mandrinadoras y centros de mecanizado usadas para la venta (3,245)

x-travel: 800 mmy-travel: 800 mmz-travel: 800 mmControl: iTNC 530 HeidenhainMain spindle:: Max. rpm: 18.000 min/-1power capacity - main spindel: 28 / 19 kWmax. Torque: 121 / 82 Nmtool taper: HSK A63 swivellable: B: 0 - 190 °swivle time: 1,2 sNC-Rotary table:: table diameter: 900 x 700 mmmax. table load: 1.400 kgrotatable: C: 360 °tool magazin:: number of toolpositions: 60 pos.tool taper: HSK A63 change-time chip to chip: ca. 5,0 secfeeds:: rapid traverse ( X / Y / Z ): 60 m/minrapid traverse: B: 30 m/minrapid traverse: C: 30 m/minfeed speeds: max. 60.000 mm/mintotal power requirement: 64 kVAweight of the machine ca.: 14,0 tdimensions of the machine ca.: 6,0 x 6,5 x 3,2 mDocuments: Coolantsystem: high pressure coolant: through spindle coolant: 40 bar turning milling head: NC-rotary table: Tool Magazine: Chip conveyor: test probe: Heidenhain TS 640 tool monitoring: BLUM Laser ...

Key data: 30 mm

Características técnicas: Capacidad de perforación continua en ST 60 30 mm 12 niveles de velocidad 60 – 2240 rpm Motor de husillo 1,1 / 1,6 kW Radio aprox. 320 milímetros

Características técnicas: Capacidad de roscado M 10 – M 45 Capacidad de corte en ST M 36 Grabación MK 2 Potencia del motor 4 kW Velocidades 35 – 185 rpm

superficie de la mesa: 170 x 170 mm superficie de la placa base: 170 x 170 mm garganta: 185 mm carrera de la pluma: 65 mm rango de velocidad de giro del husillo: 500 / 896 / 1473 / 2428 U/min diámetro de la columna: 65 mmpotencia total requerida: 0,37 kW

Oferta 23380 Características técnicas: - Capacidad de taladrado en acero ST 60 30 mm - Soporte de husillo de perforación MK 3 - 4 avances: 0,1 - 0,16 - 0,25 - 0,4 mm/rev - Velocidades del husillo de perforación en etapas de engranajes 95 - 2000 rpm - Carrera del husillo de taladrado 160 mm - Proyección 350 mm - Mesa con 3 ranuras en T ajustables en altura 340 x 320 mm - La mesa se puede inclinar hacia la izquierda + hacia la derecha -Máximo. Tabla de distancias – husillo de taladrado 500 mm - Distancia máxima de la placa base mecanizada – husillo de perforación 1050 mm - Diámetro de la columna 160 mm -Iluminación - Accionamiento 400 V / 2,4 kW - Necesidad de espacio aprox. 600 x 1950 x 800 mm - Peso aprox. 350 kg

Key data: 1625 mm, 860 mm, 760 mm

Control Ultimax 4 Recorrido X/Y/Z: 1625/860/760 mm Velocidad 8000 min-1 Almacén de herramientas para 40 Wkz., SK 40 IKZ Transportador

x-travel: 650 mmy-travel: 650 mmz-travel: 680 mmdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Capacidad de perforación en St 60, 30 mm - Husillo corto MK 3 - Carrera del husillo 120 mm - Proyección 293 mm - Soporte de mesa 420 x 300 mm, 2 ranuras en T - Placa base mecanizada 320 x 329 mm, 2 ranuras en T - Distancia placa base - portabrocas 1000 mm - Alimentación a través del torniquete - Peso 220 kg - Velocidad del husillo 160 - 2250 rpm. - Voltaje de funcionamiento 380V-50Hz - Regulación continua de la velocidad, mediante una palanca de ajuste - Velocidad del motor en 2 etapas, 700/1435 rpm - Dispositivo de roscado con cambio de sentido de rotación después de llegar a los topes finales - Dispositivo de refrigeración completamente instalado. - Depósito de refrigerante en la base de la máquina - Luz de trabajo con LED - Portabrocas RÖHM 1 - 16 mm - Nuevo tornillo de banco de la máquina de precisión (ganador de la prueba)

x-travel: 750 mmy-travel: 750 mmz-travel: 725 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 840DNC-rotary table B-axisautomatic tool changer for 320 toolspallet changing device, 2 pallets 500 mm x 500mmcoolant through spindle device IKZ (80 bar)chip conveyorcoolant deviceTechnische Daten / technical details:X-Weg längs / X-travel longitudinal 750 mmY-Weg senkrecht / Y-travel vertical 750 mmZ-Weg quer / Z-travel cross 725 mmB-Achse / B-axis 360 °Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpmWerkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/minEilgang / rapid feed 60 m/minAntriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kWGewicht der Maschine ca. / weight ca.  ...

