usava SANDRETTO para venda

Marca do injetor: Sandretto, Modelo: 1300/230. 230 TN. Ano: 2002

Máquina de moldagem de injeção SANDRETTO MEGA T 4435/610 (1998) Máquina de injeção termoplástico de 610 toneladas Em condições de trabalho. Euromap 4435/610 Diâmetro do parafuso: 21 Volume de injeção calculado: 2831cm3 Comprimento do parafuso (LD): 21 Capacidade máxima de injeção: 746 cm3/1" Capacidade de laminação: 86 g/1" Pressão sobre o material: 1548 bar Força de fecho: 610 toneladas. Binário variável do motor de deslocação: 5570 Nm. Velocidade do parafuso: 153 RPM Parafuso de potência hidráulica: 120 CV Curso de grupo de injeção: 725 mm. Zonas de aquecimento: 4+bocal. Potência total de aquecimento: 38 kW. Força de bloqueio de molde: 5985 kN Espessura do molde min/máx.: 300/1000 mm. Curso de avião móvel: 930 mm. Dimensões da placa: 1270 x 1270 mm. Passagem da coluna: 850 x 850 mm. Diâmetro da coluna: 160 mm. Força de extraç ...

B&A REF: 9009 TONELADA: 220 PESO DO TIRO: 575G DIÂMETRO DO PARAFUSO: 55MM VOLUME DO CURSO: 529CM3 PRESSÃO DE INJEÇÃO: 1550BAR TAMANHOS DE PLACATE: 860 X 860MM DBTB: 585 X 585MM ALTURA MÍNIMA DO MOLDE: 210MM ALTURA MÁXIMA DO MOLDE: 630MM CURSO DE ABERTURA DO MOLDE: 580MM MAX LUZ DO DIA: 1210MM CURSO DO EJETOR: 230MM CONTROLOS: SEF 2000 VÁLVULAS DE AR: 1 TRAÇÃO DO NÚCLEO: 1 ACIONAMENTO POR PARAFUSO: HIDRÁULICO

REF: 8692

Referência: 8838

B&A REF: 8986 TONELADA: 700 PESO DO TIRO: 5618G DIÂMETRO DO PARAFUSO: 120MM VOLUME DO CURSO: 6107CM3 PRESSÃO DE INJEÇÃO: 1500AR TAMANHOS DE PLACANE: 1560 X 1560MM DBTB: 1060 X 1060MM ALTURA MÍNIMA DO MOLDE: 350MM ALTURA MÁXIMA DO MOLDE: 1100MM CURSO DE ABERTURA DO MOLDE: 1150MM MAX LUZ DO DIA: 2250MM CURSO DO EJETOR: 350MM CONTROLOS: SEF 2000 VÁLVULAS DE AR: 4 TRAÇÃO DO NÚCLEO: 2 ACIONAMENTO POR PARAFUSO: HIDRÁULICO

B&A REF: 8983 TONELADA: 380 PESO DO TIRO: 1310G DIÂMETRO DO PARAFUSO: 75MM VOLUME DO CURSO: 1370CM3 PRESSÃO DE INJEÇÃO: 1550AR TAMANHOS DE PLACANE: 980 X 980MM DBTB: 650 X 650MM ALTURA MÍNIMA DO MOLDE: 200MM ALTURA MÁXIMA DO MOLDE: 730MM CURSO DE ABERTURA DO MOLDE: 710MM MAX LUZ DO DIA: 1140MM CURSO DO EJETOR: 240MM CONTROLOS: SEF 100 VÁLVULAS DE AR: 1 TRAÇÃO DO NÚCLEO: 2 ACIONAMENTO POR PARAFUSO: HIDRÁULICO

B&A REF: 8985 TONELADA: 150 PESO DO TIRO: 370 DIÂMETRO DO PARAFUSO: 50MM VOLUME DO CURSO: 392CM3 PRESSÃO DE INJEÇÃO: 1560AR TAMANHOS DE PLACATE: 690 X 690MM DBTB: 460 X 460MM ALTURA MÍNIMA DO MOLDE: 155MM ALTURA MÁXIMA DO MOLDE: 560MM CURSO DE ABERTURA DO MOLDE: 500MM MAX LUZ DO DIA: 1060MM CURSO DO EJETOR: 160MM CONTROLOS: SEF 90 INTERFACE DO ROBÔ: EUROMAP 12

