40 ZIMMER máquina utilizada para venda

Unidade giratória de ângulo, precisão 0.01, SW100D4-C, quarto, novo Preço especial Ainda temos vários dispositivos idênticos e outros, mas a quantidade está a acabar. Compre mais de 1 peça ainda há um ótimo desconto. Se tiver um número de IVA, teremos todo o gosto em emiti-lo com uma fatura sem IVA. Tão bom quanto novo na embalagem original! A peça foi comprada num armazém de peças sobressalentes de uma empresa e nunca esteve em funcionamento, é completamente nova e na embalagem original. Ângulo giratório 180 [] Binário 15 [Nm] Repetibilidade +/- 0.01 [] Tempo de pan 0.5 [s] Através do buraco 15 [mm] Carga de rolamento axial 2500 [N] Carga de rolamento radial 155 [Nm] Pressão operacional min. 3 [bar] Pressão máxima de funcionamento. 8 [bar] Temperatura de funcionamento 5 ... +80 [C] Volume de cilindro por ciclo 108 [cm³] Peso 6.3 [kg] 1 ...

Secador a jato de ar quente, Energia: Gás natural Estação de revestimento MAGNOROLL RMR-GMA/F/417 Chiller Rolo de manget suplente Tanques para mistura e armazenamento preliminares, conforme necessário Se necessário, poderá também ser oferecido um RTO, Energia: Gás Natural Para larguras de 2 m, até 40 m/min A central está no local e precisa de ser desmontada. A base para a negociação é o desmantelamento da recuperação de custos. Componentes individuais também podem ser vendidos.

cutting diameter: 185 mm saw band length: 2.085 x 20 x 0,90 mm table height: 915 mm band speed: 35/70 m/min capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150 mm capacity 90 degrees: flat: 220 x 150 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2450 x 27 x 0,9 mm table height: 915 mm band speed: 35 + 70 m/min connected load frequency: 400 V capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.  ...

Diâmetro de corte 220 mm Comprimento da lâmina da serra: 2450 x 27 x 0,9 mm Cor: cinzento Necessidade de potência total: 1,2 kW Largura de banda da serra: 0,9 mm Velocidade de corte: 35 + 70 m/min Faixa de corte a 90 graus: cerca de 220 mm Faixa de corte a 90 graus: quadrado 220 mm Área de corte a 90 graus: plana 230 x 185 mm Faixa de corte a 60 graus: quadrado 90 x 90 mm Faixa de corte a 45 graus: cerca de 150 mm Área de corte a 45 graus: quadrado 150 x 210 mm N.º da máquina 4777230

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 mm : 165 x 310 mm saw band length: 2.725 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1 kW weight of the machine ca.: 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: kW weight of the machine ca.: 0,35 t The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MÁQUINA DE CURA DE TECIDOS / EDGER MARCA : ZIMMER TIPO : THERMOCURE UHD 3 Ano : 2005 WW : 2000 milímetros CONTEÚDO: 240 m AQUECIMENTO: GÁS DE PETRÓLEO QUENTE COM CALDEIRA A ÓLEO TÉRMICO TEMPR : MÁX. 250 C