usava NILES para venda

Lathe paralelo NILES DLZ 400 IV Entre pontos: 1000 mm Maxi Ø no banco: 420 mm Maxi Ø sobre sela: 225 mm Diâmetro do eixo: Ø 52 mm Velocidade do fuso: de 45 a 2240 RPM Chuck 3 mandíbulas Ø 250 mm (mandíbulas intercambiáveis) Roscas: Métrica + Whitworth Tailstock: CM5 Rápido em X Bomba lubrificante Tensão: 380 V Comprimento: 3000 mm Profundidade: 1500 mm Altura total: 1600 mm Peso: aprox.

Torno do motor NILES DP1/S3 Ano de fabrico: 1988 Fabricante: NILES Fabricado na Alemanha A máquina quase não é usada, completa Dados técnicos: Altura do centro sobre a cama: 800mm Diâmetro máximo de processamento sobre a cama: 1.600mm Diâmetro máximo de processamento sobre o suporte: 1.250mm Diâmetro mínimo da peça: 250mm Peso máximo da peça: 40.000kg Diâmetro máximo da peça: 1.250mm Cone interno do eixo (1:10): 120mm Gama de alimentações de suporte longitudinais: - 1ª linha (ajuste contínuo): 1-200mm/min - 2ª linha (ajuste contínuo): 36-3600mm/min Gama de feeds de lâminas transversais: - 1ª linha (ajuste contínuo): 0,4-80mm/min - 2ª fila (ajuste contínuo): 14,4-1440mm/min Gama de feeds de slides cruzados: -1ª fila (ajuste contínuo): 0,12-25mm/min - 2ª fila (ajuste contínuo): 4,5-450mm/min Duração da viagem: -De lâminas trans ...

Torno Vertical WMW NILES DMF 6300 Estado: Muito bom, completo Detalhes técnicos: Diâmetro de giro: 6300 mm Diâmetro de giro, com suporte lateral: 6000 mm Graus de deslocamento dos suportes do vértice: +/-30 Deslocamento do suporte lateral: 1800 mm Altura máxima da peça: 2500 mm Peso máximo da peça: 50000 kg Diâmetro do manco: 5300 mm Faixa de velocidade: 0.35-14 rpm Velocidades de alimentação (16): 0,063-11,2 mm/omw. Velocidade rápida dos suportes: 1000 mm/min ¬ ¹ Velocidade rápida do suporte lateral: 500 mm/min ¬ ¹ Potência de ligação: 120 kW Dimensões da máquina W: 14,40 x 8,20 x 8,70 m Peso da máquina ca.: 174.000 kg

DIÂMETRO MÁXIMO 800,MÓDULO MAX 14

MARCA: NILES ANO: 1988 MODELO: DFS2-2 TIPO DE APLICAÇÃO: TORNEAMENTO LOCALIZAÇÃO: ALEMANHA TIPO DE MÁQUINA: TORNO DISPONIBILIDADE: IMEDIATAMENTE Informação Técnica UNIDADE DE CONTROLO MARCA: FAGOR UNIDADE PRINCIPAL FAIXA DE VELOCIDADE DO EIXO: 4000 1/MIN Informação Adicional BENEFÍCIOS DA MÁQUINA BENEFÍCIOS TÉCNICOS DA MÁQUINA: - PORTA-FERRAMENTAS 12 VEZES - GUIAS ENDURECIDAS - ACESSÓRIOS STANDARD - CATÁLOGO UP - FILTRO DE AR PARA MOTOR DC - EQUIPAMENTO ADICIONAL DE ACORDO COM B1. 2/3 - CORRENTE TRIFÁSICA - TENSÃO DE FUNCIONAMENTO 380 VOLTS - FREQUÊNCIA 50 HZ - CC

turning diameter: 315 mm turning length: 1000 mm control: Siemens type: Sinumerik 802 D turning diameter over slide: 160 mm spindle hollow: 52 mm Tool changer: 12 turning speeds: 30-3300 U/min chip conveyor: total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 800 mm turning length: 4500 mm control: Siemens workpiece weight: 4000 kg Revolutions milling spindle: 1-5500 U/min milling spindle: HSk 100 type: 840 D positioning accuracy: 0,01 ° Torque: 3000 Nm transmission ratio: 2 turning speeds: 2430 U/min main drive: 77 kW steady: SMW Diameter: 140-510 mm coolant capacity: 980 l coolant pump: 80 Bar paper filter: 3-jaw-chuck diameter: 610 mm tail stock: Tool changer: swing diameter: 1100 mm total power requirement: kW weight of the machine ca.: 52 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2000 mm gear width: . mm max. module: 22 max. hob diameter: 250 mm hob turning speeds: 16-92 U/min total power requirement: 13 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-jaw-chuck diameter: 630 mm turning diameter over slide rest: 650 mm turning length: 500 mm turning dia. in gap: 1420 mm digital readout: Mitutoyo turning speeds: 3,55-710 U/min total power requirement: 24 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 850 mm turning length: 6100 mm control: Siemens type: 840 D turning diameter over slide: 570 mm Tool changer: 12 Pos turning speeds: U/min chip conveyor: 3-jaw-chuck diameter: 600 mm total power requirement: kW weight of the machine ca.: 17 t dimensions of the machine ca.: 12x2x2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 4000 mm turning diameter over slide rest: . mm turning length: 5000 mm total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1650 mm turning diameter over slide rest: 1200 mm turning length: 7500 mm turning dia. in gap: 2500 mm spindle diameter: 105 mm speed: 3,55 - 180 (x24) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Comprimento da tabela: - largura mm: - mm respeso da roda: 400 mm max. largura da roda de moagem: 50 mm tal: 1,5 kW pelho da máquina ca.: 0,3 t dimensionals da máquina ca.: 1 x 1 x 1 m For Pré-Vestir as Rodas moedoras de moagem de engrenagens para além da máquina, particularmente para o perfil se rodas de corte para duas moções de flanco, módulo 12

