procura detalhada
36985 resultados
usava
Ano de construção: 1990
usava
turning diameter:1600 mmturning length:12000 mmcontrol:FAGOR 8050 Used CNC Lathe with FAGOR 8050 and extensive accessories.For further technical data and accessories, pls browse the Appendix.Parallellathe WMWmod. 4 GUIDE-WAYS¦ CNC: FAGOR 8050¦ bed: monolithic¦ centres height: 800 mm¦ centres distance: 12000 mm¦ swing over cross-slide: 1250 mm¦ turret: automatic 4 positions¦ tailstock: motorized¦ tailstock connection: hydraulic¦ platform: diam. 1000 mm¦ steady rests: nr.02¦ chip conveyorWarranty: noneTake advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it.
Ano de construção: 2004
usava
max. wheel diameter:300 mmgear width:100 mmmax. module:5 workpiece turning speeds:0 - 1000 1/minwork piece - max.:1100 mmworkpiece clamping:auto. tension device number of spindle speeds:1000 1/min.spindle bearing diameter:100 mmdiameter of spindle flange:120 mmtailstock travel:80 mmweight of the machine ca.:3500 KGdimensions:1200 x 1450 x 2250 mmtotal power requirement:10 kVAThe Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.
Ano de construção: 1982
usava
pressure:350 tdistance between columns:1350 mmstroke:900 mmdistance table/ram, max. stroke up, adjustment up:1300 mmtable surface area:1300 x 1000 mmpressure of drawing cushion in table:100 tstroke of drawing cushion in table:380 mmdie cushion area:350 x 285 mmcapacity of ejector in ram:25 tejector stroke in ram:200 mmtable height over floor:750 mmram surface:1300 x 1000 mmspeed down:500 mm/sspeed up:160 - 470 mm/sworking speed:16 - 44 mm/sdrawing speed:57 - 160 mm/sreturn capacity:32 toil volume:1700 lpower requirement:91,0 kWDimensions (WxDxH):3,75 x 2,8 x 7,2 mheight over floor:5,28 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick drawing cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:in TDC foundation pit:necessary
Ano de construção: 1982
usava
FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 170 mmMACHINE CHARACTERISTICS SWAGING force: 1000 kN stroke rate (max.): 560 /minPRODUCT (PROFILE, TUBE) length min.: 4000 mm lenght max.: 12000 mmcomplete line including hammer and tube handlingmin. end diameter: 12 mmmax. end diameter: 110 mmlength of the conical tool part: 190 mm (for hammering)work feed speed: 0-100 mm/secrapid speed: 200 mm/secproduction output: approx. 260 pcs/h (application dependent)
Ano de construção: 2001
usava
X-travel: 560mm, y-travel: 560mm, z-travel: 510mm, pallet clamping surface: 400x400mm, tool cone: SK40, rotational speed: 18,000/min, controls: SIEMENS 840D, weight: 8.2t, without accessories, with documentation.
Ano de construção: 2011
usava
Travel X/Y/Z: 1060mm/610mm/610mm, speed: 12000rpm, table dimensions X/Y: 1270mm/610mm, table load (uniform): 1350kg, feed: 15200mm/min, rapid traverse X/Y/Z: 35/35/30m/min, flutes/width: H8/18mm, flute spacing: 100mm. Control: Hurco WinMax, dimensions X/Y/Z: 2800mm/2200mm/2770mm, weight: 6800kg. In need of repair with new or overhauled spindle. Documentation available. On-site inspection is possible.
Ano de construção: 2014
usava
Compressed air supply: 6-8bar, connected load: 30kVA, length: 3280mm, width: 4820mm, height: 2385mm, weight: 2t, operational hours counter: 485h, with documentation.
usava
turning diameter:1390 mmturning length:14000 mmweight of the machine ca.:13 tMore information can be found in the Appendix.
Ano de construção: 2009
usava
Ano de construção: 1983
usava
saw blade diameter:400 mmtotal power requirement:380 V, 1,7/2,6 kWweight of the machine ca.:850 kgdimensions of the machine ca.:1100 x 1050 x 1620 mm
usava
pressure at min. stroke:3 tthroat:150 mmstroke:- 39 mmdistance table/ram, max. stroke up, adjustment up:200 mmtable surface area:280 x 380 mmpressure at min. stroke:1,5 tno. of strokes with min. stroke:- 80 /minno. of strokes with max. stroke:- 50 /minhole in the table:45 mmtable height over floor:790 mmram surface:115 x 100 mmRequired air-pressure:4 barweight:0,2 tDimensions (WxDxH):0,5 x 0,9 x 1,4 m
Ano de construção: 1990
usava
CHARACTERISTICS HEAT TREATMENT EQUIPMENT heating method: gas temperature min.: 420 °C temperature max.: 930 °C throughput, capacity: 10000 kg/hThroughput per hour+ 420-680 degrees Celsius: 10'000kg+ 830-930 degrees Celsius: 7'150kg
Ano de construção: 2012
usava
Connected load: 60kVA, controls: SIEMENS SINUMERIK, length: 5650mm, width: 6200mm, height: 4320mm, weight: 26.57t, with documentation, without y-travel.
Ano de construção: 1985
usava
Travels: 1200mm/700mm/650mm, table dimensions X/Y: 1550mm/650mm, torque: 410Nm, control: Heidenhain 426. On-site inspection is possible.
Ano de construção: 2010
usava
Electrode force: 736daN, connected load: 90-300kVA, weight: 178kg.
novo
turning diameter:950 mmswing diameter:1200 mmturning height:800 mmfaceplate diameter:800 (hydr.) mmspindle drive:37/45 kWweight of the machine ca.:16,5 tdimensions of the machine ca.:4600x5500x5330 mmnew machine ex stock Taiwan with: Max. Swing Diameter 1200mmMax. Turning Diameter 950mmMax. Turning Height 800mmFANUC 0iTD Control System High Pressure Pump(7kg/cm2 ) Auto Luberication System Tool Holder BT50 for RAM Main Spindle Motor 37/45kw X Axis AC Motor 4.0 kw Z Axis AC Motor 7.0 kwC-axis Motor a8 7.5/11kw+MZI(0-2400RPM) Brake System for spindle X Axis Rapid Feedrate 20 m/min Z Axis Rapid Feedrate 20 m/min X Axis Travel :645 mm Z Axis Travel :800mm ATC Tools 12 Tools Spindle Nose A2-15 ZF Gear box Germany Chip Conveyor & chip car Oil/water separator Hydraulic system 3 Jaw Power Chuck 32" Hydraulic Unit Work Light Auto Lubrication SystemPower requirment 75KVAMachine Size :4280*2800*4680 ...
Ano de construção: 1999
usava
max. wheel diameter:200 mmgear width:250 mmmax. module:3 min. module:0,5 total power requirement:45 kWweight of the machine ca.:8,5 tdimensions of the machine ca.:4,4 x 2,4 x 2,7 mMachine out of prototype productionWithout automation
Ano de construção: 1979
usava
cutting diameter:260 mmband length:450 x 4 x2 mmtotal power requirement:22,6 kWweight of the machine ca.:1024 kgdimensions of the machine ca.:1500 x 2310 x 955 mmsquare:240 x 240 mmflat material:260 x 180 clamping capacity:40 barDocuments:vorhanden
usava
pressure at min. stroke:3 tthroat:150 mmstroke:- 40 mmdistance table/ram, max. stroke up, adjustment up:200 mmtable surface area:280 x 250 mmpressure at max. stroke:1,5 tno. of strokes with min. stroke:- 80 /minno. of strokes with max. stroke:- 50 /minhole in the table:45 mmtable height over floor:810 mmram surface:115 x 100 mmRequired air-pressure:4 barweight:0,15 tDimensions (WxDxH):0,7 x 0,8 x 1,4 m