Prensas excéntricas de un montante

pressure: 50 tthroat: 245 mmstroke: 14 / 90 mmram adjustment: 75 mmtable height adjustment: 150 mmstrokes per minute: 42/85 table surface area: 700 x 490 mmram surface: 400 x 230 mmtool hole in ram: 40 mmtotal power requirement: 4 kWweight of the machine ca.: 3,41 tdimensions of the machine ca.: 0,8 x 1,75 x 2,1 mMachine is partially overhauled in our house as follows:- Cleaning and inspection- new control cabinet with safety control and touchscreen display- new 2-hand control panel- Current UVV test with braking time measurement- Machine safe for hand inlay workThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 260 mmstroke: 20-100 mmno. of strokes: 60 Hub/minram - range of adjustment: 70 mmram surface: 330x300 mmtable surface area: 750x550 mmmax. distance table - ram: 525 mmhole in the table: 300x175 mmtotal power requirement: 5.5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 tthroat: 200 mmstroke: 10-80 mmram - range of adjustment: 60 mmno. of strokes: 120 Hub/mintable surface area: 600x450 mmram surface: 290x230 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 3,5 tdimensions of the machine ca.: BxTxH 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tthroat: 290 mmstroke: 20-124 mmno. of strokes: 60 / 90 Hub/minram adjustment: 85 mmtable surface area: ca. 920 x 590 mmram surface: ca. 530 x 280 mmdistance table to upper part of the press: ca. 450 mmhole in the table: ca. 180 x 300 mm mmtable height: ca. 750 mmtool hole in ram: Ø 50 mmNumber of working hours: 8214 hdistance table to upper part of the press: mmweight of the machine ca.: 5,5 tdimensions: ca. 2000 x 2000 x 2600 mmoverhauled by the manufacturer Helmerding in 2014 including conversion to new onespress safety control.Operating hours read since overhaul in 2014: 8214Documentation of press safety control availableelectrical grease central lubricationHydraulic clutch-brake combinationMechanical break plate in the ramtwo-hand operationfoot controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 tthroat: 260 mmstroke: 16-80 mmtable surface area: 800 x 520 mmdistance table/ram: 350 mmstrokes - infinitely variable: 50 - 250 Hub/minram surface: 400 x 300 mmram adjustment: 70 mmtotal power requirement: 7,5 kWdimensions of the machine ca.: 2,7 x 1,7 x 2,6 mweight of the machine ca.: 4 thole in the table: 260 x 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión del émbolo 4 t Tasa de brazada 70 / min

pressure: 100 tthroat: 330 mmstroke: 10-130 mmno. of strokes: 56 Hub/minram - range of adjustment: 80 mmtable surface area: 830x600 mmram surface: 250x130 mmtable height: 870 mmtool hole in ram: 50 mmweight of the machine ca.: 11 tdimensions of the machine ca.: BxTxH 2100x1900x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 12 tgarganta: mm carrera: 6 - 60 mm superficie de la mesa: 400 x 275 mm agujero en la mesa: 120 x 150 mm agujero de ariete: 30 mmpotencia total requerida: kWpeso de la máquina aprox.: 500 kgdimensiones de la máquina aprox.: 1,0 x 1,0 x 1,8 m

pressure: 15 tthroat: 180 mmstroke: 6 - 60 mmno. of strokes: 145 Hub/minram adjustment: 40 mmtable surface area: 400 x 270 mmhole in the table: 100 mmram surface: 120 x 100 mmdayligth: 250 mmtotal power requirement: 1,1 kWweight of the machine ca.: 1150 kgdimensions of the machine ca.: 0,96 x 1,34 x 1,88 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 260 mmstroke: 10-100 mmram adjustment: 80 mmtable surface area: 700x500 mmram surface: 450x300 mmtable-regulation: 400 mmcoil: Schwabe GSW type: MHM 2 total power requirement: kWweight of the machine ca.: 6,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oferta 24163 Datos técnicos aprox.: - Fuerza de compresión 135 t - Proyección 350 mm - Tamaño de la mesa aprox. 1000 x 680 mm - Orificio pasante en la mesa mm - Altura máxima de instalación aprox. 460 milímetros - Área del émbolo 350 x 280 mm - con voladizo lateral, izquierda + derecha, 125 x 200 mm - Orificio de espiga en el ariete de 50 mm - Ajuste del émbolo 65 mm - Ajuste de carrera 20 - 180 mm - Frecuencia de carrera aprox. 50 /min - Blindaje móvil, reacondicionado en 1991 - Pneum. Acoplamiento de cuña giratoria accionado - Accionamiento 400 V / 7,5 kW - Necesidad de espacio aprox. 1500 x 2550 x 1800 mm - Peso aprox. 9000 kg

