Centros de elaboración

x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 10000 U/minrapid traverse: 35 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 10000 U/minrapid traverse: 35 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 900 mmy-travel: 800 mmz-travel: 970 mmControl: Fanuc type: PRO-3 tool taper: HSK 100power capacity: 30 kWturning speeds: 12000 U/minrapid traverse: 50 m/minTool changer: 90 Pos.Cooling through the spindle: 70 barsize of pallet: 630x630 mmTable load: 1200 kgrotary table tiltable: 1 Gradtype of pallet-changer: 2 total power requirement: kWweight of the machine ca.: 20 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carrera X: 1000 mm Carrera Y: 1000 mm Carrera Z: 950 mmControl: FANUC Potencia total requerida: - - - kWpeso de la máquina aprox.: - - - tdimensiones de la máquina aprox.: - - - m

x-travel: 1300 mmy-travel: 600 mmz-travel: 800 mmcontrol: Heidenhain TNC 530 table dimensions: 1030 x 630 mmturning speed range: 10000 U/minpower capacity at 60% / 100 % load: 30 / 17 KWmax. torque at 40% / 100% load: 190 / 120 Nmfeeds x/y/z: 30 m/mintool taper: HSK A63 tool magacine with: 80 Plätzenrotary table diameter: 630 mm: 40 barslewability of milling head: +/- 105 °table load: 2,50 ttotal power requirement: - kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: - m2022 Spindle overhaul5-axis BAZ With:- HEIDENHAIN iTNC530 control- swivel head +/- 105- electronic handwheel,- NC rotary table integrated (dia. 630mm)- Coolant system, coolant through the spindle 40bar- paper belt filter- tool changer 80-fold (HSK A63)- direct measuring system in x,y,z- Tool breakage control & length measurement- Machine on: 000h Spindle run: 0hThe data for this ad was created with Mod ...

Matec 30 L, Año de construcción 2010, Control Heidenhain iTNC 530, recorrido X/Y/Z1300/600/700 mm, velocidad del husillo hasta 12.000 rpm, Grabación HSK 63 - A, Elketr. Volante IKZ 20 bar, filtros de cinta adhesiva de papel, Ww 80 veces, Cámara de trabajo de revestimiento completo, tú. Sistemas de medición, Transportador fuelles con lamas de acero, Sondas 3D, Dispositivo de medición láser,

x-travel: 2000 mmy-travel: 600 mmz-travel: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 840D80-fold automatic tool changerchip conveyorTechnische Daten / technical details:X-Weg / X-travel 2000 mmY-Weg / Y-travel 600 mmZ-Weg / Z-travel 700 mmSpindelaufnahme / spindle taper HSK 63A Drehzahlbereich / spindle speed 20-9000 UpM /rpmTischaufspannfläche / table clamping area 3000x420 mmWerkzeugwechselmagazinplätze / number of tool places in changer 80 Antriebsleistung Spindel 40%ED / drive capacity spindle 40%ED 15 kWGewicht ca. / weight 15000 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution o ...

x-travel: 600 mmy-travel: 410 mmz-travel: 470 mmwork height max.: 620 mmtable surface area: 600x380 mmnumbers of pallets: 2 turning speeds: 30-7000 U/minspindle diameter: 75 mmTool changer: 30 Control: Matsuura type: MX 3 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1500 mmy-travel: 650 mmz-travel: 650 mmsize of pallet: 1740 x 650 mmspindle taper: SK 50 spindle turning speed range: 25 - 6000 U/minfeeds longditudinal/cross/vertical: max. 8 mm/minrapid traverse longitudinal and cross: 26 m/minrapid traverse vertical: 20 m/minspindle throat: 665 mmdistance spindle nose and table: 200 / 850 mmdrilling in full material: 50 mmøthreading: M 45 ATC: 60 Postool diameter: 125 mmwotkpiece diameter with 2 vacant positions: 260 mmworkpiece length: 400 mmweight of tools max.: 20 kgspindle drive: 18,5 kWmax. torque on the spindle: max. 758 NmAccessories: chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAZAK MTV 414/22B en buen estado, Control: MAZATROL M-PLUS Características técnicas: Tamaño de la mesa: 900x410mm Carga de la mesa: 500 kg. Velocidad de desplazamiento rápida: Eje X: 26 m/min. Eje Y: 26 m/min. Eje Z: 20 m/min. Husillo: DIN 69871 Portaherramientas: SK40 Velocidad: 50 - 7.000 1/min. Herramientas: 22 Documentación disponible.

