Description: Machine number: 181 954 Drilling depth: up to 150 mm Table dimensions: 800 x 240 mmweight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,100 mm
bore capacity in steel (diameter): 3 - 16 mm: max. 1500 mmweight: 300 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: High-quality drill press with a high speed range for the industrial use. Drilling capacity in steel 30 mm Projection 260 mm Drill stroke 135 mm Spindle mount MT 3 Table: 420 x 350mm Column diameter 135 mm Speed 125 - 3030 rpm Feeds 0.1 - 0.2 - 0.3 mm/rev Total power requirement 1.1 kWweight approx.: 380 kg, Approx. Onsite Dimension. (l x w x h): 900 x 550 x 2,200 mm
Description: Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection Turning diameter over bed 250 mm Turning diameter over support 130 mm Turning length 550 mm Speed 50 - 2000 rpm Center height 125 mm Spindle bore 20 mm Tailstock quill mount MK 2 Tailstock quill stroke 60 mm Metric threads 0.4 - 3.0 mm Thread - inch 10 - 44 TPI Thread - module 0.2 - 12.5 mm Connection voltage 230 V Total power requirement 1.0 kW Machine weight approx. 0.12 t Space requirement approx. 1.09 x 0.59 x 0.45 mweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,410 x 610 x 410 mm
Description: Serial number: 8610016 Table dimensions: approx. 355 x 355 mm Power consumption: 1.5 kW With vice Jaw width: approx. 135 mmweight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 670 x 500 x 1,750 mm
Description: Table displacement: X= 500 mm, Y= 250 mm Excluding machine clampboring stroke: 150 mm, boring diameter: 35 mm, turning speed range: 64 - 920 rpm, table surface area l x w : 700x240 mm, weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 1,100 x 2,250 mm
bore capacity in steel (diameter): Ø 25 mmthroat: 209 mmbore stroke: 95 mmturning speeds: 12 Stufen spindle taper: MK 3 table surface area: 308x308 mmdistance spindle /table: 770 mmspindle turning speed range: 200-2440 U/mintotal power requirement: 0,75 kWweight of the machine ca.: 105 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: Manufacturer number: 0707 Speed range: 100 - 1300 rpm Drilling depth: 150 M/N Table dimensions: 350 x 320 mmweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 750 x 550 x 1,950 mm
Description: 490 to 2510 rpm Table adjustable in height Voltage 230 volts Without additional accessoriesweight approx.: 40 kg, Approx. Onsite Dimension. (l x w x h): 300 x 400 x 700 mm
- Diámetro de la mesa: 250 mm - Mesa de altura ajustable (altura de sujeción): 0 - 630 mm - Mandril de perforación: RB 18-16 L (diámetro de perforación de hasta 16 mm) - Conexión eléctrica: 220 V, 50 Hz, 510 W (especificación del motor) - Dimensiones del soporte: 0,50 x 0,30 m - Dimensiones de transporte (Alto x AnchoXD): 1,80 x 1,20 x 0,70 m (Cambios y errores en los datos técnicos y precios reservados!)
capacidad de perforación en acero (diámetro): x mm capacidad de perforación en acero (diámetro): x mmtiradora: x mmtirada: x mm trazo de ánima: x mm trazo de ánima: x mmPOLIHEDRAL DRILLING MACHINE Rango de perforación: -Cuadrado: Apertura de la llave inglesa 3-27 mm-Hexágono: Apertura de la llave inglesa 3-32 mmLa profundidad de perforación: -Cuadrado -14 mm-Hexagon-13 mmThroath150mmActerización del móstermás detalles sobre
: ja vice: 1 carcha de la pluma: ja : : 2.000 mmpeso de la máquina ca.: 790 kgmaterial fuerte:
Mandrinadora de banco macizo de la marca Stanko-Import, modelo 2H125 Importación de Stanko Tipo: 2H125 Año de construcción aprox. 1975 Taladro de varilla maciza con montura MK4 en buen estado. Dimensiones: L860 x W850 x H2400 Peso aprox.: 1050 kg Motor 2,2Kw 380V Medidor de profundidad de perforación Roscado automático (RE-LI) hasta M24 Drehz. 45 -2000 en 12 etapas Alimentación 0.1-1.6 / Umdr.in 9 niveles Proyección 200mm Rangos de ajuste: carrera de la pluma 280 mm Cabezal de perforación 170mm Mesa 270mm, 400x400 La máquina se puede ver en cualquier momento. La carga in situ se puede realizar fácilmente con una carretilla elevadora. Posibilidad de transporte en toda Alemania a través de un agente de carga.