diâmetro de viragem sobre o leito: 1650 mm ver diâmetro sobre o descanso do escorregador: 1200 mm verso de viragem: 7500 mm turou o dia. em intervalo: 2500 mm spindle diâmetro: 105 mm spe: 3,55 - 180 (x24) U/min voltage: 380 V total power requirement: 45 kW peso da máquina ca.: t esdimensionais da máquina ca.: m

control: Numeriksteuerung CNC 700 K total power requirement:28 KVA weight of the machine ca.:7,8 t dimensions of the machine ca.:6610 x 2280 x 2235 mm work height max.:1060 mm greates pass round over bed:305 mm spindle bore:82 mm Documents:vorhanden

weight of the machine ca.:3 t

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 8 mm -Price: per piece -Number: 10x available -Weight: 0.9 kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 6 mm -Price: per piece -Number: 40x available -Weight: 0.6 kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 8 mm -Price: per piece -Number: 50x available -Weight: 0.9 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 50 mm -Outer: Ø 200 mm -Width: 40 mm -Price: per piece -Number: 14x available -Weight: 2.1 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 40 mm -Number: 7x discs available -Price: per piece -Weight: 1.9 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 40 mm -Price: per piece -Number: 8x available -Weight: 2.2 kg

Grinding wheel, cup wheel, bench grinder, surface grinder, cylindrical grinder -Manufacturer: Niles, grinding wheel 20 Jot - Inside: Ø 32 mm -Outside: Ø 200 mm -Width: 20 mm -Weight: 1.3 kg

Grinding wheel, cup wheel, bench grinder, surface grinder, cylindrical grinder -Manufacturer: Niles, grinding wheel - Inside: Ø 32 mm -Outside: Ø 200 mm -Width: 20 mm -Number: 2x discs available -Price per piece -Weight: 1.4 kg/pc.

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 6 mm -Number: 2x discs available -Price: per piece -Minimum purchase: complete -Weight: 0.6 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 6 mm -Number: 9x discs available -Price: per piece -Weight: 0.4 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 32 mm -Number: 1x discs available -Price: per piece -Weight: 3 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 19 mm -Number: 1x discs available -Price: per piece -Weight: 1.2 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 32 mm -Number: 1x discs available -Price: per piece -Weight: 2.1 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 20 mm -Number: 1x discs available -Price: per piece -Weight: 1.3 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 25 mm -Number: 3x discs available -Price: per piece -Weight: 1.9 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 30 mm -Number: 9x discs available -Price: per piece -Weight: 1.8 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 30 mm -Number: 6x discs available -Price: per piece -Weight: 1.8 kg

Niles brand german mali borverk bench x : 1600 mm y : 1600 mm z : 1800 mm Turntable works flawlessly. gear sets bronze nut all maintenance is done. It has an opening mirror. counter bed is available. The opposite bed was sandblasted and painted for cleaning. it is well maintained. There is no non-working place in the electrical unit. the machine is about 20 tons 11 tons of material was processed on the table before. By producing the apparatus, it can be processed with a chuck that opens pipes up to q 1800 mm diameter. gasket surface can be opened to flanges.

NILES lathe turning diameter approx. 700 mm turning length 1000 mm including new measurement. The machine is in good technical condition, it is possible to test it by agreement.

Manufacturer Niles Model ZSTZ 1250 Year 1986 Maximum wheel diameter : 1250 mm Module + : 30

Turning diameter: 1300 mm Turning length: 4500 mm Turret positions: 1 Positions ATC: 142   Number controlled axis: 7   CNC Brand: Siemens CNC Model: 840D NILES SIMMONS N50/2 MC  TURN MILL DRILL MACHINING Make            : NILES SIMMONS Germany Typ            &nbs p; : N 50 / 2 MC x 4500 Age            &nbs p; : 2008   Swing over slide              : 1.250 Swing over bed               : 1.300 DBC turning length          : 4.500 Spindle bore     &nb ...