mandrinadoras y centros de mecanizado usadas para la venta (3,235)

Boring power: 23.0 / 28.0 mmBoring depth max.: 140 mmCenter of spindle to wall or column: 300 mmColumn diameter: 125 mmSize of table plate: 415 x 385 mmSpeed: 100 - 2000 U/min.spindle taper MT: 2 MKvoltage: 380 VMotor output: 0.9 / 1.4 KWweight of the machine ca.: 225 kgDimensions (L/W/H): 900 x 600 x 1960 mm maintained condition ()Furnishing:- V-belt operated column drilling machine- Right/left running of the work spindle- Pole-changing drive motor- manual spindle feed via cross handle- Work table with 2x T-slots- Table height adjustment via hand crank- machined base plate with 3x T-slots- manual V-belt tension (front handwheel)- Connection cable including 16A plug Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9103760The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40.0 mmbore capacity in cast iron: 50.0 mmthroat: 300 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 615 x 430 mmthreading: 24 in ST Mthreading: 30 in GG Mturning speeds: 100 - 1.800 U/minfeed: 0.1-0.2-0.3-0.4 mm/Udistance spindle /table: 147 / 688 mmtotal power requirement: 0.6 / 1.8 kWweight: 470 kgheight of the machine: 1865 mFurnishing:- Electromagnetic feed clutch- with overload protection and electrical cross-handle switch- Lockable main switch- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel- Infinitely variable speed adjustment- Digital speed display- Protection class IP 54- Spindle protection with electrical fuse- Motor insulation class F (155 degrees)- Operating instructions in German including special equipment:- LED machine light pos. 12.- Thread ...

bore capacity in steel (diameter): 40,0 mmthroat: 320 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 505 x 425 mmswivelling +/-: 50 GradT-slots: 14,0 mmturning speeds: 90 - 1455 U/minquill feed: 0,1/0,2/0,3 mm/Ucolumn diameter: 120 mmtotal power requirement: 1,0 / 1,5 kWweight of the machine ca.: 380 kg.range L-W-H: 500 x 930 x 1870 mmcharacteristics- Vario drive for precise setting of the speed- Quill infeed either by hand or by mechanical feed- Easy tool change thanks to automatic tool ejector- Set speed can be read quickly and easily using the digital display- Solid, swiveling gray cast iron table with T-slots and coolant channel- The coolant system and lighting are included in the scope of delivery- Adjustable drilling depth stop, drilling depth can be read off using a scale- Right-left rotation device for thread cuttingscope of delivery- Drill chuck arbor MK 4 / B 16- coolant device- ...

bore capacity in steel (diameter): 40.0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 80 - 1125 U/mincolumn diameter: 115 mmthread: M 24 ST60thread: M 30 GG20feed: 0.10 + 0.20 mm/Udistance spindle /table: 117 / 701 mmengine output: 1.0 / 1.6 kWweight: 270 kgMachine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools).- Infi ...

bore capacity in steel (diameter): 40.0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 515 x 360 mmturning speeds: 160 - 2250 U/mincolumn diameter: 115 mmfeed: 0.10 + 0.20 mm/UT-slots: 2 x 14 x 224 mmdistance spindle /table: 117 / 701 mmengine output: 1.45 / 1.90 kWweight: 285 kgMachine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Infinitely variable speed setting by means of an adjusting lever- automatic spindle feed with feed overload protection- Spindle protection with electrical fuse- Three separate buttons for clockwise rotation - counterclo ...

bore capacity in steel (diameter): 25,0 mmthroat: 180 mmbore stroke: 80,0 mmmorse taper: 2 MKturning speeds: 180 - 2270 U/mintable-size: 305 x 305 mmswivelling +/-: 45 GradT-slots: 16,0 mmcolumn diameter: 72,0 mmvoltage: 400 Vtotal power requirement: 1,1 kWweight: 57,0 kgrange L-W-H: 400 x 630 x 990 mmscope of delivery- Keyless chuck 1 - 16 mm / B 18- Drill chuck arbor MK 2 / B 18- Digital quill stroke display- machine light- Right-left rotation- protective cover- Height-adjustable protective cover- T-nuts- operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32.0 mmthreading: max. M 24 throat: 265 mmbore stroke: 150 mmturning speeds: 320 - 1820 U/minmorse taper: 3 MKtable-size: 332 x 332 mmT-slots: 14.0 mmcolumn diameter: 100 mm: 400 x 380 mmdistance spindle/base plate: max. 735 mmvoltage: 400 Vtotal power requirement: 2.2 kWweight: 246 kgrange L-W-H: 520 x 920 x 1380 mmDescription:- robust table drilling machine with thread cutting device- very smooth running thanks to pulleys made of gray cast iron- drive: V-BELT- quality ball bearings ensure a high concentricity of the spindle- large drilling table with diagonally running T-slots- drilling table height adjustment via rack- thread cutting device- powerful and high-torque aluminum motor in accordance with IP 54- standard with T-slots in the ground base plate- ergonomic handles for comfortable working- foldable drilling spindle guard- emergency stop button  ...