Cartuchos guía para roscadoras Hagen & Goebel Tipo de máquina HG6 Precio original al fabricante 322.-€ neto. Les ofrezco los cartuchos guía a la mitad del precio original. Hay varias pendientes, por favor pregunte sobre la pendiente requerida.

bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: ca. 1150 mmbore capacity in cast iron: 60 mmspindle taper: MK 5 spindle turning speed range: 12,5 - 1000 U/minfeeds: 0,06 - 0,5 mm/Ucrossrail adjustment vertical: 620 mmcolumn diameter: 350 mmtotal power requirement: 7,7 kWweight of the machine ca.: 4,6 tdimensions of machine L x W x H: 2,53 x 1,15 x 2,82 mAccessories: swivelling box table, coolant- additional column guide at the end of arm -The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23 mmthroat: 300 mmbore stroke: 150 mmtable-size: 300 x 410 mmspindle taper: MK 2 total power requirement: 1,4 kWweight of the machine ca.: ca. 315 kgdimensions of the machine ca.: ca. 700 x 900 x 1900 mmMachine has fallen over. A sheet metal cover and 2 levers of the cross lever broke off. Concentricity has been tested and is OK. Functional video available. Machine can be viewed and tested on site.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 200 mmbore stroke: 70 mm: 16 mmspindle taper: MK3 spindle turning speed range: 50 - 3000 U/min: 220 mm: 425 mmtable surface area: 700 x 210 mmconnected load frequency: Vmax. distance between table and spindle-nose: 470 mmtotal power requirement: 1,5 kWweight of the machine ca.: 230 Kgdimensions of the machine ca.: 0,75 x 1,05 x 1,2 mDrilling and milling machine with- variable spindle speed- Digital depth display- Left / right switch- Cross support- swiveling spindle head- Feeds via hand crank- Tool case with contentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mmy-travel: 600 mmz-travel: 500 mmtable surface area: 2500 x 650 mmspindle taper: SK 40 control: HEIDENHAIN, TNC 426 ATC: 36 Postotal power requirement: 60 kWweight of the machine ca.: 7,5 t- with coolant through spindle -Accessories: NC-dividing unit (= 4th axis) with tailstock, center height 225 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant- new spindle on X-axis in 2020The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1250 mmy-travel: 910 mmz-travel: 875 mmControl: Siemens type: 840 D size of pallet: 800x800 mmnumbers of pallets: 2 turning speeds: 20-6000 U/mintransmission ratio: 2 Feed: 1-32000 mm/min: 360x1 °turning speeds: 16,5 U/minTable load: 1150 kgspindle taper ISO: 50 Tool changer: 165 Pos.total power requirement: kWweight of the machine ca.: 18,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 120 mmx-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmturning speeds: 19-1900 U/mintable-size: 600x1200 mmtable load: 2000 kgspindle taper ISO: 50 : Feed: 0,042-1,46 mm/Uweight of the machine ca.: . tdimensions of the machine ca.: . mTool holder: Steep taper No. 50 Din 2080 3.5The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core boring: 70-560 mmbore depth: 20000 mmdrilling diameter: 70-500 mmcore boring capacity in St 60 - reboring: special: 560-1000 mmworkpiece diameter: 3200 mmworkpiece weight: 200 tfaceplate diameter: 2900 mmspeed of boring spindle:: 100 - 500 U/minfeed range: 3 - 2000 mm/minboring spindle drive: 55 kWspindle head drive: 150 kWworkpiece turning speeds: 230 U/mincontrol: Fanuc total power requirement: - kWweight of the machine ca.: - t2010 Retrofittedequipped with:- Fanuc Control- 4-Jaw Chuck- Oil Pressure Head- Boring Head- Drill Head- 2-Point Rollers Steady Rest (4)- 3 Point Steady Rest (2)- Bar Rest (2)- Coolant & Coolant Piping- Chip Conveyor- Honing Oil Tank & Honing Tool BarsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mmy-travel: 520 mmz-travel: 460 mmCNC-control: iTNC 640 HEIDENHAINTable dimensions: Ø 650 mmmax. table load: 300 kgspindle taper: SK 40 spindle turning speed range: 12.000 U/minfeed range: 1 - 20.000 mm/minrapid traverse: 36 m/mincoolant: IKZ 30 barvoltage: 400 Vtotal power requirement: 25 kVAweight of the machine ca.: 9,2 tdimensions of the machine ca.: 2,35 x 4,15 x 2,95 mchip conveyor: 2,60 x 1,65 x 1,20 mOil cooler: 0,50 x 0,70 x 1,45 mwater cooling unit: 0,70 x 0,70 x 0,80 m- Serial-No.: 6LUD00185- Control ON: 10.918 h- Spindle ON: 2.725 h- Control: HEIDENHAIN iTNC 640- 3-D touch probe HEIDENHAIN TS 740- Travel distance B-Axis 50º/+110º,C-Axis 360º- Internal coolant supply through spindle 30 bar- Electr. handwheel- Laser tool measurement- chip conveyor- suctionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 4450 mm, 450 mm