pressure: 80 tthroat: 280 mmstroke: 10-100 mmno. of strokes: 85 Hub/minram - range of adjustment: 60 mmtable surface area: 820x530 mmram surface: 260x210 mmhole in the table: Ø 120 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5 tdimensions of the machine ca.: BxTxH 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 45 tthroat: 230 mmstroke: 4 - 80 mmstrokes per minute: 120 table surface area: 690 x 460 mmram surface: 360 x 185 mmram adjustment: 55 mmdaylight, max. stroke above - ram adjustment above: 340 mmtotal power requirement: 3 kWweight of the machine ca.: 2,95 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: 285 mmstroke: 10-100 mmno. of strokes: 65 Hub/minram - range of adjustment: 60 mmtable surface area: 850x640 mmram surface: 420x210 mmtable height: 800 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,2 tdimensions of the machine ca.: BxTxH 2500x2500x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 tthroat: 290 mmstroke: 12 - 100 mmram adjustment: 80 mmno. of strokes: 140 Hub/mintable surface area: 830 x 560 mmram surface: 630 x 300 mmtotal power requirement: kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: 400 mmstroke: 8 - 112 mmno. of strokes: 120 Hub/minram adjustment: 70 mmdayligth: 412 mmtable surface area: 850 x 600 mmram surface: 640 x 400 mmcolumn daylight: (hinten) 680 mmtotal power requirement: 11 kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: B 1,3 x T 1,9 x H 3,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tthroat: 180 mmstroke: 10 - 75 mmno. of strokes: 125 Hub/mindayligth: 225 mmdistance table - lower edge of ram: 300 mmram adjustment: 50 mmtable-size: 360 x 560 mmram head dimension: 260 x 340 mmwork height max.: 670 mmtable hole: 140 mmram hole: 35 mmtotal power requirement: 2,2 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 1,1 x 1,3 x 2,0 mThis eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming.Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance P ...

Raskin Master 50 tonCapacity: 50 ton Deph of throat: 240 mm Max adjustable stroke: 10 > 80 mm Distance between table -- ram: 360 mm Table area: 650 x 500 mm Electric motor (power): 5,5 HP Weight: 2350 kg

pressure: 65 tthroat: 370 mmstroke: 29-151 mmno. of strokes: 50 Hub/minram - range of adjustment: 80 mmtable surface area: 1300x700 mmram surface: 1000x600 mmhole in the table: ¦ 110 mmtable height: 800 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 6 tdimensions of the machine ca.: BxTxH 1700x2000x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 370 mmstroke: 10 - 140 mmno. of strokes: 58 Hub/minram adjustment: 80 mmtable surface area: 900 x 670 mmram surface: 410 x 430 mmtable height: 760 mmtool hole in ram: 65 mmtoolpiece height max.: 450 mmweight of the machine ca.: 6 tpneumatic clutch-brake combinationMechanical fracture plate in the ramTwo-hand operationFoot controlUVV until 03/2023The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 tthroat: 155 mmstroke: 6-60 mmno. of strokes: 84-210 Hub/minram - range of adjustment: 50 mm: 300 mmtable surface area: 300x450 mmtable height: 840 mmhole in the table: Ø 90 mmram surface: 190x278 mmtool hole in ram: Ø 25 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: BxTxH 1100x1100x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 tthroat: 155 mmstroke: 6-60 mmno. of strokes: 84-210 Hub/minram - range of adjustment: 50 mm: 300 mmtable surface area: 300x450 mmtable height: 840 mmhole in the table: Ø 90 mmram surface: 190x278 mmtool hole in ram: Ø 25 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: BxTxH 1100x1100x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tthroat: 180 mmstroke: 8-76 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 60 mmtable surface area: 360x580 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: BxTxH 1350x1200x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tthroat: 180 mmstroke: 8-76 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 60 mmtable surface area: 360x580 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: BxTxH 1350x1200x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tthroat: 195 mmstroke: 8-78 mmno. of strokes: 76-190 Hub/minram - range of adjustment: 60 mmtable surface area: 650x380 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 2,2 tdimensions of the machine ca.: BxTxH 1450x1220x2110 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 tthroat: 230 mmstroke: 12-110 mmno. of strokes: 40-100 Hub/minram - range of adjustment: 70 mmtable surface area: 740x440 mmtable height: 840 mmhole in the table: Ø 140 mmram surface: 460x300 mmtool hole in ram: Ø 45 mmtotal power requirement: 4 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: BxTxH 1500x2500x2510 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: 295 mmstroke: 14-150 mmno. of strokes: 34-85 Hub/minram - range of adjustment: 85 mmtable surface area: 900x580 mmtable height: 850 mmhole in the table: Ø180 mmram surface: 560x380 mmtool hole in ram: Ø 50 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5,6 tdimensions of the machine ca.: BxTxH 1800x1850x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: - mmstroke: 50 mmtable surface area: 875 x 695 mmram surface: 350 x 355 mmram adjustment: 71 mmno. of strokes: 30 - 90 Hub/mindistance between columns: 450 mmweight of the machine ca.: 6,2 tdimensions of the machine ca.: 2,0 x 2,1 x 3,2 mdaylight (stroke down, ram adjustment above): 480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 440 mmstroke: 8-100 mmno. of strokes: 65 Hub/minram - range of adjustment: 63 mmtable surface area: 720x750 mmram surface: 440x280 mmhole in the table: Ø 240 mmtable height: 830 mmtool hole in ram: Ø 40 mmweight of the machine ca.: ca. 5,0 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