x-travel: 510 mmy-travel: 510 mmz-travel: 460 mmcontrol: Mazatrol Fusion 640M Main spindle:: Max. rpm: 12.000 min/-1power capacity - main spindel: 22 / 15 kWtool taper: ISO 40 Spindle diameter: 80 mmAccelaration: 0 - 12.000 min/-1 : 1,7 sectable surface area: 500 x 400 mmT-slots: 5 x 18 mmT-slot - distance: 80 mmdistance spindle /table: 190 - 650 mmmax. workpiece height: 500 x 500 x 405 mmmax. table load: 300 kgSwivel range A-Axis: +30 / -120 °rotation range c-axis: +/- 360 °Tool-Presetter:: number of toolpositions: 40 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 300 mmmax. tool weight: 8 kgchange-time chip to chip: 4,5 secfeeds:: feed speeds: X/Y/Z: 1 - 50.000 mm/minrapid traverse: X/Y/Z: 50 m/minIndexing: A + C: 0,001 °switching time: 90°: A/C: 1,9 / 1,5 sectotal power requirement: 51 kVAweight of the machine ca.: 7,5 tdimensions of t ...

x-travel: 700 mmy-travel: 715 mmz-travel: 850 mmControl: FANUC 16i-MB table-size: 500 x 500 mmtable weight: 500 Kga-axis: +45 / -135 °c-axis: 360 °distance table / middle of spindle: - mmnumber of spindle speeds: 10000 U/min/rpmtool taper: ISO 40 spindle drive: 18,5 / 22 kWrapid travel x/y/z: 70 m/minTools changer: - pos.dimension of workpiece: dia 725 mmtotal power requirement: - kVAweight of the machine ca.: 21 tdimensions of the machine ca.: mThe machines of the Clock series can also be used as 5-axis multitasking machines.The Clock series is characterized by high speed and precision.paired with a very stable machine concept. Thanks to the fasttool change and pallet exchange, the machines achieve a very highproductivity. As 5-axis version the Clock 700 is equipped with a very stableSwivel table equipped. The swivel table is double on the axesand thus guarantees the optimal absorpti ...

: 1050 mm: 600 mm: 600 mm: 1200x600 mm: ISO 40 : 12.000 U/minMotor Capacity: 7,0/10,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0760 mm: 440 mm: 460 mm: 900x410 mm: ISO 40 : 12.000 U/minMotor Capacity: 7,0/10,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0760 mm: 440 mm: 460 mm: 900x410 mm: ISO 40 : 12.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain iTNC530NC swivel-rotary table (B-axis and C-axis)pallet changing device UPS 320mm x 320mm30-fold automatic tool changerelectronical hand wheelcoolant through spindle device (IKZ)chip conveyorcoolant deviceTechnische Daten / technical details:Verfahrweg X / X-Travel 600 mmVerfahrweg Y / Y-Travel 450 mmVerfahrweg Z / Z-Travel 450 mmB-Achse Schwenktisch / B-axis swivel table -115 / +30 °C-Achse Rundtisch / C-axis rotary table 360 °Tischgröße / table size 320 x 320 mmWerkzeugschaft / spindle taper HSK 63 Drehzahlbereich / spindle speed 100-20000 UpM /rpmWerkzeugwechsler / tool changer 30 fach /foldGewicht der Maschine ca. / weight ca. 9000 kgTechnische Daten, Zubehör  ...

x-travel: 900 mm y-travel: 630 mm z-travel: 500 mmcontrol: Heidenhain potencia total requerida: kWpeso de la máquina ca.: tdimensiones de la máquina ca.: m

Fabricante: MIKRON Tipo VCE 1000 Pro Año de construcción 2002 Control Heidenhain TNC 426 Peso de la máquina aprox. 5 t. Portaherramientas SK 40 Velocidades del husillo 14.000 rpm Carrera X 1015 mm Carrera en Y 508 mm Carrera en Z 675 mm Carga máxima de la mesa 1000 kg Espacio requerido aprox. 2,86 x 2,60 x 2,70 m Número de herramientas en el cargador 24 Pos.

