14 TRANSFLUID máquina utilizada para venda

tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...

tube diameter: 6 - 28 mm wall strength: 2 mm bending radius min.: 2 x D Control: IPU 20 bending radius max.: 5,0 x D mm bending angle max.: 190 ° arbor length: 3000 mm operating pressure: 180 bar hydraulic motor: 4 kW weight of the machine ca.: 900 kg dimensions of the machine ca.: 3,8 x 1,1 x 1,3 m Condition: ready for operation: Video available on our website.: Electric 400 Volt: Bending segments: 15-20-26-28 mm Bending mandrels: 4 Operation panel: 0,5 x 0,6 x 1,03 m Double Foot pedal: Machine manual: Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi ...

Bending direction: clockwise, steel tube diameter: 50mm, steel tube thickness: 3mm, stainless steel tube diameter: 50mm, stainless steel tube thickness: 2mm, max. section modulus: 5cm³, bending angle: 180°+10°, max. tube length: 2000mm, max. radius range: 150mm, bending height: 1050mm, bending head length: 850mm, min. bend spacing: 400mm, nominal pressure: 250bar, operating pressure: 200bar. Machine dimensions X/Y/Z: approx. 3200mm/1400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

tube diameter: 40-168 mm wall strength: . mm bending radius min.: ohne Rohr 190 mm Electrohydraulic: : mit electro motor: 30 kW voltage: 380 V operating pressure: 200 bar Double control pump: je. 46 l/m Pump control: 4/3 Wege Ventile Pump pressure medium: Hydrauliköl der HLP 300 ltr. : Hydraulikzyl. Rollenkette E-Control: Tastatur, Steuerung SPS total power requirement: kW weight of the machine ca.: 22 t dimensions of the machine ca.: 30 m2 m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find furth ...

tube diameter: . mm wall strength: 15 St52 und Edelstahl mm bending radius min.: 6-120 mm : : 6-42 mm Hydraulikrohre dimensions: L/B/H 2000x2000x1300 mm operating pressure: 200 bar filling amount: ca. 70 l 0: 20000 ml 0: 5,5 kW voltage: 400 V rated current: max. 16 A control: 4/3 Wege-Ventil bending angle max.: 150 ° Duty cycle: 100 % Radius range between: 2xD und 3,5 x D total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact  ...

Faixa de desempenho: 20mm-60mm, ângulo de flexão máximo: 180+10, raio de flexão máximo: 150mm, comprimento efetivo: 3048mm, altura de flexão: 1050mm, módulo máximo da seção: 12,1cm³, tolerância de flexão: +/-0,1, pressão de operação: 200bar, carga conectada: 4kW, dimensões da máquina X/Y/Z: aprox. 2000mm/900mm/1200mm, peso: aprox. 500kg. Documentação disponível. É possível uma inspeção no local.

Tube diameter stainless steel: bis 42 x 2,0 mm tube diameter steel: bis 42 x 3,0 mm bending angle max. +/-: 180 + 10 ° section modulus: 4,1 ccm operating pressure: 6 bar total power requirement: 5,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 6100 x 2300 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-28 mm bending radius min.: 1,5 x D - 2,0 x D mm Control: Siemens LOGO delivery rate: 4,5 l/min bending angle max. +/-: 190 ° nominal pressure: 250 bar operating pressure: 3095 bar delivery rate: 4,5 l/min total power requirement: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-28 mm total power requirement: 1,5 kW weight of the machine ca.: t dimensions of the machine ca.: m - bending type: 4-28 mm - bending angle: 190° (ohne Rohr) - bending radius: 1,5 x D – 2,0 x D - nominal pressure: 250 bar - operating pressure: 3095 mm n. re. - delivery rate: 4,5 l/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending angle max. +/-: 180 + 10 ° tube: 4100 mm - Round tube steel up to 30 x 2.2 mm ² - Round tube stainless steel up to 30 x 1.5 mm - Square tubes 20 x 2.5 mm - Bending time 90 degrees: 1.5 sec (feed) - Length feed speed: 450 mm - Radius range max 125 mm - Free-standing bending head 850 mm long - Bending axis drive electrohydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Área de trabalho tubo de aço  até 30 mm x 2 mm - Área de trabalho do tubo em aço inoxidável  até 30 mm x 1,5 mm - Comprimento de extensão do tubo 2.000 mm - Ângulo de flexão até 180 + 10 overbending - Sequência de flexão automática (flexão, torção, longitudinal) - Controlo CNC - PC de entrada com software Transpro V2 + pacote Tanspro V2 (indicação do proprietário anterior) - Função de acionamento via interruptor manual - Sentido de curvatura no sentido dos ponteiros do relógio - Raio máx. 125 mm mm -Automático. Lubrificação de mandril - Scanner a laser para área de segurança - Inclui ferramenta usada existente para tubo de aço inoxidável 1 mm  15, 18, 22, 28 mm Raio de curvatura 1,5 D (vários alisadores de rugas, mandris

tube diameter: 60 mm wall strength: 6 mm bending radius min.: 180 ° total power requirement: 5,5 kW weight of the machine ca.: 1300 kg dimensions of the machine ca.: 3500 x 1250 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Tubo redondo de aço DM 6 – 42 x 5 mm - Tubo redondo em aço inoxidável DM 6 – 42 x 3 mm - Comprimento do tubo push-on máx. 6.000 mm - Controlador lógico programável até 20 ângulos - Visor digital de deslocamento longitudinal - Visor digital de torção - Retração programável e antecipatória do mandril - Sistema de lubrificação Mandrel por bomba manual - Recetáculo mais suave para rugas - Velocidade de flexão máx. 13/seg - Ângulo de curvatura até 180 + 10 deflexões - Alimentação manual - Torção manual - Direção de curvatura direita - Raios de 1,5 D - Ferramenta de flexão: - DM 12 mm - raio 36 mm ) / DM 15 mm - raio 37,5 mm - DM 18 mm - raio 36 mm - DM 22 mm, raio 44 mm com mandril - DM 42 mm, raio 44 mm com mandril

Máquina de dobra hidráulica com muitos acessórios Pré-seleção de 8 ângulos de curvatura diferentes com visor digital Visor de comprimento digital, bem como display digital de torção Comprimento máximo efetivo: 6096 mm Aço de tubo redondo (S 235): 60,0 x 6,0 mm Tubo redondo em aço inoxidável (S 355): 60,0 x 4,0 mm Tubo quadrado em aço: 50 x 50 x 4,0 mm Tubo retangular em aço: 60 x 40 x 2,0 mm Ângulo máximo de flexão: 180° Peso: aprox. 1800 kg