usava OMMA para venda

Código: 0260 Marca: OMMA Modelo: FTF 1400/2M - CE Standard Espalhador automático de cola de 4 rolos para painéis de madeira, laminados, painéis técnicos, espuma, insonorização, gesso cartonado, portas etc. - Norma CE Dados técnicos: Quadro rígido e sólido Largura de trabalho mm 1360 Espessura máxima de trabalho mm 80 Altura da mesa de trabalho mm 905 Diâmetro dos rolos de revestimento de borracha mm 250 Diâmetro dos rolos doseadores cromados mm 185 Potência instalada Kw 1,1 Rolos doseadores chapeados a crómio. Estes rolos podem ser facilmente arrefecidos com o dispositivo de arrefecimento inchCRIOinch Velocidade de trabalho variável eletrónica com visor Mostrador analógico da distância entre os rolos de espalhamento com precisão de leitura de 1/10 mm Alta uniformidade do espalhamento em largura total de trabalho Ejetor de disco rotativo motorizad ...

Glue application machine Brand: OMMA Type: FSC 600 New machine Technical details: Useful working width mm 600 Maximum working thickness mm 90 Working speed mt/min 19 Height of working level mm 905 Spreading rollers Ø mm 185 Standard grooving lines/inch 14 Installed power kW 0.37 Colour Ral 7035 Command side (compared to working direction) Right Standard voltage v 400/50/3 Technical equipment: - Spreading rubber rollers coated with grinded surface. - Thickness graduate indicator. - Top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation. - Parallelism regulation between spreading rollers. - Rollers protection with security plate and foot control in front of the machine that stop immediately the machine if activate. - Security front foot barrier. - Steel zinc collecting tank of the cleaning water. - E ...

Glue application machine Make: OMMA Type: FSC-1.300 for water-based glues working width: 1.260 mm maximum working thickness: 90 mm working speed: 19 m/min. height of working level: 905 mm application rolls Ø: 185 mm standard grooving lines: 14 inch installed power: 0,5 kW colour: RAL 7035 command side (compared to working direction) right standard voltage: 400 V/50 cycles /3 ph. technical equipment: - rubbered application rolls, coated with grinded surface - thickness graduate indicator - top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation - parallelism regulation between application rollers - rollers protection with security plate and foot control in front of the machine that stops immediately the machine if activate - security front foot barrier - steel zinc collecting tank of the cleaning water - electr ...

Glue spreader with 4 roller Brand: Omma Type: GS Technical data: Working width: 1.360 mm Max throughfeed height 80 mm Speed: 16,5 m/min. Working height: 905 mm Diameter of application rolls: 200 mm Diameter of metering rolls: 185 mm Connected value 1,3 kW Colour RAL 7035 Operation side left Electric 400/50/3 Technical equipment: - Each 1 drive motor for the upper and lower spreading unit for highest precision and to get a low-noise vibrational free run. - Rubber coated application roller with sanded surface - Hard rubber coated dosing rollers with sanded surface - Display for height adjustment of application rollers, precision: 1/10 mm - Manual adjustment of dosing rollers depends on the application rollers for an even glue application - Special tighted bearing to prevent sluggishness, blockages and overheating. - Safety grid as a safety device at machi ...

doubel side brushing unit Brand: OMMA Type:SPX_1400 New machine with transversal cleaning system Technical data: Useful working width about mm 1.350 Maximum working thickness mm 150 Adjustable speed mt/min 5~25 Working level (adj. +/- 20mm) mm 905 Brush rotation speed about mt/min 92 Suction connections Ø mm 120 Installed power about kW 1,2 Color Ral 7035 Command side (in front machine, looking at the entrance) Right Standard voltage v 400/50/3 Technical equipment: - Top & bottom transversal cleaning system by means of motorized belts with special nylon brushes. - Adjustable system to compensate the natural lengthening of the brushes, increasing the lifetime. - Mechanical devices through the brushes to remove dust allowing the best elimination/aspiration. - Special cleaning system for the finest particles, with adjustable atomizers and separate tank for specif ...

High precision protective film laminating machine Brand: Omma Type: PRO-J14_TF New machine Single machine (not integrated in a line) Workpiece dimensions: min. width 130 mm max. width 560 mm min. length 300 mm max. length 2.250 mm min. thickness 19 mm max. thickness 25 mm For application of self-adhesive film on the top of painted surfaces. Laminating rollers Ø 150 mm Working width 1.300 mm Max. workpiece thickness 80 mm Speed adjustable 5/25 m/min Working height (adjustable +/- 20mm) 905 mm Connected load kW 0.75 Integrated insertion/exit rollers Length (approx.) 300 mm Color RAL 7021 + RAL 2004 Operator side (in front of the machine, towards the entrance) right side Standard voltage v 400/50/3+N+T Max. Outer diameter of roller Ø 300 mm Inner diameter of roller Ø 76 mm Technical equipment: - High precision automatic cross cutting foil cutting  ...

Description: Working width: 1800 mm Material thickness: max. 80 mm Top side film application Anti-adhesive rubber laminating rollers Top supply shaft with adjustable brake Manual thickness adjustment Variable speed Digital display STS driven Roller Conveyor Approx. Onsite Dimension. (l x w x h): 3,000 x 2,000 x 2,000 mm, weight approx.: 2,000 kg