B&A REF: 8980 TONELADA: 200 PESO DO TIRO: 502G DIÂMETRO DO PARAFUSO: 55MM VOLUME DO CURSO: 546CM3 PRESSÃO DE INJEÇÃO: 1450AR TAMANHOS DE PLACANE: 770 X 770MM DBTB: 510 X 510MM ALTURA MÍNIMA DO MOLDE: 210MM ALTURA MÁXIMA DO MOLDE: 630MM CURSO DE ABERTURA DO MOLDE: 550MM MAX LUZ DO DIA: 1180MM CURSO DO EJETOR: 190MM CONTROLOS: SEF 100 TRAÇÃO DO NÚCLEO: 2 VÁLVULAS DE AR: 1 INTERFACE DO ROBÔ: EUROMAP 12 ACIONAMENTO POR PARAFUSO: HIDRÁULICO

MARCA: SANDRETTO ANO: 2010 MODELO: HES 3500 TIPO DE APLICAÇÃO: MOLDAGEM POR INJEÇÃO LOCALIZAÇÃO: PORTUGAL TIPO DE MÁQUINA: MÁQUINAS DE MOLDAGEM POR INJEÇÃO DISPONIBILIDADE: IMEDIATAMENTE ID GINDUMAC: PT-INJ-SAN-2010-00001

This SANDRETTO HES 3500 injection moulding machine was built in the year 2010.

Description: Serial number 93307538 Clamping force 350 Ton, 3500 kN , Distance between the tie bars (HxV) 530 x 530 mm , Mould size 200 x 650 mm Diameter 70 mm Shot volume, calculated injection 990 cm3 Material pressure 1.980 bar Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Min/max mold thickness: 200 - 650 mm Dimensions 8010 x 1400 x 2480 mm Weight 14500kg Approx. Onsite Dimension. (l x w x h): 8,010 x 1,400 x 2,480 mm, weight approx.: 14,500 kg

Injection molding machine SANDRETTO Serie otto sef 100 60T E192 Series otto sef 100 60T E192 Screw D35 / 131 cm3 / 1450 bar Between columns: 325 x 325 Aperture: 350 Mold thickness: min 90 / max 410 Dim trays: 500 x 500 Installed power: 25.25 kW Dimensions: 5.17 x 1.98 x 1.17 Weight: 4100 kg Euromap 12 robot interface Auxiliary cores blowgun Top dosage carpet control Socket table

Sandretto injection press series 7 135 tons sandretto series 7 135 ton Injection molding machine

Screw diameter: 50 mm Calculated injection volume: 475 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 193.2 cm³/s Pressure on the material: 1815 bars Plasticising capacity PS: 32.7 Kg/h Screw speed: 295 RPM Hydraulic motor torque: 1128 Nm Hydraulic motor power: HP Nb Temperature zones: 3 + 1 N CLOSING UNIT Closing force: 3000 kN Opening stroke: 630 mm Mini /Max Mold Thickness: 210-730 mm Max distance between tray: 30 mm Passage between columns: 570 x 570 mm Dimensions of the trays: 860 x 860 mm GENERAL Heating power: 30 kW Total installed power: 44.20 kW Oil quantity: 350 l.

Sandretto Series 350 Injection molding machine Ask for technical details.

This machine complies with CE standards but is not in working order (hydraulic problem / pump or angular translator / other). Sale in condition The offer includes dismantling, preparation for shipment and loading on truck on 26/09/2022. The machine is equipped with an injection unit, hydraulic core (without robot / manipulator). Type of material used: ABS/PC Closing force: 165 T Opening stroke: 525 mm Distance between columns: 525 x 525 mm Platen size: 760 x 760 mm Min/max mould height: 180/560 mm Injection moulding: Screw diameter: 43 mm Screw length: 20 D Injection volume: 319 cm3 Pressure: 2028 bar General: Motor power: 22 kW Total installed power: 31.9 kW Weight: 7.8 tonnes

SANDRETTO Micro 40T E injection molding machine SANDRETTO micro 40T E247 Version 2 GEFRAN Euromap 12 robot interface 4-way water box Socket table

Screw diameter: 70 mm Calculated injection volume: 1355 cm³ Length/diameter ratio: 20 L/D Pressure on the material: 1959 bars Plasticizing capacity PS: 57 Kg/h Screw Speed: 177 RPM Hydraulic motor torque: 3181 Nm Hydraulic motor power: HP Nb Temperature zones: 4 + 1 N CLOSING UNIT Closing force: 4850 kN Opening stroke: 830 mm Mini /Max Mold Thickness: 250-850 mm Max distance between tray: mm Passage between columns: 740 x 740 mm Dimensions of the trays: 1120 x 1120 mm GENERAL Heating power: 45 kW Total installed power: 68.2 kW

