acessórios para máquinas-ferramentas usadas para venda (1,726)

Dimensions (L/W/H): 1817 x 578 x 2115 mmFilter capacity: 4,4 m²Number of filters: 2 St.Number of dust containers: 2 St.Weight: 74 kgDimensions (L/W/H): mm: 160 mm: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Required air-pressure: 6 bar0: 6 mcoolant capacity: 7 m3/hAir Operated Diaphragm PumpType(s) DL25The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Required air-pressure: 7 barweight: 3 kgdimensions of the machine ca.: 212 x 265 X 200 mm BxHxTAir Operated Diaphragm PumpType(s) DL15-PM-TTTTechnical data:- Connection size medium - 1/2 BSPT female thread- Material housing - PP polypropylene- Center section - PP polypropylene- Diaphragm material - PTFE- O-ring material - PTFE- Check valve material - PTFE- Max. flow rate - 2.2 m³/h- Max. medium pressure - 7 bar- Compressed air supply - up to 7 bar- Solid size max. - 2.5 mm- Dry suction max. - 2.5 m- Dimensions WxHXT - 212 x 265 X 200 mm- Net weight - 3.5 kgPTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C.PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Temperature range: 0°C - + ...

grinding length: 600 mmgrinding width: 400 mmworkpiece height: 400 mmtotal power requirement: kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3592 x 3519 x 2203 mmHorizontal surface grinder in almost new condition with few operating hours!Operating hours: see imageOkamoto Touch Screen ControlTravel X-axis: 600 mmTravel Y-axis: 22.5 – 497 mmTravel Z-axis: 400 mmSpeed range rpm: 1-2800 (stepless)Rapid traverse mm/min: 4000Main drive kW: 7.5Maximum table load in kg: 1000Accessories:- Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner)- 2 grinding wheel flanges- Table dresser- Automatic straight dresser, spindle box mounted- Automatic compensation of the wheel dressing amount- Automatic central lubrication- Ball screw in the Y and Z axes with AC servo motor and measuring system- Coolant system with belt filter systemThe data for this ad ...

faceplate diameter: 1600 mmThickness: 170 mmCone: 285 mm: 330 total power requirement: . kWweight of the machine ca.: . kgdimensions of the machine ca.: . mOptional with 4 jaws €3750With bed from Schiess KZ 250Optionally, a Schiess KZ 250 drive gear can be purchased for €9,500The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the sof ...

faceplate diameter: 1400 mmThickness: 200 mm: 650 total power requirement: . kWweight of the machine ca.: 1000 kgdimensions of the machine ca.: . m340 rpmBolt circle: 330 mmFit: 285 mmJaw width: 55 mmThickness: 170 mmOpening: 145 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mmThickness: 240 mmT-slot - distance: 175 mmtotal power requirement: . kWweight of the machine ca.: . kgdimensions of the machine ca.: . mOptional with 4 jaws €3750The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mmThickness: 240 mmT-slot - distance: 175 mmtotal power requirement: . kWweight of the machine ca.: . kgdimensions of the machine ca.: . mOptional with 4 jaws €3750With bed from Schiess KZ 250Optionally, a Schiess KZ 250 drive gear can be purchased for €9,500The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS -  ...

table length: 1500 mmtable width: 1500 mmtable load: 10 tvoltage: 380 VControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHeidenhain D.R.O.Additional plate on rotary table: 2.000 x 3.000 x 3.000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 420 800 mmno. of flutes: 9 groove width: 12 / Abstand 45 mmweight of the machine ca.: 110 kgdimensions of the machine ca.: 10,50,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mmtotal power requirement: . kWweight of the machine ca.: 590 kgdimensions of the machine ca.: . m340 rpmBolt circle: 330 mmFit: 285 mmJaw width: 55 mmThickness: 170 mmOpening: 145 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rated capacity: 4,1 kWcurrent intensivity: 7,2 Atemperature: max. 65,8 °Coperating pressure: max. 42 bartemperature: (Water): max. 35 °Coperating pressure: (Water): max. 6 barAmbinent temperature: -5 / +43 °Cweight of the machine ca.: 143 kgdimensions of the machine ca.: 1,3 x 0,6 x 0,8 mChillerICS COOL ENERGY - IC 220- Refrigerant R410AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 42 - 80 mmlength: 350 - 520 mmtool adaptor: MK4, MK5, MK6 12 twist drills, also available individually:1 MK6, diameter 80 mm EUR 150.001 MK5, diameter 70 mm EUR 90.002 MK5, diameter 60 mm EUR 60.00 each3 MK5, diameter 55 mm EUR 55.00 each2 MK5, diameter 50 mm EUR 55.00 each1 MK5, diameter 42 mm EUR 55.00 1 MK4, diameter 50 mm EUR 45.00 1 MK4, diameter 45 mm EUR 45.00 plus VATMachine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engine output: 3 x 1000 Wattelectric 230 volt: Well-maintained industrial dry vacuum cleaner with 3 motors totaling 3 kW, refurbished hose, floor suction nozzle with tube, 3 suction nozzles. Suitable for the separation of dusts with MAK values with carcinogenic substances of groups II and III. Filters of dust classes E and N, manual cleaning with a shaker bar, dust container approx. 35 l located at the bottom with foot pedal emptying. Unit for heavy-duty commercial use.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 8 St.tool trolleywith tool set 272 pieces.See picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 960 x 460 x 860 mmweight: 75 kg: 7 St.Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers)High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set.Features & Quality:– Ball-bearing, extendable drawers– Central locking mechanism / lockable– 4 casters (2 swivel, 2 lockable)– Tools made of chrome vanadium steel– Tools neatly stored in foam insertsDrawer 1Ratchet and socket sets 1/4, 3/8, and 1/2, including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm).Drawer 2Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4, 3/8, and 1/2.Drawer 3O ...

diameter: 3 - 16 mmlength: 3000 mm= bar loading magazinfor bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmøThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: ltotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: ltotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 130 mmspindle bore: 18 mmratio: 40:1 swivellable: - 10° bis 90° °groove width: 16 / 18 mmweight: 35 kgdimensions of the machine ca.: 0,5 x 0,25 x 0,25 mCondition: unused: Unused semi-universal dividing set:- Spindle in precision tapered roller bearings- Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground- Translation disengageable for direct sharing- each division 2 to 50 and many divisions to 380accessories:Tailstock, 2 part washers, centering point, driver and chuck flangeMachine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1200 mmwidth: 500 mmfloor-plate height: 105 mmweight of the machine ca.: 400 kgElectric magnetic plate from WAGNER, a transformer is required for operation /Rectifier required. 110 volts, 2.86 amps. Reduced special price.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: °internal length of the oven: mminternal width of the oven: mminternal height of the oven: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 1500 mmplate depth: 4200 mmplate height: 350 mmtotal power requirement: kWweight of the machine ca.: 5 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 600 lPressure of pump: 2 / 3 / 40 barcontrol: Schütze / Contactorstotal power requirement: 11 kVAweight of the machine ca.: 450 kgdimensions of the machine ca.: 1,80 x 1,35 x 1,70 mCoolant SystemINTERLIT (DMG) - BFA 600-A/40/2/3 50/60 HZ- Very good condition- Connected to DMU 50 3rd Edition- Controllable via contactors- Incl. paper belt filter- Number of pumps: 3- Pump capacity:0.63 kW, 2,750 rpm (50 Hz), 60 l/min, 20 m2.89 kW, 3.75 HP, 2,880 rpm (50 Hz), 24/22-30/27 l/min3.10 kW, 4.20 HP, 2,930 rpm (50 Hz), 160 l/min, 40 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: kWfeed pressure: 16 barliter capacity: 500 ltotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mAir compressorOperating temperature TS min 10 TS max. 50 degreesThe technical data is provided by the manufacturer or operator and is thereforenon-binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively.About us:More than 400 of our own machines in stockOver 15,000 m² of warehouse space, 70-ton crane capacityMore than 10,000 accessories for your workshopIf you want to sell machinery, production lines, or your business,please contact us.Further offers can be found on our website.Viewings are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amplification -fold: 30 spindle taper ISO: 40 spindle taper:: M16 / DIN 2080 voltage: 6 VPacking: 0,430,25010 mShipping weight: 4 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

quality grade: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 76 mmcentre distance: 190 mmspindle bore: 21 mmtaper MK: 3 weight of the machine ca.: 40 kgdimensions of the machine ca.: 720 x 210 x 215 mmcollets: tailstock: dead centres: Barely used Jung optical dividing head with tailstock in a wooden box with 9 collets: 3, 4, 5, 6, 7, 8, 9, 10, 11 mm. Reduced special price.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 980 lPressure of pump: 8 / 20 / 80 barcontrol: Schütze / Contactorstotal power requirement: - kWweight of the machine ca.: 765 kgdimensions of the machine ca.: 2,3 x 2,0 x 1,8 mCoolant SystemMAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8)- NEW, unused- universally applicable- can be controlled via contactors- incl. paper band filter- Number of pumps: 3- Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°CThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 980 lPressure of pump: 8 / 20 barcontrol: Schütze / Contactorstotal power requirement: - kWweight of the machine ca.: 560 kgdimensions of the machine ca.: 2,3 x 2,0 x 1,8 mCoolant SystemMAYFRAN - BFU 980 /S/20+/8- NEW, unused- universally applicable- can be controlled via contactors- incl. paper band filter- Number of pumps: 2- Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°CThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.