Key data: 50 mm, 335 mm, 280 mm

Potencia: 7,8 kW Peso: 1.650 kg Tamaño de la mesa: 630 x 500 Velocidad: 45 - 1.000 rpm La máquina está lista para funcionar y se puede dispensar inmediatamente.

Key data: 450 mm, 270 mm, 310 mm

Chiron FZ08KS Magnum, NC máquina: 3 ejes Mesa de trabajo: Largo [mm]: 770, Ancho [mm]: 290 Información de la tabla: Mesa rígida con bandeja de virutas para una caída óptima de las virutas para mecanizado en húmedo y en seco Área de sujeción: 770 mm x 290 mm con patrón de perforación de trama M16 x 15H7 x 50mm Carga de la mesa: máx. 500 kg Desplazamiento rápido: eje X e Y 40 m/min, eje Z 60 m/min Velocidad máxima [rpm]: 1500 Dimensiones/Peso: Largo [m]: 2,308, Ancho [m]: 1,405, Alto [m]: 2,447 Peso total [Kg]: 3400 Electrónica: Tipo de control: Control CNC Siemens 84OD PCU 50 / NCU 572.4, 6 circuitos de medición, 1 canal incl. pantalla TFT a color de 10,4 pulgadas / teclado completo OPO10S Lógica del panel de control de Windows NT SIN RAM 256KB Conexión de la máquina: Voltaje [V]: 400 / 230V t 107o - 50Hz/N/PE Frecuencia [Hz]: 50/60Hz ...

Key data: 630 mm, 400 mm, 500 mm

Chiron FZ 18 W, máquina NC: máquina de 5 ejes Diámetro del círculo de interferencia [mm]: 630 con plano alterno variaber Wz Tamaño de la placa: Dispositivo de cambio de piezas 0 / 180 en función del peso, Autorregulación gracias al control de velocidad de autoaprendizaje Carga de transporte por lado Ø - máx. 400Kg con tabique central de acero inoxidable Área de sujeción 2 x 940 x 470 mm² con rejilla roscada y orificio de ajuste: M16x 15H7x50mm Tiempo de cambio de la pieza: aprox. 3,7 seg. dependiente del peso, Autorregulación gracias al control de velocidad de autoaprendizaje Mesa de trabajo: Mesa giratoria NC de dos ejes Tipo ATU 200/AWU 160, Fabr. PEISELER Placas frontales de 180 mm con orificio de centrado A50 + 012 Pasador de fijación 16H7 y 4x M10 en círculo de pernos 104.8 Altura central 174 mm con eje de rotación horizontal Dimensión hast ...

Key data: 450 mm, 270 mm, 310 mm

Chiron FZ08K S Magnum Mesa de trabajo: largo 770 mm, ancho 290 mm (superficie de sujeción) Mesa rígida con bandeja de virutas para una caída óptima de las virutas durante el mecanizado en húmedo y en seco. Con patrón de perforación de trama: M16 x diámetro 15 H7 x 50 mm Desplazamiento rápido: 75 m/min en los ejes X, Y y Z Velocidad máxima [rpm]: 3000 Dimensiones/Peso: Largo [m]: 2.308, Ancho [m]: 1.405, Alto [m]: 2.447 Peso total [Kg]: 3400 Electrónica: Tipo de control: Control CNC Siemens 840D (PCU 50 / NCU 572.3, 6 circuitos de medición, 1 canal) incl. pantalla TFT a color de 10,4 pulgadas/teclado completo OP010S Lógica del panel de control Windows NT/XP Conexión de la máquina: Voltaje [V]: 400 / 230 + 6% / -10% - 50Hz/N/Pe Frecuencia [Hz]: 50/60Hz Tipo de corriente: corriente trifásica Potencia: 14kVA

spindle diameter: 200 mmx-travel: 16200 mmy-travel: 5250 mmz-axis: 1600 mmw-axis: 1990 mmspindle turning speed range: 0,9 - 930 U/minfeeds: 6000 mm/minrapid traverse: 6000 mm/mindimension of the ram: 520 x 520 mmmain drive motor: 77 kWControl: Heidenhain TNC 530 tool taper: ISO 60 total power requirement: 180 kVAweight of the machine ca.: - tdimensions of the machine ca.: 20 x 12 x 8 m2008 modernised with new electrics, motors and controlsequipped with:- Control Heidenhain TNC 530- Rotary Table SEA60 3500 x 4000mm, 60t- coolant system- chip conveyor- angular milling head- without floor platesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1520 mmy-travel: 700 mmz-travel: 800 mmcontrol: Siemens 828 D Shop Milltable surface area: 1600 x 700 mmrapid traverse: 30 m/mintable load: 1,4 tturning speed range: 8000 U/minmax. torque on the spindle: 300 Nmpower capacity - milling spindle: 19,5 kWno. of tools in the magazine: 30 Stücktool taper: SK 40 | |weight of the machine ca.: 10,0 tdimensions: 4,4 x 2,3 x 2,9 mEquipment: - Coolant through the spindel - Rigid tapping - Dialog programming Shop Mill - Chip conveyor - external elect. hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OKUMA MX55 Control: OSP700M Horas de máquina (tiempo de funcionamiento del husillo): 26,889 Accesorios: varios portaherramientas BT50; 4. Fijación parcial del eje

