acessórios para máquinas-ferramentas usadas para venda (2,482)

steel cabinet with diverse SK 40 toolholders Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

consisting of 39 pieces, partly shrunk, partly normalincl. tool carrier systemReference: Alesco - Lot 46 Auction-ID: A7-49882-24

Chuck 200 mm; with various accessories Auction-ID: A1-49659-153

liter capacity:21 l/minPressure of coolant:50 barrated current:20 AClean water tank capacity:300 ltotal power requirement:16 kWweight of the machine ca.:200 Kgdimensions of the machine ca.:1,2 x 0,8 x 1,4 mWe are importers for FRASCARA high pressure coolant systemsFrascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min.We can provide up to 3 pressure levels controlled by M-Functions.Oil operated systems are available also.Areas of application:Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machinesFunction:The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 ba ...

diameter:310 mmweight of the machine ca.:0,03 tbore:65 mm

length in total:1200 mmband width:500 mmconveying height:1200 weight of the machine ca.:1 tdimensions of the machine ca.:4,0 x 1,5 x 2,2 mswarf conveyor with coolant attachmentTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

faceplate diameter:450 mmweight of the machine ca.:0,15 tdimensions of the machine ca.:0,5 x 0,5 x 0,2 mBore:130 mm

Serial number: 564/90Operating voltage: 380 VControl voltage: 220 VConnection: 0.75 kWRated current: 10 AReference: Walter - Lot 160 Auction-ID: A7-49834-21

length:1200 mmwidth:500 mmheight:1260 mm

faceplate diameter:620 mmweight of the machine ca.:0,15 tBore:130 mm

We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95.The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box.Also some tool pots are damaged.Can be repaired or used as spare parts

faceplate diameter:500 mmweight of the machine ca.:0,1 t4-jaw faceplate for studs and locknut

Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mmlength:75 mm90° angle rotary tool holder BMT 40There are two units available. Both are like new and never used.External coolant up to 80 bar.

size of pallet:400x400 mmnumbers of pallets:15 table load:400 kgweight of the machine ca.:0,060 tdimensions of the machine ca.:0,4 x 0,4 m15 pallets for Makino A 55, size 400 x 400 with T-slots for sale

length:1000 mmwidth:800 mmweight of the machine ca.:0,7 tdimensions of the machine ca.:1,0 x 0,8 x 1,4 mHardstone measuring plate complete with FISCHER tailstocks and 4 leveling elements.

floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m

floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m

tool taper:50 weight:0,04 t

diameter:500 mmtool adaptor:50 Weight:12 kgface movement each head:82 mmfeeds:0,06 mm/U

workstation with dust exhauster

feed pressure:13 bartotal power requirement:3 kWweight of the machine ca.:0,15 tdimensions of the machine ca.:1,0 x 0,8 x 1,2 mHigh pressure air cooling device

length:500 mmwidth:320 mmheight:800 mmweight of the machine ca.:0,25 tAngular clamping device made by cast ironwith 5 T-slotss 22 mm

weight:400 kg8 clamping jaws each ca. 600 x 210 x 170 mm , hole dia. 22 mm, center distance ca. 170 mmwas used for clamping rings on a Vertical Turning Machine

Article: profile turning trip dogManufacturer: SchütteMany different sizes for Schütte profile turning attachment 68AEPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Unused AC motor made bei E.M.G. Italy with 260 Watt power and adapted Cucchi pump

Technical description :CLAMPING/ MOUNTING TABLE- Length 2600mm- Width 1500mm- Height 250mm

consisting of 40 pieces Reference: Alesco - Lot 42 Auction-ID: A7-49882-23

pickoff with shaft for Schutte multi spindle automatic lathe SF67, usedpickoff C26GFpickoff shaft C26GF9S1gear WG-67SPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: draw barManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: quadrant leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com