muy rápido Prensa excéntrica, hacer SCHULER, probado, conectado eléctricamente Tipo PDv 25/200 Masch.-No. 70/32.0610/9 Datos técnicos: Potencia 25 a Número de golpes aprox. 180 /min Extensión 200 mm Carrera de impacto 8 - 80 mm Creación de tamiz de choque aprox. 60 mm Tamaño de la mesa aprox. 570 x 410 mm Altura de instalación aprox. 310 mm (medido con placa de sujeción montada) Ancho x Profundidad aprox. 1,1 x 1,35 m más armario de control Altura aprox. 2,15 m Potencia del motor 3 kW Peso estimado aprox. 1.5 a

Fuerza de compresión: 63 t Proyección: 250 mm Tamaño de la mesa: 500 x 710 mm Orificio para diarrea en la mesa: aprox. 250 mm Área del émbolo: 280 x 450 mm Ajuste del émbolo: aprox. 63 mm Ajuste de carrera: aprox. 8 - 100 mm Velocidad de carrera: aprox. 140 rpm Motor de accionamiento: 380 V, aprox. 5 kW Dimensiones: 1600 x 1500 x 2500 mm Peso: aprox. 3500 kg

presión: 40 ttiro: - mm carrera: 8 - 90 mmtamaño de la mesa: 630 x 430 mmram ajuste: 60 mmno. de carreras: máx. 65 Buje/mincargo de potencia total: kWpeso de la máquina ca.: 2480 kgdimensiones de la máquina ca.: m- inclinable- placa de montaje de mesa - mecánica. Protección contra sobrecarga en embrague de émbolo (placa de rotura) - pneum

presión: 160 ttiro: 400 mm carrera: 20 - 160 mm superficie tabla: 1200 x 800 mmram ajuste: 100 mmno. de trazos: 60 Superficie de buje/minram: 860 x 520 mmequier de potencia total: 15 kWpeso de la máquina ca.: 16 tdimensiones de la máquina ca.: 1,7 x 2,5 x 3,23 mLa máquina debe ser parcialmente revisadapintura nuevanuevos sellos

Fuerza nominal 400 kN Tasa de carrera - 70/140 / min Motor 3/4 kW Trazo explotable - en constante. Temperatura del freno del embrague 50/45/min Capacidad - espesor del material 4-6.4 m - con carreras simples, 2-3.2 mm - con carrera continua Mesa 660 x 530 mm, tablero de mesa 650 x 515 x 75 mm Ajuste de carrera - 10-125 mm, Dimensiones 1250 x 1600 x 2370 mm - Alto , Btto 4500 kg Máquina reacondicionada - garantía 9 meses a partir de la fecha de entrega

Thomas 10 tonCapacity: 10 ton Deph of throat: 250 mm Table area: 285 x 240 mm

pressure: 63 tthroat: 280 mmstroke: 8-100 mmno. of strokes: 56/84 Hub/minram - range of adjustment: 63 mmtable surface area: 620x500 mmram surface: 310x260 mmhole in the table: Ø 250 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1200x1900x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presión: 80 ttiro: 400 mm carrera: 8-112 mmram ajuste: 80 mmno. número de carreras: 52/78 Superficie del eje/mintabla de superficie: 750x550 mmram superficie: 400x300 mmcargo de potencia total: kWpeso de la máquina ca.: tdimensiones de la máquina ca.: m