Fabricante: Stankoimport Tipo: 2H135 Número de stock: 0984 Año de construcción: 1981 Huso: CM4 Diámetro del husillo: 90 mm Carrera del husillo: 250 mm Velocidad: 45 ... 1400 rpm Tamaño de la mesa: 500 x 450 mm Ajuste de la mesa: 500 mm Dimensiones (LxWxH): 1200 x 900 x 2500 mm Peso de la máquina: 1500 kg
Description: Morse taper 2 Collection on: 29/04/2024 or 30/04/2024 afternoon or 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionweight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 400 x 600 x 1,800 mm
Description: Capacity 13 Serial number: 1649 Voltage: 380V Speed range: 500-4500 rpm Collection on: 29/04/2024 or 30/04/2024 afternoon or 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionweight approx.: 60 kg, Approx. Onsite Dimension. (l x w x h): 240 x 600 x 800 mm
: gebraucht : 1962 : 3962 : prompt, Zwischenverkauf v : 3950 €: 1 : 40 mm: MK 4 : 350 mm: 32 - 1400 U/min: 1100 mm: 700 mm: 2650 mm: 1055 kg: automatisch 0,11 - 1,73 ( mm/U: 650 (max) mm: 780 x 650 mm: 280 mmRadial drilling machinewith 12 Revs9 automatic feedscoolant pumpNouser manualDOES NOT COMPLY WITH THE GERMAN UVV &, AUSTRIAN AMVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Description: Column drilling machine with - Quick-action drill chuck - Drill depth adjustment - Emergency stop switch - Table top rotatable Drilling capacity in steel 32 mm Projection 257 mm Drilling stroke 115 mm Drilling spindle MK 4 Drill chuck 16 mm Drilling depth 120 mm Table surface area 475 x 425 mm Column diameter 92 mm Total power requirement 1.1 kW Machine weight approx. 0.135 t Space requirement approx. 0.75 x 0.85 x 1.72 mweight approx.: 135 kg, Approx. Onsite Dimension. (l x w x h): 750 x 850 x 1,750 mm
Description: Drilling capacity in steel 40 mm Projection 360 mm Drill stroke 135 mm Recording MK 4 MK Table size 630 mm Feeds yes mm/rev Speed 120 - 1120 rpm Total power requirement 2.4 KW Machine weight approx. 0.9 t Dimensions L x W x H 1.2 x 0.8 x 2.75 mweight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,750 mm
Código 71095 Descripción Taladro de pilar Hacer WEBO Modell Gradua 50 Número de serie. 053 12 5 ¿¿¿¿año Mesa ( girable ) 620 x 600 mm Base 620 x 600 mm Capacidad de perforación ( Acero 60 ) 60 mm Pluma del husillo 200 mm Cono del husillo 5 MC Brecha 400 mm Husillo de distancia máxima – mesa 800 mm Husillo de distancia máxima – base 1250 mm Velocidades del husillo 8 pasos 56 – 1250 rpm El husillo alimenta 8 pasos 0,06 – 0,84 mm/rpm Peso 1000 kg Motor 4,0 / 3,3 kW – 380 Voltios Accessoiries alimenta automáticamente el husillo refrigerante Optie 4 cabezal de perforación de husillo ( Precio € 1.000,- ) La máquina de acondiciona está en buenas condiciones
Taladradora en línea Webo - 2 máquinas: velocidad 90 - 1000 1/min. - 4 máquinas: velocidad 4000 - 6000 1/min. - Dispositivo refrigerante - Portaherramientas: MK2 - Ancho: 200 cm - Altura: 200 cm - Profundidad: 100 cm Las buenas condiciones completamente funcionales se pueden visitar y probar en el sitio. Envíos también al extranjero. Turismo: Básicamente, me gustaría señalar que el artículo, para evitar malentendidos, se puede ver antes de la compra y probar bajo electricidad. Por favor, haga preguntas antes de comprar para evitar ambigüedades. Para preguntas generales o una cita para una visita, puedo ser contactado en cualquier momento en el número de teléfono debajo o arriba. Exceptuados los errores en la descripción y venta previa. El IVA se mostrará por separado en mis facturas. Envío con agente de carga.
Fabricante: WMW Saalfeld Tipo: BK 50 AI Número de stock: 0986 Capacidad de perforación en acero (diámetro): 50 mm Proyección: 355 mm Carrera de taladrado: 280 mm Soporte del husillo: MK5 Ajuste del clavijero: vertical motorizado de 280 mm Alimentación: 0.11-1.73 / 9step mm / rev Velocidad: 32-1400/12step rpm Tamaño de la mesa: 770x640 mm Superficie de sujeción: 630x500 mm Placa base: 490x530 mm Potencia total: 8,1 kW Peso de la máquina aprox.: 1,7 t Dimensiones de la máquina aprox. LxWxH: 1,25 x 0,8 x 2,75 m
Description: pillar drilling machine Drilling capacity in steel 50 mm Projection 365 mm Drill stroke 200 mm Recording MK 4 MK Table size 660 mm Feeds yes mm/rev Speed 63 - 1000 rpm Total power requirement 2.3 KW Machine weight approx. 0.95 t Dimensions L x W x H 1.2 x 0.8 x 2.46 mweight approx.: 950 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,460 mm
Description: Fabrication number: 10210 Operating voltage: 380 V Control voltage: 220 V Connection: 3.0 kW Rated current: 7 A Table dimensions: 450 x 360 mm With 3 grooves Attention: without the machine vice shown in the photos Spindle speed: 180 - 2000 rpmweight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 850 x 600 x 2,100 mm
Woelfel B100/S máquina usada Dia del husillo 125mm MK 6 Ram dia 165 mm con carrera 200 mm Velocidad del husillo en 24 pasos de 30 - 1200 rpm Recorrido vert. del cabezal 1250 mm Superficie de sujeción de la cama 870 x 700 mm Mesa adicional 710 x 560mm altura 500 mm Altura entre la cama y la nariz del husillo 1460 mm