x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmworking length X: mmworking length Y: mmworking depth Z: mmWorkpiece dimensions: mmWorkingpiece thickness from to: mmMotor output: kWNumber of axles: St.Number of milling agregates: St.Number of heads vertical: St.Number of heads horizontal: St.Overall size: mmWeight: kgYear: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 560 mmz-travel: 650 mmtable surface area: 400 x 400 mmcontrol: Fanuc 18i-M spindle turning speed range: 120-12000 U/min: ja/yes hand wheeltype of pallet-changer: 2 Cooling through the spindle: 10 barchip conveyor: ja/yes feed: 670 mm/mindistance work spindle /surface of the table: 800 mmtable load: 400 kgtoolpiece magazine: chain magazine: 60 BT 40b-axis: 360 1°rapid traverse:: 40 m/minfeed: 1-40.000 mm/mintool changing time: 1,3 sec tool/tooltool changing time: 3,8 sec chip/chiptotal power requirement: 22,4 kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: 5 x 3,3 x 3 m (LBH)Machining centre - Horizontal Mitsubishi M-H4B, year of construction 1998,good ondition, regularly maintained.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel -x axis: 1.400 mmtravel -y axis: 1.200 mmtravel -z axis: 1.350 mmcontrol: FANUC - MSX-701III numbers of positions in the tool changer: 60 tool taper: HSK 100 max. Spindle speed: 8.000 U/min.max. tool length: 800 mmmax. tool weight: 30 kgMilling machining centers - horizontal | MORI SEIKI - NH8000 DCGequipped with additional 4th axis.Equipment:- B-axis (rotary table): 360,000 X 0.0001,- 2-fold pallet changing system,- Pallet dimensions 800 mm x 800 mm,The machine is in a well-maintained conditionwith approx. 30.000 (h) Power-On hours.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MORI-SEIKI | NH 8000 | NH8000DCG | NH-8000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 500 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Mitsubishi M70pallet changing device4. axis (dividing head)24-fold automatic tool changercoolant through spindle devicechip conveyorTechnische Daten / technical details:X-Weg / X-travel 600 mmY-Weg / Y-travel 400 mmZ-Weg / Z-travel 500 mmSpindelaufnahme / spindle taper SK40 Drehzahl / spindle speed 12000 UpM /rpmTischaufspannfläche / table clamping area 2x 700x400 mmWerkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel / drive capacity spindle 7,5 kWGewicht ca. / weight 6600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.The data  ...

x-travel: 2120 mmy-travel: 1000 mmz-travel: 850 mmControl: Fanuc table surface area: 3600x1300 mmdividing head: CNC Tool changer: 60 Postotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centro de mecanizado ertikal, utilizado, desde la ubicación centro de mecanizado vertical, utilizado, Modelo/modelo: VS 500 SPEED Fabr./ hacer: NORTE Año construido/año: 1999 Control/control: SIEMENS 840D x-Way /x-travel 2000 mm y-way / y-travel 500 mm z-way / z-travel 500 mm Alimentación: 1 - 8000 mm/min Tamaño de la mesa / tamaño de mesa 2120 x 550 mm Carga de mesa / carga de mesa 2000 kp Engranaje rápido Eje X / giro rápido Eje X 40 m/min Engranaje rápido Eje Z/ giro rápido Eje Z 20 m/min Portaherramientas / cono de herramienta HSK 63 A Velocidades del husillo - infinitamente variables/ velocidad de giro del husillo 0 - 15000 rpm Motor de husillo/husillo 20 kW Diámetro del cojinete del husillo / diámetro del cojinete del husillo. 70 mm Precisión de posición / precisión de posición: 0.020 mm Contro ...

x-travel: 560 mm y-travel: 610 mm z-travel: 560 mmcontrol: OSP Potencia total requerida: kWpeso de la máquina ca.: tdimensiones de la máquina ca.: m

x-travel: 1040 mmy-travel: 508 mmz-travel: 560 mmControl: Okuma type: OS 5020 M Table load: 1000 kgspindle taper ISO: 50 turning speeds: 5000 U/mintable surface area: 508X1300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Posmill C 1050 Año de construcción : 2014 Control : Heidenhain iTNC 530 Centro de mecanizado vertical Eje X : 1050 mm Eje Y : 530 mm Eje Z : 630 mm Tamaño de la mesa : 1150 x 560 mm Velocidad del husillo : 10.000 rpm Cambiador de herramientas : 30 veces Portaherramientas : SK 40 Horas de máquina aprox. : 27.000 h Horas de husillo aprox. : 9.800 h IKZ 20 bar con sistema de filtro de banda Robot Yaskawa Motoman, control MH 12/DX 200 Sistema de medición de piezas 25.10-HDR Volante electrónico

