Description: High-perfomance Edegbanding machine with PU-gluing and return conveying system. Worked only for approx. 1 year in single-shift workshop: infeed area with long infeed fence, 5-roller infeed unit and squared infeed table (500 x 500 mm) with controlled fence. Spraying unit for separating agent top/bottom. per-milling unit 2 x 4,5 kW ,incl. horizontal positioning controlled gluing unit with PUR-pre-melter BALTI Dual Pur. 2 times automatic glue-quantity dosing. 6-roll pressure zine, per-heating table pre-milling unit for premilling of edge projection on the top side snipping unit 2 x 600 W with automatic lateral scanning and pneumatic inclination 0 and 25° rough trimming unit 2 x 1,85 kW with HSK-25 retainer corner rounding unit KFA x30 - 0,5 kW mit HSK retainer multi profile scraping unit flat scraping unit buffing unit return conveying system Feddback 100 for ma ...

Description: • Edgebander with return system • Serial number 10347 • Edge thickness in strips up to 12 mm • Edge thickness in roll up to 3 mm • Worpiece thickness up to 40 mm • Adjustable feed speed from 5 m/min up to 25 m/min • Feed motor 5.50 KW • Joint trimming unit, 2 x motor 3 KW • Edge feeder for strips and roll, edge magazine for 6 edge coils • Gluing unit for PUR glue • Pressure group with (1+5) rollers • End trimming unit, 2 x motor • Rough trimming unit, 2 x motor 1 KW • Profile trimming unit, 4 x motor • Profile scraping unit • Flat scraping unit • Edge buffing unit • Milling group • Return system with inclined air table and dimensions 2020 x 1000 mm, motorized belt conveyor with useful dimensions 9000 x 1200 mm, inclined roller conveyor with dimensions 2500 x 1200 mm Approx. Onsite Dimension. (l x w x h): 12,275 x 3,800 x 2,570 mm, weight ...

Description: IMA ADVANTAGE 4612 Edgebander Motor data: 380 V - 50 Hz - 15 Kw - 37 A Suction nozzle: 120 mm Pre-wired for Pre-milling Unit Space Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 45 mm Edge material height: 14 - 55 mm End trimming unit Rough Milling unit MFA Milling Unit (Fine Milling + Corner Rounding) Profile Scraper + Flat Scraper + Buffing unit Feed approx.: 12 m/min Compressed air approx.: 7 bar serial number: 02305, edge thickness: 0,4 - 12 mm, workpiece thickness: 50 mm, feed: 12 m/min, control: IMA 1101, Approx. Onsite Dimension. (l x w x h): 6,100 x 1,800 x 2,000 mm, weight approx.: 3,100 kg

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -electrically heated -7x heating rods a 800 WATT -reconditioned by FavFE-MA-TECH -2x glue basins available -Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

size of incoming product: 32 x 122 x 164mm final product size: 130 x 170 x 208mm speed : 25cpm These machines are brand new and have been used for 8 months in two shifts of 5 days a week.

largura 3200 mm Alimentação do painel por correntes, largura da corrente 80 mm Velocidade de alimentação máxima? m/min, 4 kW Cães a cada 11 cm. Equipamento: 1+1 Jump scorer 1+1 Hogger 1+1 Jump shaper 1+1 Jump shaper 1+1 Jump shaper 1+1 Jump shaper