Key data: 2 mm, 425 mm, 400 mm

Centro de mecanizado (vertical) CNC TIPO: SW BA25 Control: Siemens 840 C Recorrido X/Y/Z: 2 x 600 o 1 x 1.800 / 425 / 400 mm Husillo principal: SK40 / 7.500 rpm / 106 Nm / 14kW / IKZ Desplazamiento rápido: 40 m/min Cambiador de herramientas: 36 velocidades Dimensiones A/H/D: 5.100 / 3.000 / 2.900 mm Peso: 9.500 KG Equipo: Una o dos estaciones con operación de lanzadera Lado izquierdo con 4º eje controlado y doble abrazadera hidráulica Lado derecho 2x abrazadera doble hidráulica Unidad hidráulica separada para aumentar las presiones de sujeción bajo sujeción manual Se puede volver a la tensión controlada por el programa a través del sistema hidráulico central Transportador Dispositivo de refrigerante con filtro de separación y bomba de alta presión para el suministro interno de refrigerante Preparado para las sondas de contacto de Renishaw

Capacidad del orificio en acero (diámetro): 32 mmgarganta: 325 mmCarrera del orificio: 170 mmcono MK: 3 MKtamaño de la mesa: 560 x 480 mmavances: 0,1 - 0,16 - 0,25 mm/Velocidades de giro: 60 - 1400 U/minPotencia total requerida: 1,8 KW Peso de la máquina aprox.: 0,55 tDimensiones: 1,2 x 0,8 x 2,1 mTaladro de columna con:- Avance- Velocidad variable del husilloLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Key data: 100 mm, 500 mm, 480 mm

Fabricante: Brother Tipo: Speedio W-1000 XD1 Puesta en marcha: 2024 Tipo de control: CNC D00 y programación de diálogo de texto sin formato Ejes: 4 Recorrido X: 100 mm Recorrido Y: 500 mm Recorrido Z: 480 mm + elevación del soporte 150 mm 4. Eje 360 Velocidad del husillo: 16 -16000 rpm Cono adaptador de husillo: BBT-30 (BT-30) Estaciones de herramientas: 21 (cambiador de herramientas de alta velocidad) Extras opcionales: Suministro interno de refrigerante 15 bar con sistema de prefiltro autolimpiante Depósito de refrigerante 150 litros Sistema de eliminación de virutas "doble" para virutas gruesas y finas, incluido el sistema de filtrado Puerta lateral automática para carga de robots Extracción de neblina de emulsión para área de trabajo 700 m³/h Mesa giratoria CNC Brother T200 Ad.L sujeta con contracojinete 2 x junta rotativa de 4 fluj ...

Oferta 25248 Características técnicas: - Capacidad de perforación en acero ST 60 45 mm - Capacidad de perforación en acero ST 60 55 mm - Soporte de husillo de taladrado MK 4 - Carrera del husillo de taladrado 200 mm - Velocidades del husillo de taladrado infinitamente ajustables de 60 a 1600 rpm - Derecha: rotación en sentido contrario a las agujas del reloj - 3 Alimenta electr. Indentación magnética 0,1; 0,16; 0,25 mm/rev - Proyección 360 mm - Husillo de taladrado de distancia máxima – mesa / placa base 775 / 1255 mm - Mesa con 2 ranuras en T de 630 x 540 mm - Altura ajustable mediante cremallera con manivela - Accionamiento 400 V / 2,7 / 4,0 kW - Requisito de espacio aprox. L 800 x Al 2100 x Pr 980 mm - Peso aprox. 750 kg - con: - Tornillo de banco para máquinas - Portabrocas sin llave de 1 a 13 mm - Botón de par ...

x-travel: 3.000 mmy-travel: 1.000 mmz-travel: 860 mmControl: Heidenhain iTNC-530 table-size: 3.600 x 1.050 mmT-slots: 7 x 18 T - slots distance: 125 mmdistance table - lower edge spindle: 25-366 mmtable weight: 4.200 Kgb-axis: +-105 °c-axis: +-360 0rapid travel x/y/z: 30.000 mm/minrotary table: Durchm. 1.000 mmmax. turning diameter: 1.400 mmnumber of spindle speeds: 9.000 U/min/rpmtool taper: ISO-50 DIN 69871-AD spindle drive: 28,5 kWmax. torque on the spindle: 240 Nmtool change unit: AITEK, 40 fach: 20 handwheel: Ink. Shuttle operation: Inkl Chip coveyor: Ink. Internal cooling system: 20 bartotal power requirement: 65 kWweight of the machine ca.: 24,8 tdimensions of the machine ca.: 8.056 x 5.496 x 3.790 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m(55)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m(60)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m(46)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m(47)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m(61)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: . mmbore depth: . mmswing diameter: . mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m(52)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.