Carrera X: 710 mm Carrera Y: 610 mm Carrera Z: 610 mmControl: Fanuc Potencia total requerida: kWPeso de la máquina aprox.: 11500 kgDimensiones de la máquina aprox.: M

Controlador automático Controlado por PC Accionamiento principal Rango de velocidad del husillo 18000 Este centro de mecanizado universal RAPID MFC EVOLUTION II fue fabricado en el año 2009. Está equipado con una unidad de control controlada por ordenador. La velocidad del husillo es de 18.000 rpm.

x-travel: 1050 mmy-travel: 560 mmz-travel: 520 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mHeidenhain iTNC530 CNC controlwith 4. Axis (NC-dividing head)electronical handwheel24-fold tool changercoolant devicechip conveyorTechnische Daten / technical details:X-Weg / X-travel 1050 mmY-Weg / Y-travel 560 mmZ-Weg / Z-travel 520 mmSpindelaufnahme / spindle taper HSK 63A Drehzahl / spindle speed 10000 UpM /rpmTischaufspannfläche / table clamping area 1250x515 mmWerkzeugwechselmagazinplätze / number of tool places in changer 24 Eilgang X,Y,Z / rapid feed X,Y,Z 30/30/20 m/minAntriebsleistung Spindel / drive capacity spindle 16 kWGewicht ca. / weight ca. 4900 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the  ...

Carrera X: 1200 mmCarrera Y: 600 mmCarrera Z: 700 mmControl: HEIDENHAIN TNC 426 M Velocidades de giro: 20-6300 U/minCarga de la mesa: 800 kg: 1200x630 mmCono de la herramienta: SK40 : 4 Altura de la máquina: 2950 mmPeso de la máquina aprox.: 8800 kg

x-travel: 1200 mmy-travel: 600 mmz-travel: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- milling head/spindle retrofit in the year 2022 for 28.000 Euro- CNC control Heidenhain iTNC530- NC swivable milling head: B-axis full NC-axis A-axis horizontal/vertical- NC-rotary table (C-axis)- tool changer for 72 tools- chip conveyor- electronical hand wheel- coolant device (coolant through spindle device 20bar)Technische Daten / technical details:Verfahrweg X längs / X-Travel longitudinal 1200 mmVerfahrweg Y quer / Y-Travel cross 600 mmVerfahrweg Z vertikal / Z-Travel vertical 700 mmC-Achse Rundtisch / C-axis rotary table 360 °B-Achse / B-axis +-90 °Rundtischgröße / rotary table size 800 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 0-6300 UpM /rpmAnzahl der Werkz ...

x-travel: 1200 mmy-travel: 600 mmz-travel: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- CNC control Heidenhain TNC426- swivable milling head (horizontal / vertical)- NC-rotary table (C-axis)- tool changer for 32 tools- chip conveyor- electronical hand wheel- coolant device (coolant through spindle device 20bar)Technische Daten / technical details:Verfahrweg X längs / X-Travel longitudinal 1200 mmVerfahrweg Y quer / Y-Travel cross 600 mmVerfahrweg Z vertikal / Z-Travel vertical 700 mmC-Achse Rundtisch / C-axis rotary table 360 °Fräskopf / milling head +-90 °Rundtischgröße / rotary table size 800 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich 2-stufig / spindle speed (2-steps) 20-6300 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 32 fachAntriebsleistung Spindel  ...

x-travel: 440 mmy-travel: 290 mmz-travel: 270 mmControl: Fanuc 21i-MB spindle turning speed range: 12000 U/mintool piece magazine with: 10 table-size: 500 x 320 mmdistance table - lower edge spindle: 180 - 450 mmboring range:: dia 22 -26 thread: M 14 - M 20 workpiece weight max.: 150 kgspindle drive: 5,5 / 7,5 kWtotal power requirement: 12,5 KVAweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,2 x 2,2 x 2,3 mequipped with:- CNC control FANUC 21i-MB- tool changer 10-fold (Iso 30)- Internal coolant supply- coolant tank- chip box2 machines available, 2nd machine without IKZ!- 1 Set of Tools for each machine- Working Hours: 16.000h Control OnThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Núm. Inv. : 7256 Tipo: RFM 600/2 Productor: Röders TEC Creado: 2000 Parámetros: Longitud de la mesa de trabajo: 700 mm Ancho de la mesa de trabajo: 550 mm Recorrido del eje X: 600 mm Recorrido del eje Y: 450 mm Recorrido del eje Z: 300 mm

