usava KELLER para venda

Adega SMM 012.0 Sopradores de extração Diâmetro 120/120mm Caudal de ar 700 Nm³/h 0,55kW

Keller SMM 016,0 Sopradores de extração Diâmetro 160/160mm Caudal de ar 1200 Nm³/h 1,5 kW

Adega Sopradores de extração 1,8 kW

Fluxo de volume 2.000 - 3.000 m³/h Nível de pressão sonora < 75 dB L/W/H 1,4 m / 1,4 m / 2,0 m Peso 1,025 t Requisito de potência 7,5 kW

sheet width: 480 mm plate thickness: 3 mm stations: 13 total power requirement: kW weight of the machine ca.: 11 t dimensions of the machine ca.: 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it applies exclusively our business and conditions of sale. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: Vario T 1.0 L originates from LVD lasercutting machine power: 2,2 kW

Description: Machine number: 502485 Operating voltage: 400 V Frequency: 50 Hz Connection: 5.5 kW Approx. Onsite Dimension. (l x w x h): 1,400 x 1,200 x 2,000 mm, weight approx.: 500 kg

Single screw degassing extruder CFE-699-A-04 for polymers manufactured by KELLER (USA) and KOBE STEEL (Japan) under a DUPONT license. The extruder has the following parameters: Overall dimensions of the extruder, taking into account the gearbox and motor - length 12 meters, width -2.5 meters, height -1.5 meters, the total diameter of the casing with a heating-cooling jacket is 950 mm, the diameter of the screw is 600 mm, screw length -7800 mm. The average screw speed is 22-25 rpm. The total weight of the extruder without spare parts is 40 tons. The working pressure in the casing is up to 300 bar, the working temperature of heating the melt is up to 300 degrees. The casing of the extruder is heated by high temperature oil supplied to it. The average productivity of polymers is 50-100 tons per hour. The extruder is equipped with a parallel reducer of POWER-TECH INTERNATIONAL (FOOT-JONES)  ...

Two-roll corrugating machine - crimper, for the production of polyester staple fibers, manufactured by KELLER (USA) by order of KOBE STEEL (Japan). The width of the work rolls is 150 mm. It is equipped with a clamping pneumatic cylinder and a drive gearbox manufactured by SEISA REDUCTION GEARS with a capacity of 150 kW. Productivity is up to 50 tons / hour. Made of AISI 304 stainless steel. 4 pieces are available. The equipment was practically not used - an operating time of about 60 hours.

Dados técnicosSessas velocidades: 1800 rpmAspirado ar: 20 m3/minVoltage 50 Hz 3x: 400 VoltDriving motor (potência do motor): 1,1 kWPower : 2,7 AWeight : 100 kgDimensiondimensionais : Comprimento: 800 mmWidth : 550 mmHeight : 1100 mm

Capacidade (x): 0 Process App: 0 Other Info: 0 Tecnical data Spindle speeds: 2850 rpm Aspirated air: 1000 m3/h Voltage 50 Hz 3x: 400 Volt Driving motor (potência do motor): 1,5 kW Dimensional: Length: 1200 mm Width: 800 mm Height: 2300 mm

Capacidade (x): 0 Process Application: 0 Other Info: 0 Desesetecnicos Voltage 50 Hz 3x: 400 Volt Instalação instalada: 0,55 kW Pese: 60 kg Dimensional: Length: 650 mm Width: 500 mm Height: 1100 mm