Sumitomo Demag IntElekt 50/370-80 / Máquina elétrica Ano construção: 2009 Unidade de injeção: Diâmetro do parafuso: 25 mm Peso da injeção: 39 g Pressão de pulverização: 1580 bar Volume de dosagem: 44 ccm Unidade de fixação: Força de fixação: 50 t Espaçamento entre barras de amarração: 370x370 mm Tamanho das placas de fixação: 520x570 mm Ejetor: elétrico Unidade de fixação: alavanca de alternância Controlo: NC5 - Ecrã táctil Equipamento adicional: Máquina elétrica: alta velocidade, economia de energia e muito silenciosa Euromapa 67 Interface do robô Válvula de ar x 4 Controle com corredores quentes Unidade de injeção endurecida - Bimetal Lubrificação central É possível alterar o diâmetro do parafuso Métricas: Peso: 4750 kg Comprimento/Largura/Altura: 4.20x1.26x1.84 m Conduzir: Capacidade de aquecimento: 5,7 kW ...
Máquina de moldagem de injeção Sumitomo Demag Systec multi 210/580-430h/200r 2021 Robô Wittmann W822 Z:2500/Y:1400/X:550 2021
Molde de injeção sumitomo Demag Systec Wittmann Robot Máquina de moldagem de injeção Sumitomo Demag Systec multi 210/580-430h/200r 2021 Robô Wittmann W822 Z:2500/Y:1400/X:550 2021
FORÇA DE FIXAÇÃO: 250TON TAMANHOS DE PLACATE: 930 X 930MM D.B.T.B: 630 X 630MM ALTURA MÍNIMA DO MOLDE: 330MM CURSO DE ABERTURA DO MOLDE: 670MM MAX LUZ DO DIA: 1380MM CURSO DO EJETOR: 200MM DIÂMETRO DO PARAFUSO: 50MM PRESSÃO DE INJEÇÃO: 3032BAR VOLUME DO CURSO: 530CM3 PESO DO TIRO (P/S): 482GR CONTROLOS: NC5 ACIONAMENTO DO PARAFUSO: ELÉTRICO CIRCUITO DE AR: 4
MARCA: SUMITOMO DEMAG ANO: 2019 MODELO: SYSTEC 1300 1500-9500 SERVO HORAS DE PRODUÇÃO: 17522 TIPO DE APLICAÇÃO: MOLDAGEM POR INJEÇÃO LOCALIZAÇÃO: ALEMANHA TIPO DE MÁQUINA: MÁQUINAS DE MOLDAGEM POR INJEÇÃO DISPONIBILIDADE: IMEDIATAMENTE
MARCA: SUMITOMO DEMAG ANO: 2010 MODELO: 1300-8000 TIPO DE APLICAÇÃO: MOLDAGEM POR INJEÇÃO LOCALIZAÇÃO: PORTUGAL TIPO DE MÁQUINA: MÁQUINAS DE MOLDAGEM POR INJEÇÃO DISPONIBILIDADE: IMEDIATAMENTE ID GINDUMAC: PT-INJ-SUM-2010-00001 Informação Técnica DADOS GERAIS LARGURA DAS MEDIDAS: 14400 MM PROFUNDIDADE DAS MEDIDAS: 3400 MM ALTURA DAS MEDIDAS: 2900 MM PESO DA MÁQUINA: 16400 KG UNIDADE DE INJEÇÃO DIÂMETRO DO PARAFUSO: 110 MM PESO DE TIRO: 3976 GRS VOLUME DO CURSO: 4370 CM³ PRESSÃO DE INJEÇÃO: 1815 BAR UNIDADE DE FIXAÇÃO FORÇA DE FIXAÇÃO: 13000 KN CURSO DE ABERTURA: 1500 MM ALTURA MÍNIMA DO MOLDE: 700 MM ALTURA MÁXIMA DO MOLDE: 1400 MM Equipamento Adicional - INCLUIR ROBÔ MASTER MATTIC RB400CN
Sumitomo Demag Systec SP 280/630-840 ano de fabrico 2014 280 Tonelada Pinça 2800kn Tie Bar Dist 630 Unidade de injeção 840 Fabricado em Schwaig, Alemanha 400v 50hz Exworks América do Sul
For sale are 3 Sumitomo Demag IntElect 150/520-410 injection molding machines in good technical condition, complete with hydraulic stations, Witmann Battenfeld W-721 robots (3 axes) and robot work area fences. Stored in a heated room. Unfortunately, there is no way to see the operating time, because... The injection molding machines are not connected to the power supply. Clamping unit 1500. Closing force 1500 kN, holding force 1650 kN, opening stroke max. 495 mm, built-in mold height min/max 275/585 mm, max. the distance between the plates for clamping the mold is 1080 mm, the plates for clamping the molds are 770x770 mm, the clearance between the columns is 520x520 mm, the weight of the mold is max. 1700 kg, which makes the weight of the mold on the movable clamping plate 1150 kg. Ejector. ejector stroke - 125 mm, ejection force 35 kN, ejector return force - 35 kN Injection unit 41 ...
SUMITOMO-DEMAG IntElect 210/580 Clamping force : 210 Tons Screw diameter : 35.0 mm Tie bar spacing (H) : 580.0 mm Tie bar spacing (V) : 580.0 mm Shot volume : 178.0 cm³ Shot weight : 158.0 g Pressure on material : 2800 bar Platen length : 880.0 mm Platen width : 850.0 mm Opening of the press : 1265.0 mm Mould size : 690 Length x width x height : 6260.0 mm à 1555.0 mm à 2071.0 mm Weight : 9800.0 kg Worked hours : 26615 hours Hours under power : 32244 hours State excellent At local norms : yes Status : under power max inj stroke -185 mm Operating hours â CPU-32143 ,Drives -26215 ,Heating -26500 Total cycle -16686388 Clamping Force 2100 KN Injection unit 500 Screw diameter 35 mm 400 V / 50 HZ Manufacture year âOctober 2010 Net Weight-9800 kg Injection and Clamp Drives renewed in 2015 The machine is in excellent condit ...
Machine: DEMAG 50 T INTELEC Year: 2007 Control type: NC4 Number of hours: 25000H Closing Closing force: 50 T Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini / maxi mold: 150/350 mm Max distance between plates: 410 mm Injection: Screw diameter: 30 mm cm3: 74 Bars: 1400 General: Motor power: 20 kw Heating power: 5 kw Injection weight: 3.3 tonnes Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES
Machine: DEMAG 650T System 650/1000 YEAR 2008 Year: 2008 Control type: NC4 Number of hours: 38,000 H Closing Closing force: 650T Opening stroke: 930 mm Between columns: 1000 x 9000mm Tray dimensions: 1450 x 1350 mm Mini / maxi mold: 450/950 mm Max distance between plates: 1880 mm Injection: Screw diameter: 95 mm Screw length: 20D cm3: 3367 Bars: 1895 General: Engine power: 74 kw Heating power: 43 kw Closing weight: 25t Injection weight: 80tonnes Dimensions length: 10.10m Dimensions width: 2.50m Dimensions height: 2.60 m Options: Cores: 4 Robot interface: yes Bi metal: yes Others: 8 sequential, 24 zone hot runners, magnetic plate,