x-travel: 3800 mmy-travel: 2000 mmz-travel: 670 mmControl: Siemens type: 840 D slsurface area: 3000x1800 mmmilling spindle: 120 KWturning speeds: 30.000 U/mintool holder: HSK 63 Tool changer: 124 Posc-axis: angular milling head: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General: Año de construcción: 2004 Recorrido: X 420 mm, Y 350 mm, Z: 200 mm Velocidad del husillo 6,000 – 40,000 rpm Cambiador de herramientas 16 veces Portaherramientas HSK-E25 Peso 5.800 kg Otros equipos y accesorios incluidos: Sistema automático de medición de longitud de herramienta Blum Extracción de neblina de aceite Máquina retráctil de herramientas Varios portaherramientas

Zona de sujeción de la mesa: 600 x 1300 mm Recorrido x/y/z: 810/580/560 mm Soporte de husillo: SK 40 ISA Velocidades del husillo: 8000 rpm Número de espacios de herramientas: 40 piezas Alimentación: 24000 mm/min Accionamiento del husillo: 25 kW electr. Conexión: 380/400 V kW Requisito de espacio: 3200 x 2500 x 2900 mm Peso: 9000 kg Control: SIEMENS 810 ES

Fabricante: SPINNER Tipo U5-630 Año de construcción 2018 Control Heidenhain iTNC 630 Portaherramientas SK40 Recorrido X 630mm Carrera en Y 530 mm Recorrido en Z 465 mm Rango de velocidad 15.000 1 rpm Carga máx. de la mesa 500 kg Tamaño de la mesa Ø 500 mm Número de herramientas en el almacén 54 pl. Suministro de refrigerante interno 70 bar Sonda 3D sí 5 ejes simultáneamente

x-travel: 650 mmy-travel: 500 mmz-travel: 530 mmtable surface area: 800 x 500 mmcontrol: FANUC 21 iMB control: mit FANUC MANUAL GUIDE spindle turning speed range: 60 - 8000 U/minspindle taper: SK 40 spindle taper: DIN 69871 A table load: max. 500 kgrapid traverse X/Y/Z axis: 30 m/minATC: 30 Posworkpiece diameter at full load: 80 mmtool diameter if 2 vacant positions: 120 mmtool length - max.: 250 mmweight of tools max.: 7 kgtotal power requirement: 30 kVAweight of the machine ca.: 4,5 tdimensions of machine L x W x H: 2,4 x 2,2 x 2,46 mAccessories: NC-dividing unit with tailstock MECA-DIVIMEK (Spain), DCH 160 C, 2 machine vices, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mmy-travel: 650 mmz-travel: 650 mmcontrol: Siemens 840 D tool taper: SK 40 spindle turning speed - stepless: 10000 U/minpower capacity at 100 % load: 19 kWfeed X/Y/Z-axis: 82000 mm/minrapid traverse X/Y/Z: 40 m/minfeed force X/Y/Z axis: 12 / 14.000 NB-axis: 360 x 1 °table rotation speed: 25,00 U/mintable load: 300 kgsize of pallet: 400 x 500 mmtotal power requirement: 75 kVAweight of the machine ca.: 12,5 tdimensions of the machine ca.: 8,8 x 4,6 x 3 mHorizontal machining center with:- SIEMENS SINUMERIK 840D control system- 8-fold pallet changer (400x500mm)- coolant system with paper belt filter - IKZ- chip conveyor- cooling unit- B-axis 360 x 1°- tool magazine 240-fold (SK 40)- tool breakage controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 900 mmy-travel: 770 mmz-travel: 1000 mmControl: Siemens 840 D tool taper: SK 50 spindle turning speed range: 20 - 6000 U/minrapid travel x/y/z: 60 m/minMotor power: (60% ED) 30 kWmax. torque on the spindle: (60% ED) 1080 Nmpallet size:: 500 x 500 mmtotal power requirement: kWweight of the machine ca.: 21,0 tdimensions of the machine ca.: m- CNC-control SIEMENS 840 D- portable handwheel- 2-station pallet changer- autom. horizontal-vertical milling head- 60-station ATC- coolant equipment with paper band filter- coolant thru spindle 80 bar- oil cooler- NC-rotary table 360 deg.- Chip conveyorInterference circle diameter 1150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centro de mecanizado de doble husillo con eje giratorio Un lado 5.ejes con puente giratorio y mesas giratorias. Un lado 4º eje, sin puente giratorio, 5º eje preparado. Área de trabajo Eje X 400 mm Eje Y (posición de cambio de herramienta) 450 (700) mm Eje Z 400 mm Viga/contracojinete giratorio con dentado frontal ----- Número de husillos 2 Espaciado entre husillos 400 mm Velocidades del husillo de hasta 17.500 rpm Potencia 40/ 100% ED 25/ 18 KW ----- Avance/recorrido rápido 50.000 mm/min Almacén de herramientas 2 x 60 ranuras para herramientas Portaherramientas HSK 63 Equipo: - Ampliación del almacén de herramientas a 2 x 60 posiciones de herramienta por husillo - Distribuidor de aceite para mesa giratoria NC - 5.Eje para un lado - Extensión de la hidráulica de la máquina - Aumento de la presión de sujeción a 250 bar - Conexión al sistema central ...

