A MÁQUINA PODE SER VISUALIZADA NO LOCAL D- 99868 GOTHA POR MARCAÇÃO. Especificações: - largura máxima de trabalho 4050 mm - capacidade máxima de corte St 40 4 mm - Hidr. Ajuste do ângulo de corte - Número de cursos, dependendo do ângulo de corte e comprimento de corte aprox. 20 - 25 pró/min - Calibre traseiro do motor 10 - 1000 mm - Ajuste do comprimento de corte - Fixações hidráulicas - Ângulo de paragem frontal - braços de apoio dianteiros - Proteção do espaço traseiro - Conexão pneumática 6 bar - Acionamento 400 V / 9 kW - Interruptor de pé - Necessidade de espaço sem braços de apoio aprox. L 4450 x A 1900 x P 2100 mm - Peso aprox. 9000 quilogramas
Pressione a prensa de banco de borda da borda da borda do travão do travão usada Fabricante: Mengele Tipo: C320-4B Construído: 1966 última revisão e reparação: 2000 Localização D-01587 Riesa Dimensões WxH: 6.250 x 3.650 mm Largura da faca de borda: 6.150 mm espessura da chapa a 6.000 mm de comprimento de flexão: aproximadamente 7,5 mm. As máquinas são projetadas para curvas de eixos muito profundas, portanto, recantos de bochechas muito profundas. Força de prensagem original 300 t - Em 1989 a força de prensagem foi aumentada para 350 t. A imprensa está em muito bom estado, apesar da sua idade. A máquina está desmontada e pronta para ser carregada. documentação para a máquina está disponível. Peso: cerca de 45 t
Travão de pressão hidráulica Fabricante: MENGELE Tipo: A 100-2 Pressão de pressão: 100t Curso: 160mm electr. Ligação: 400V 3Ph Ano de construção: 1964 Condição: usada e funcional
pressure: 80 t chamfer lenght: 2550 mm distance between columns: 2050 mm Control: keine stroke: 250 mm light barrier: SICK The machine was previously equipped with a CNC control, now converted to electrically manual operation. Digital display for backgauge. electrical stroke adjustment Machine is functional and has been used sporadically for the past 15 years, as previous owner preferred to use a folding machine. tools included: 1 set of upper tool 1 lower tool (die block) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t chamfer lenght: 125 mm distance between columns: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t chamfer lenght: 4000 mm distance between columns: 3060 mm control: FORTRON CNC 10 H 4 throat: 280 mm stroke: 250 mm dayligth: 500 mm table length: 4050 mm table width: 280 mm feed down: 70 mm/sec feed up: 68,4 mm/sec working feed: 9 / 3,5 mm/sec operating pressure: max. 205 bar oil volume: 400 l total power requirement: 19,5 kW weight of the machine ca.: 20,8 t Total weight including accessories: 22 t dimensions of machine L x W x H: 4,8 x 1,88 x 2,93 m dimensions of switch cabinet: 1,6 x 0,5 x 2,25 m Acc.: programmable back gauge, upper and lower dies, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 175 t chamfer lenght: 3550 mm stroke: max. 410 mm Control: Cybelec Modea 10 S height of the machine: 3200 mm weight: 14.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Largura da chapa: 3050 mmplate espessura: 25 mmdistância entre colunas: requisito de potência mmtotal : kW peso da máquina ca.: tdimensions da máquina ca.: m
Hydraulic cylinder, support cylinder, hydraulic stamp, pressure stamp -Spare part: hydraulic cylinder from Mengele press brake -Equipment: with thread stop for depth limitation -Piston diameter: approx. 240 mm -Piston rod: Ø 200 mm -Stroke: approx. 380 mm -Piston rod holder: 212 x 212 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 840/410/H355 mm -Weight: 430 kg/piece