Control Heidenhain TNC 426 Recorrido X/Y/Z: 600/450/450 mm Velocidad del husillo 10.000 min-1 Almacén de herramientas para 30 Wkz., SK 40

bore capacity in steel (diameter): 120 mmarm length: 2500 mmworkpiece height max.: ca. 1800 mmbore capacity in cast iron: 160 mmdrilling radial min./max.: 880 / 2825 mmthroat min.: 555 mmcolumn diameter: 650 mmbore spindle diameter /taper: 90 / MK 6 mmdiameter of quill: 160 mmbore spindle turning speed range: 10 - 660 U/minbore depth: 650 mmfeeds: 0,07 - 3,0 mm/Udistance spindle/base plate: min. 300 / max. 2100 mmvertical adjustment of the arm: 1150 mmbase plate surface area: 3000 x 1550 mmtotal height of machine: 4500 mmtotal power requirement: 15 kWweight of the machine ca.: 16 t- right-/left spindle run- thread cutting deviceAccessories: DRO HEIDENHAIN on X-and Z-axis (arm and boring depth)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de perforación 3-25 mm en ELB Profundidad de perforación en una carrera (mm) 810 con rearme 1.200 Roscado hasta M20 – más grande por fresado Cambiador de herramientas manual Soporte de husillo SK 40 altv. HSK 63 Potencia de accionamiento 5,5 kW / ED 100 Recorrido X (longitudinal) 1.050 mm Recorrido Y (vertical) 800 mm Carga de la mesa hasta 2.500 kg Tamaño de la mesa 1.000 x 1.500 mm Mesa giratoria CNC 0-360° manual

bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: ca. 1150 mmbore capacity in cast iron: 60 mmspindle taper: MK 5 spindle turning speed range: 25 - 2000 U/minfeeds: 0,06 - 0,5 mm/Ucrossrail adjustment vertical: 620 mmcolumn diameter: 350 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,6 tdimensions of machine L x W x H: 2,50 x 1,08 x 2,50 mAccessories: box table 1100 x 700 x 550 mm, coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro:. Adaptador de herramienta en mm: . peso:. kg

Ref. -No.: 10370Manufacturer: FANUCYear of construction: 1997Type of control: CNCControl: FANUC Series 16-MStorage location: HalberstadtCountry of origin: IrlandX-Travel: 500 mmY-Travel: 380 mmZ-Travel: 300 mmMachine length: 1560 mmMachine width: 2060 mmMachine Height: 2218 mmRotary Table (Lxw): 650 x 380 mmTable Load: 200 kgMax. Tool Weight: 2 kgMax. Tool Length: 120 - 200 mmMax. Tool Diameter: 65 mmTool change time: 1 sTool Taper: MAS BT30, MAS P30T-1 (45°) Numbers Of Tools In Magazin: 10 Tool changer: Revolvertyp (Spindel unabhängig vom Revolver) Turning Speed Range - Stepless: 1-15000 mm / minRapid Traverse X-Axis: 48 m / minRapid Travel Y-Axis: 48 m / minRapid Traverse Z-Axis: 48 m / minWeight Of The Machine Ca.: 1,7 tMax spindle speed: 8000 min⁻¹Positioning accuracy in one direction (1): 0,006 / 300 mmPositioning repeatability (2): +/- 0,002 mm