General: Año de construcción 2013 Control Fanuc Serie 0i-MD Recorrido X 703 mm Y 603 mm Z 503 mm Husillo de trabajo 12.000 rpm Cambiador de herramientas 40 veces Portaherramientas DIN40 Características técnicas: Mesa giratoria +31.1° / -121.7° Mesa giratoria 360° Otros equipos y accesorios incluidos: Preparación de la sonda 3D

Centro de mecanizado Vertical Speed 1110 Fabricante: TRIMILL BJ: 2010 Controlar Heidenhain ... TNC 530 Zona de la mesa de sujeción... 1300x1200mm Eje X ... 1100mm Eje Y ... 1000mm Eje Z ... 700mm Velocidad del husillo ... 30-14000 rpm. ejes controlados... 3 HSK A80 Demanda total de energía ... 56kVA Peso de la máquina... 14500kg apuro.. 20m/min L x An x H ... 4400x5500x3810mm Sonda de pieza heidenhain TS740 Lugares de revistas 10 Refrigeración del husillo solo con aire nuevo husillo 2017 La máquina está en buenas condiciones, posible probar bajo potencia.

Centro de mecanizado CNC vertical POS del fabricante Tipo PosMill 1100 Año de construcción 2008 Control Heidenhain iTNC530 aprox. 18.700 horas de husillo Recorrido X/Y/Z 1100/600/400mm 10.000 rpm Cambiador de herramientas de 40 pliegues IKZ La máquina está en muy buenas condiciones

Se vende una mandrinadora de banco Union BFT 110 La mandrinadora de banco se puede comprar inmediatamente y luego recoger. Los datos técnicos se pueden encontrar en el historial, si tiene alguna pregunta, no dude en ponerse en contacto con nosotros Sr. Jan Sadau 02683 309 204 jsadaustuertz.com Carrera X: 1985 mm Carrera Y: 1620 mm Carrera Z: 1960 mm Control para el programa Heidehain TNC 155: Portaherramientas: SK 50 Diámetro del husillo: 110 mm Tamaño de la mesa: 1600 x 1400 mm Rotación de la mesa: > 360 grados Posicionamiento de la mesa 4 x 90 grados Peso: 6,3 t Peso de la máquina: aprox. 25,4 t

x-travel: 1500 mmy-travel: 500 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: 19 tdimensions of the machine ca.: 6x3,45x3,15 mBrand: UnisignType: Uniport 4CNC brand: SiemensCNC model: SinumerikYear of make: 2005Table length: 2.200 mmTable width: 1.500 mmNumber of pallets: 2X: 1.500 mmY: 500 mmZ: 400 mmMachine dimensions: 6.000 x 3.450 x 3.150 mmMachine weight: 19.000 kg5 AxisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 4000 mm  Y-axis travel: 800 mm  Z-axis travel: 600 mmSPINDLE / HEAD  spindle revolutions (min): 10 /min  spindle revolutions (max): 6000 /min  tool fixture: ISO SK 50   drive power: 26 kWTOOL MAGAZINE  number of positions: 128 ELECTRICAL SPECIFICATIONS  mains power supply: 83 kVA  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 9500 mm  total height: 4500 mm  total weight approx.: 25000 kgATTACHMENTS  angular milling head: yes   central lubrication system: yes   chip conveyor: yes   coolant unit: yes   th ...

Centro de Mecanizado Vertical Marca: Vision Wide VTEC Tipo: SF 3120 CNC Año de construcción: 2014 Técnicas: Eje X: 3100 mm Ejes Y: 2000 mm Ejes Z: 800 mm Tamaño de la mesa: 3000 x 1800 mm Velocidad 10.000 rpm. Horas de funcionamiento 17.500 h