pressure: 200 tthroat: 440 mmstroke: 20 - 180 mmtable surface area: 1200 x 800 mmhole in the table: 450 mmram adjustment: 110 mmtool shank hole (depth x diameter): 65 x 110 mmdistance table/ram: 400 mmdist. between columns - front to rear: 800 mmtotal power requirement: 15 kWdimensions of the machine ca.: 1,82 x 2,4 x 3,72 mweight of the machine ca.: 15,6 tram surface: 750 x 520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: - mmstroke: 8 - 112 mmtable surface area: 830 x 550 mmno. of strokes: 30 - 85 Hub/minram surface: 630 x 400 mmram adjustment: 71 mmclamping plate: 990 x 550 mmtable height over floor: 810 mmtotal power requirement: 10 kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: 1,5 x 2,2 x 3,15 mEquipment:- with wheel presentation- fixed table- with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mmSelling price applies without inspection and without a test run.The machine should be partially overhauled in our house (at an additional cost)- Complete disassembly and review- livery- new control cabinet with PLC and touchscreen including cabling.Price of the machine in partially overhauled condition: € 44,000.00Delivery time for the partially overhauled machines: by agreementThe data for this ad was created with ModulMWS - the software solution of Logo ...

Presión: 100 t Garganta: 415 mm Carrera: 8-140 mm Nº de carreras: 48 Hub/min ram - Rango de ajuste: 80 mm Área de superficie de la mesa: 920x670 mm Superficie del RAM: 700x450 mm Altura de la mesa: 800 mm orificio de la herramienta en el ariete: 50 mm Peso de la máquina aprox.: 8 tDimensiones de la máquina aprox.: BxTxH 1500x2000x2800 mm

pressure: 160 tthroat: 440 mmstroke: 20 - 120 mmtable surface area: 1050 x 750 mmno. of strokes: 42 u. 62 Hub/minram surface: 800 x 500 mmtool shank hole (depth x diameter): 85 x 50 mmhole in the table: 355 mmweight of the machine ca.: 11,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 320 mmstroke: 8-100 mmno. of strokes: 120 Hub/minram - range of adjustment: 63 mmtable surface area: 860x620 mmram surface: 540x360 mmhole in the table: Ø 270 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 1500x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presión: 25 ttiro: 220 mm carrera: 8-80 mmdía: 355 mmno. número de carreras: 140 Ajuste de buje/minram: 50 mm superficie de ram: 220x180 mmtienda de superficie estable: 160 mm agujero en la tabla: 90 mmrequisito de potencia total: 7,5 kWpeso de la máquina aprox.: 2 t

pressure: 25 tthroat: 220 mmstroke: 8-80 mmno. of strokes: 140 Hub/minram - range of adjustment: 50 mmtable surface area: 500x410 mmram surface: 230x170 mmhole in the table: Ø 150 mmtool hole in ram: Ø 35 mmtable height: 900 mmweight of the machine ca.: 3 tdimensions of the machine ca.: BxTxH 1500x1500x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 320 mmstroke: 8-100 mmno. of strokes: 120 Hub/minram - range of adjustment: 63 mmtable surface area: 730x600 mmram surface: 540x360 mmtable height: 850 mmtool hole in ram: Ø40 mmweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 2000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 tthroat: 170 mmstroke: 6-60 mmno. of strokes: 160 Hub/minram - range of adjustment: 40 mmtable surface area: 420x320 mmram surface: 180x140 mmhole in the table: Ø 120 mmtable height: 850 mmtool hole in ram: Ø 32 mmweight of the machine ca.: 1 tdimensions of the machine ca.: 1200x1200x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 220 mmstroke: 8 - 80 mm mmtotal power requirement: 2,2 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 0,9 x 1,5 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tthroat: 330 mmstroke: 20-120 mmno. of strokes: 50 Hub/minram - range of adjustment: 100 mmtable surface area: 800x640 mmram surface: 500x400 mmhole in the table: Ø 330 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 8 tdimensions of the machine ca.: 1500x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tthroat: 550 mmstroke: 10 - 140 mmtable surface area: 1180 x 980 mmno. of strokes: 40 Hub/mindayligth: 500 mmram surface: 1040 x 800 mmram adjustment: 70 - 150 mmtool shank hole (depth x diameter): 435 x 55 mmrequired power: 15 kWweight of the machine ca.: 12 tdimensions of the machine ca.: 3 x 1,7 x 3 m- with additional brake- slide weight compensation- motorized slide adjustment- central grease lubrication (manual)- table mounting plate- safe for manual inlay workThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 40 t Extensión: 250 mm Tamaño de la mesa: 440 x 530 mm Diarrea en la tabla: 170 mm Ajuste de la mesa: 220 mm Superficie de la plaga: 200 x 280 mm Finalización del impacto: 60 mm Ajuste de la carrera: 8 - 80 mm Capacidad de carrera: 100 /min Motor de accionamiento: 380 V, 2,5 kW Requisito de espacio: 950 x 1450 x 2050 mm Peso: 2400 kg