Ref. -No.: 10361Manufacturer: SCHIESSYear of construction: 2023Type of control: CNCControl: Siemens, Heidenhain, Fanuc - Configurable as requiredStorage location: HalberstadtCountry of origin: Germanyfinancing: nach AnfrageSupport sleeve diameter: 130 mmX-Travel: 3000 mmY-Travel: 2000 mmZ-Travel: 1600 mmSpindle stroke: 800 mmB-Axis: 360 °W-Axis: 800 mmSpindle Taper: SK50 Max. Tool Weight: 25 kgClamping Area: 1250 x 1250 (or configurable as required) mmT - groove width: 22 mmT - slot spacing: 160 mmSwivelling: Configurable as required °Numbers Of Tools In Magazin: 40, 60, 120, 200, 240 Spindle Speed: 2900 RPMMax. Torque: 2500 NmDrive Capacity - Spindle Motor: 41 kW

Ref. -No.: 10357Manufacturer: STARRAG HECKERTYear of construction: 2007Type of control: CNC SteuerungControl: Sinumerik 840DCountry of origin: SchweizX-Travel: 1200 mmY-Travel: 950 mmZ-Travel: 1200 mmWork spindle drive power (25% ED): 67 kWWork spindle torque (25% ED): 1508 NmTool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mmTool Piece Magazine With: 80 Pcs./pcs.Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mmFeed Speeds X/Y/Z Axis: 60000 mm / minFeed Capacities X/Y/Z: 22/18/22 NSpeed range - main spindle: 20 - 6000 RPMNumbers Of Pallets: 2 Max pallet load: 1500 kgSize Of Pallet: 800 x 630 mmpallet change time: 14 sPallet clamping area (lxw): 800 x 630 mmWeight Of The Machine Ca.: 25 t

Ref. -No.: 10356Manufacturer: AGIE CHARMILLESYear of construction: 2007Type of control: CNCControl: iTNC530Country of origin: SchweizX-Travel: 800 mmY-Travel: 500 mmZ-Travel: 540 mmMain spindle speed range: 16000 RPMTable Dimensions (Lengthxwidth): 910x500 mmTable Load: Vmax = 500kg, 5m/min = 1100kg kgNumber of T-slots: 5 Tool change time (chip-to-chip): 8 sMax. Tool Weight: 6 kgMax. Tool Length: 305 mmMax. Tool Diameter: 77 mmTool change time: 6 sT - slot spacing: 100 mmNumbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / minRapid Travel Y-Axis: 24 m / minRapid Traverse Z-Axis: 20 m / minFurther information:Addition: probe

Ref. -No.: 10354Fabricante: UNIONAño de construcción: 1998Modernización: 2000 Tipo de control: Digitale Steuerung 2DControl: HAIDENHAIN TNC 135 Lugar de almacenamiento: HalberstadtPaís de origen: Alemania Carrera X: 1600 mmCarrera Y: 1250 mm Carrera Z: 1475mm Carrera del husillo: 710 mm Dimensiones de la mesa (largo x ancho): 1250x1400 mmVelocidad del husillo: 1600 RPMCapacidad de accionamiento - Motor del husillo: 30kWPotencia total requerida: 35 kW

Ref. -No.: 10353Fabricante: UNIONAño de construcción: 1986Tipo de control: KonventionellLugar de almacenamiento: HalberstadtPaís de origen: DeutschlandCarrera X: 1600 mmCarrera Y: 1000 mm Carrera Z: 1200 mm Eje W: 710 mm Cono del husillo: SK 40 Carga de la mesa: 2500 kgTamaño máximo de la pieza de trabajo Lxwxh: Höhe 1400 mmVelocidad del husillo: 1600 RPMDesplazamiento rápido: 3,15 m / minRequisito de potencia total: 23 kWPeso de la máquina aprox.: 10,3 t

Ref. -No.: 10347Fabricante: FPTAño de construcción: 2006Tipo de control: CNCControl: Heidenhain 530 País de origen: ItalienX-Travel: 12000 mm Y-Travel: 3500 mm Z-Travel: 1500 mmCargador de piezas de herramientas con: 80uds./pcs.Velocidad del husillo: 3000 rpmCapacidad de accionamiento - Motor del husillo: 37 kWMesa redonda 1 (largo x ancho): 2500x2500 mm Mesa redonda 1 - V: 2000 mm Mesa giratoria 1 carga máxima: 30000 kg Mesa redonda 2 (largo x ancho): 2500x2500 mm Mesa redonda 2 - V: 1500 mmMesa giratoria 2 carga máxima: 30000 kgMás información: