procura detalhada
37015 resultados
Ano de construção: 1990
usava
Max. workpiece diameter: 10-350mm, max. grinding length/ width: 690/ 60mm, clamping length: 950-1330mm, swing angle: -60 to 60°, length: 6200mm, width: 4000mm, height: 2500mm, weight: 9t, with oil filtration system, oil mist extraction and additional accessories.
Ano de construção: 1998
usava
Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation.
Ano de construção: 2002
usava
FEEDSTOCK TUBE external diameter min.: 10 mm external diameter max.: 105.5 mm wall thickness min.: 0.8 mmPRESS FORCES total force (nominal): 300 to
Ano de construção: 1989
usava
X-travel: 1600mm, y-travel: 520mm, z-travel: 425mm, table dimensions: 2300x570mm, table height: 900mm, connected load: 36kVA, length: 4100mm, width: 3300mm, height: 2900mm, weight: 7t, operational hours counter: 62,437h, with documentation, was maintained regularly.
usava
Machine bed length: 16,000mm, roller table diameter: 200mm, load: 150kg/m, band width/ length: 150/ 3500mm, with documentation, the machine needs overhauling.
Ano de construção: 2014
usava
Including accessories, cutting head, welding head 150mm, setting master for cutting head and welding head, communication interface external periphery, automatic front door with servo motor, support frame, the right side door has an opening for pipe processing, this must be closed with a sheet of metal on both sides, battery from the PC must be replaced, the software must be reset for normal operation, with Laser Trumpf TruDisk 3302, laser power: 3300W, connected load: 20kVA, weight: 850kg and Cooling Device KLH RL 16/0 SK IEC.
Ano de construção: 2001
usava
CONTROLS PLC SIEMENS FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 35 mm length min.: 70 mm lenght max.: 250 mmThe system is designed for hardening, drying and oiling cam tubes.The bunkers are loaded and unloaded manually. The system automatically removes the cam tubes from the loading bunker and places them automatically in the unloading bunker. The cycle time depends on various parameters, such as workpiece length, workpiece diameter, number of hardening zones, lengths of the hardening zones and the hardening depth.The complete system consists of:1 x base frame with collecting tray for the quenching medium 1 x lifting beam for simultaneous infeed and outfeed of the cam tubes 1 x horizontal slide with servo geared motor for holding the HF oscillating circuit transformer for 4-fold inductor and 2x 4-fold shower ...
Ano de construção: 1992
usava
Length: 800mm, width: 600mm, height: 2000mm, weight: 825kg.
Ano de construção: 1992
usava
Max. grinding length/ width: 600/ 375mm, max. working height: 465mm, max. load: 300kg, groove width: 16mm, length: 3300mm, width: 2700mm, height: 2380mm, weight: 3.5t, including accessories and documentation, was maintained regularly.
Ano de construção: 2000
usava
Arm length: 550mm, max. welding power: 136kVA, length: 640mm, width: 930mm, height: 1550mm, weight: 290kg.
Ano de construção: 1967
usava
CHARACTERISTICS HEAT TREATMENT EQUIPMENT heating method: electric temperature min.: 420 °C temperature max.: 930 °C throughput, capacity: 6000 kg/hThroughput per Hour+ 420-680 degrees Celsius: 6000kg+ 830-930 degrees Celsius: 3200kg- Red tube storage racks next to the furnace not included
Ano de construção: 2012
usava
X1-travel: 1280mm, x2-travel: 960mm, z-travel: 180mm, spindle mount: HS 32, max. rotational speed: 6000/min, length: 4500mm, width: 5000mm, operational hours: ca. 15,000h, suitable for turning, knurling, thread cutting, smoothing, eddy current testing, with two rotary axes, feed for shafts via step conveyor and feed-through chuck Ø42, discharge belt with sorting, emulsion preparation, chip discharge belt and double extraction with separator, was maintained regularly.
usava
Table dimensions: 1400x4000mm, feed rate: 2-16m/min, length: 4500mm, width: 10,500mm, with documentation.
Ano de construção: 2011
usava
With High Pressure Pump KMT STREAMLINE SL-V50 Classic C and accessories, without abrasive agent.
Ano de construção: 1995
usava
FEEDSTOCK TUBE external diameter min.: 10 mm external diameter max.: 105 mm wall thickness min.: 0.8 mm length min.: 20 mmPRESS FORCES total force (nominal): 200 to
Ano de construção: 1997
usava
Controls: MAZATROL M PLUS, weight: 5.85t, operational hours counter: 42,150h, with magazine and accessories.
usava
Ano de construção: 1982
usava
Portal width: 6500mm, track length: 16,000mm, number of burners: 4, with documentation.
Ano de construção: 1995
usava
ELECTRICAL SPECIFICATIONS total power consumption: 57 kW mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4900 mm space requirements -front/back-: 2600 mm total height: 2600 mm total weight approx.: 2600 kgWashing medium: solvent-freebasket/rack size 790 x 590 x 600 mm cabin dimensions 1200 x 1200 x 1200 mmuseable volume 800 x 780 x 900 mmnet weight of batch ; 200 kgAttachments:Dosing unit DOSANTEC A763-168Mbuffer tank 100 ltrWaste water tank 75 ltrrotating spraying cross from toprotating spraying cross from bottomDrying device (circulating air) wi ...
usava
There are one Weyrauch SW 32-G and one Radial Drilling Machine Plank SRB-18H available, the drilling machine Weyrauch needs overhauling.