procura detalhada
36998 resultados
Ano de construção: 1995
usava
Controls: Philipps CNC 3460, operational hours counter: 24,325h, the machine needs overhauling, stops irregularly and misses reference points, the monitor is defective.
usava
Collet: SCHAUBLIN W25, controls: FANUC GE, including loader.
Ano de construção: 2012
usava
The plant was set up once in 2012 and then dismantled and put into storage, includes Anti-Drift Device Oerlikon ADVi 40x45 So and Section Assembly Line Oerlikon RB-AFV/FV 7500 So, with documentation, no videos available, can be inspected on site in stored condition.
usava
usava
Ano de construção: 1992
usava
X-travel: 270mm, y-travel: 480mm, z-travel: 110mm, U-travel: -100 to 106°, max. workpiece diameter: 25mm, workpiece length between the tips: 40-180mm, controls: FANUC, connected load: 42kVA, weight: 9t.
Ano de construção: 2008
usava
X-travel: 2520mm, y-travel: 1550mm, z-travel: 300mm, max. sheet thickness: 12mm, max. workpiece weight: 330kg, cutting speed: 0-20m/min, controls: AMNC-F, connected load: 70kVA, weight: 7.5t, operating hours: 23,600h, with Resonator Fanuc AF 2000 E (LU 2.5), laser power: 2500W, laser wavelength: 10.6μm, with adaptive optics (Active Cut), sensor cutting head HS-2003, high-pressure cutting device (Clean Cut), aluminium cutting device (Alu Cut), focus point adjustment, gas pressure adjustment, resetting device, parts flap, extraction system, cooling unit, beam path rinsing and diode laser for positioning.
Ano de construção: 2001
usava
FEEDSTOCK TUBE length min.: 4000 mm lenght max.: 12000 mmMACHINE CHARACTERISTICS SWAGING force: 2000 kN stroke rate (max.): 740 /minPRODUCT (PROFILE, TUBE) external diameter min.: 30 mm external diameter max.: 127 mm wall thickness min.: 1.5 mm wall thickness max.: 11 mm length min.: 4000 mm lenght max.: 12000 mmcomplete line including hammer and tube handlinghammering length: 180-300 mmhammering time: approx. 15 secondstotal hammering time: approx. 21 seconds (incl. loading and unloading)production capacity: approx. 170 pcs/hinclusive:+ pipe adjustage GFU ZS-2000 kN+ various GFU hammer jaws (30-110 mm)
Ano de construção: 1986
usava
Rotational speed: 70-580/min, connected load: 5kW, weight: 3t.
usava
Ano de construção: 2005
usava
Table dimensions: 2000x4000mm, max. stainless steel/ steel thickness: 20/ 25mmm, fuel: oxygen, propane, controls: CNC-801, with documentation and plasma power source Powermax 1650, the extraction needs overhauling.
Ano de construção: 1997
usava
CONTROLS PLC SIEMENS S5 FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 38 mm wall thickness min.: 2 mm wall thickness max.: 4 mm length min.: 52 mm lenght max.: 200 mmSystem consists of:+ BÜHLMANN (system construction), YoM 1997+ BACHMANN ABB robot cell, YoM 2014+ BROTHER TC-S2DN-0 CNC machining center, YoM 2012
Ano de construção: 1995
usava
X-travel: 650mm, y-travel: 410mm, z-travel: 410mm, number of tool slots: 10, tool cone: SK 40, rapid traverse: 15m/min, clamping surface: 850x410mm, max. table load: 300kg, controls: SIEMENS Sinumerik 840D.
Ano de construção: 1974
usava
Ano de construção: 2007
usava
Max. Laser power: 400W, operating hours: 28. 200h, with WinLas laser programming software, storage option for 99 laser programmes Optical setup for one laser light cable with fast switch (50ms switching time), optical setup can be extended to a maximum of 4 laser light cables, pilot laser with plasma sensor holder, Control of the pilot laser via laser operating software, beam guidance and shaping, LLK-B 06 laser light cable, length 40m, fibre diameter 600mm, suitable for robots, BEO 7000210p processing optics for laser welding, lens with focal length 200mm, Protective glass cassette for easy replacement of the protective glass, collimation 0° with defocussing and observation by camera, CCD camera, b/w monitor, adjustable crosshairs, camera supply cable, 30m long, and BNC video cable, 10m long, optics protection by Laval Crossjet, Design of the robot cell with suspended robot, KUKA KR 30 ...
Ano de construção: 2007
usava
CONTROLS PLC SIEMENS S7 FEEDSTOCK TUBE external diameter min.: 40 mm external diameter max.: 150 mm length min.: 260 mm lenght max.: 1500 mmELECTRICAL SPECIFICATIONS total power consumption: 155 kW mains power supply: 280 kVA mains voltage: 400 V mains frequency: 50 HzSystem consists of:+ FELSS AYIMUS H02-4NC precision axial forming machine, year 2007+ SONTEC PR 2290 shaft testing machine, year 2007+ BACHMANN BFH 4400 automatic palletizer, year 2007Exclusions from supply (even if visible on photos)- without chip breaker- without laser marking system
usava
X-travel: 800mm, y-travel: 700mm, z-travel: 600mm, rotational speed: 12,000/min, max. tool diameter/ length: 80/ 350mm, max. tool weight: 10kg, max. load: 800kg, operational hours counter: 52,199h.
usava
Vertical/ horizontal spindle stroke: 80/ 220mm, feed rate: 1250mm/min, table dimensions: 250x800mm, length: 2300mm, width: 2650mm, height: 2300mm, weight: 1.45t.
Ano de construção: 2011
usava
Max. workpiece dimensions: 1500x300mm, laser power: 3kW, max. load: 5t, operational hours counter: 5364h, with loading table, suction units for removing the sheets from the loading trolley, configuration ADL30-PMC30-TLE30 155C L5-30ASF, unloading trolley, enclosure, pallet storage rack, workbench, storage table, chip trolley and documentation, an inspection is possible, was maintained regularly.
Ano de construção: 2002
usava
CONTROLS PLC SIEMENS S7 300 FEEDSTOCK TUBE external diameter min.: 59 mm external diameter max.: 100 mm wall thickness min.: 1.5 mm wall thickness max.: 3 mm length min.: 3000 mm lenght max.: 12000 mmPRODUCT (PROFILE, TUBE) length min.: 400 mm lenght max.: 1500 mmSystem consists of:+ ASMAG pipe cutting system+ HU 32-WS-HU3-SP250 forming system+ ABB stacking stationmax. bundle weight: 5'000 kgmax. bundle diameter: 800 mmABB robot working area: 4500 x 4100 x 2500 mm