Closing force: 3000 kN Opening stroke: mm Mini /Max Mold Thickness: 230/730 mm Max distance between tray: mm Passage between columns: 665 x 665 mm Dimensions of the trays: 980 x 980 mm

SANDRETTO series 8 430/150 with SEF 100 Clamping force: 150 T Distance between columns: 460 x 460 mm Min / max mold thickness: 155 - 560 mm Opening stroke: 500 mm Tray dimensions: 690 x 690 mm Injectable volume: 286 cm3 Material pressure: 1500 bars Screw diameter: 45 mm total installed power 29 kW Weight: 7000 kg Dimensions: 6.36 x 2.08 x 1.50 m Euromap 12 robot interface core top dosage

SANDRETTO series 8 790-200 SEF100 Clamping force: 200 T Distance between columns: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Tray dimensions 770 x 770 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000 kg Dimensions: 7.26 x 2.30 x 1.58 m

SANDRETTO series 8 790-200 SEF 90 Clamping force: 200 T Distance between tie rods: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000kg Dimensions: 7.26 x 2.30 x 1.58 m Euromap 12 robot interface (CHAVERIAT A.111.24.PM - CH 2002 from 07/1998 as an option possible)

SANDRETTO serie 8 612/150 with SEF 90 Clamping force : 150 T Distance between tie bar : 460 x 460 mm Mould thickness min / max : 155 - 560 mm Opening strocke : 500 mm Injectable volume : 392 cm3 Pressure on material : 1560 bars Screw diameter : 50 mm Weight : 7000 kg Dimensions : 6,36 x 2,08 x 1,50 m

SANDRETTO series 8 1334/330 Clamping force: 330 T - 3300 KN Distance between tie rods: 650 x 650 mm Tray dimension: 980 x 980 mm Min / max mold thickness: 200 - 730 mm Opening stroke: 550 mm Injectable volume: 863 cm3 Material pressure: 1550 bars Screw diameter: 65 mm Heating power: 37 KW Total machine power: 57 KW L/D ratio: 21 Weight: 15,700 kg Dimensions: 7.85 x 2.36 x 1.85 m Euromap 12 robot interface aus core top dosage

SANDRETTO series 7 1960/350 Clamping force: 350 T - 3500 KN Distance between columns: 600 x 600 mm Dimensions of the trays: 910 x 910 mm Minimum/maxi thickness of the mold: 200 - 650 mm Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Weight: 14,500 kg Mounted mixing screw + std screw + one-piece screw

SANDRETTO Serie 8 sef 100 injection molding machine otto 200T E612 Sef 100 series Screw D50 / 392 cm3 / 1560 bar Between columns: 510 x 510 Opening: 550 Mold thickness: min 210 / max 630 Dim trays: 770 x 770 Installed power: 34.8 kW Dimensions: 6.36 x 2.14 x 1.84 Weight: 8800 kg Euromap 12 robot interface Auxiliary cores Top dosage

The press is currently decommissioned, and is equipped with an inverter for which it has energy consumption reduced to 50% It is equipped with a pneumatic solenoid valve. The cylinder is Bimetal replaced new for 3 years (polystyrene has always worked)

SANDRETTO serie 9 1300/3200 Clamping force : 320 T - 3200 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thickness min / max : 200 - 730 mm
 Opening strocke : 710 mm 
Injectable volume : 658 cm3
 Pressure on material : 1985 bars
 Screw diameter : 55 mm Total power of the machine : 53,7 KW Rapport L/D : 20
 Weight : 14350 kg
 Dimensions : 7,54 x 2,31 x 1,91 m

SANDRETTO series 7 177/60 Clamping force: 60 T - 600 KN Distance between columns: 301 X 301 mm Tray dimensions: 455 X 455 mm Min/max mold thickness: 80-350 mm Volume injected: 125 cm3 Material pressure: 1408 bar Screw diameter: 40 mm Heating power: 6KW Weight: 2900 kg

SANDRETTO Serie NOVE 2200/860 from 2003 Injection unit: 860 Screw diameter: 50 mm Screw length L / D: 20 Theoretical injectable volume: 475 cm³ Maximum injection pressure: 1815 bars Maximum injection flow: 193.2 cm³ / s Maximum screw rotation speed: 295 min-1 Closure unit Closing force: 2200 kN Mini / Max mold thickness: 210 - 630 mm Opening stroke: 550 mm Passage between columns: 510 x 510 mm Platen size: 770 x 770 mm General Pump motor power: 30 kW Heat output: 14.2 kW Total installed power: 44.2 kW Quantity of oil: 350 l. Dimensions (Length x Width x Height): 6.135 x 1.65 x 2.08 m. Weight: 8100 Kg

SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie rods: 510 X 510 mm Tray dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Material pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage Weight: 8100 kg Dimensions: 6.13 x 2.08 x 1.59 m

SANDRETTO serie 9 1300/3000 Clamping force : 300 T - 3000 KN
 Distance between tie bar : 570 X 570 mm Platen dimension : 860 X 860 mm 
Mould thickness min / max : 210 - 730 mm
 Opening strocke : 630 mm 
Injectable volume : 658 cm3
 Pressure on material : 1985 bars
 Screw diameter : 55 mm Total power of the machine : 53,7 KW Rapport L/D : 20
 Weight : 11 000 kg
 Dimensions : 7,04 x 2,22 x 1,82 m

SANDRETTO serie 9 1780/3950 Clamping force : 395 T - 3950 KN
 Distance between tie bar : 650 x 650 mm Platen dimension : 980 x 980 mm 
Mould thickness min / max : 200 - 730 mm
 Opening strocke : 710 mm 
Injectable volume : 960 cm3
 Pressure on material : 1852 bars
 Screw diameter : 63 mm Total power of the machine : 66,8 KW Rapport L/D : 20
 Weight : 15 000 kg
 Dimensions : 7,80 x 2,31 x 1,93 m Additional option on this machine : Sequential injection

SANDRETTO 9 series 2650/4850 Clamping force: 485 T - 4850 KN Distance between columns: 740 x 740 mm Platform dimensions: 1120 x 1120 mm Min / max mold thickness: 250 - 850 mm Opening stroke: 830 mm Injection volume: 1768 cm3 Material pressure: 1500 bars Screw diameter: 80 mm - 4 hydraulic cores - 1 blow gun - 2 8-way water boxes - Socket panel (4 three-phase, 1 neutral, 1 earth at the rear + 1 three-phase, 1 neutral and 1 earth at the front) Total power of the machine: 85 KW L/D ratio: 20 Weight: 21,500 kg Dimensions: 8.71 x 2.65 x 2.14m

SANDRETTO Serie Nove S sef 2000 220T E860 injection molding machine Series new S sef 2000 220T E860 Screw D50 / 475 cm3 / 1815 bar Between columns: 510 x 510 Opening: 550 Mold thickness: min 210 / max 630 Dim trays: 770 x 770 Total installed power: 44.2 kW Dimensions: Weight: 8100 kg Euromap 12 robot interface Auxiliary cores Top dosage socket table 4-way water box

SANDRETTO series 8 612/95 Clamping force: 95 T Distance between tie rods: 370 x 370 mm Dim trays 560 x 560 Min / max mold thickness: 100 - 460 mm Opening stroke: 410 mm Injectable volume: 392 cm3 Material pressure: 1560 bars Screw diameter: 50 mm total installed power 34.8 kW Weight: 5700 kg Euromap 12 robot interface 2 aux cores (PF and PM) 3 socket table With magnetic plate (TECNOMAGNETE 2009) top dosage

Manufacturer : Sandretto Model: 300T 860 NOVE S Year of manufacture: 2004 Screw diameter: 50 mm Calculated injection volume: 475 cm³ Length/diameter ratio: 20 L/D Maximum injection rate: 193.2 cm³/s Pressure on the material: 1815 bars Plasticising capacity PS: 32.7 Kg/h Screw Speed: 295 RPM Hydraulic motor torque: 1128 Nm Temperature zones: 3 + 1 N Closing force: 3000 kN Opening stroke: 630 mm Mini /Max Mold Thickness: 210-730 mm Max distance between tray: 30 mm Passage between columns: 570 x 570 mm Dimensions of the trays: 860 x 860 mm Heating power: 30 kW Total installed power: 44.20 kW Oil quantity: 350 l.

SANDRETTO Serie nove T injection molding machine 300T E1300 Screw D63 / 863 cm3 / 1523 bar Between columns: 665 x 665 Aperture: 660 Mold thickness: min 230 / max 730 Dim trays: 980 x 980 Installed power: 55.5 kW Dimensions: 7055 x 2547 x 2160 Weight: 12900 kg Euromap 12 robot interface Auxiliary cores (PF and PM) Top dosage 2 socket boards 10-way stainless steel water box APEX robot

Description manual command keyboard Sandretto S9 from spare parts warehouse no disassembly