prensas usadas para la venta (1,576)

pressure: 150 tthroat: 400 mmstroke: 400 mmdayligth: 600 mmtable surface area: 1000 x 600 mmControl: Siemens S7 hole in the table: 0 mmtable height over floor: mmram surface: 1000 x 600 mmworking feed: 5 - 15 mm/secspeed down: 130 mm/sekspeed up: 180 mm/sekpower requirement: 18 kWweight of the machine ca.: 12,0 tdimensions: 2,4 x 1,9 x 3,5 mSingle-column press with- Hardened and chrome-plated cylinder- Main cylinder diameter 270 mm- Auxiliary cylinder diameter 70 mm- Bosch Rextroth pump, valves, and filters- Hydraulic overload valve- Hydraulic proportional valve- Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time- Category 4 sensors and photoelectric sensor- Two-hand control panel with reset and emergency stop buttons- CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presión: 85 tchamfer Longitud: 2050 mm Distancia entre columnas: 1750 mm Control: DELEM carrera: 215 mm Garganta: 410 mm Potencia total requerida: 13 kWweight: 8,750 kg Tamaño total: 3190 x2100 x 2375 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 330 tchamfer lenght: 6100 mmdistance between columns: 5600 mmControl: Cybelec VisiTouch 24 stroke: 300 mmdayligth: 500 mm: 160 mm/sbending speed: 0-9 mm/stotal power requirement: 32 kWweight of the machine ca.: 36.000 kgdimensions: 6970 x 2300 x 4150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 15 stroke: 250 mmdayligth: 470 mm: 180 mm/sbending speed: 0-10 mm/s: 165 mm/stotal power requirement: 15 kWweight of the machine ca.: 12.500 kgdimensions: 4000 x 2000 x 3030 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tchamfer lenght: 3550 mmdistance between columns: 3000 mmControl: Cybelelc DNC 1200 total power requirement: kWweight of the machine ca.: 18.500 kgdimensions of the machine ca.: 4300x2750x3750 mmAccessories:- 2-hand foot switch- Lasersafe Fisseler- Hydraulic tool clamping at top and bottom- Die shift- Hydraulic crowning- Support arms- Cybelec DNC 1200 control- 1 set of upper and lower tools- Controlled axes y1, y2, x, r, z1, z2, inclined stop- Protective grilleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 15 stroke: 250 mmdayligth: 470 mm: 180 mm/sbending speed: 0-10 mm/s: 165 mm/stotal power requirement: 15 kWweight of the machine ca.: 12.500 kgdimensions: 4000 x 2000 x 3030 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 tchamfer lenght: 2050 mmdistance between columns: 1550 mmcontrol: CYBELEC DNC 1200 PS Eco stroke: 550 mmtable height: 700 mmthroat: 405 mmdistance between table / ram: 320-870 mmcolumn arm: 405 mmweight of the machine ca.: 14.000 kgAccessories / equipment:- controlled axes: Y1 - Y2 - X - R- Z1 and Z2 can be moved manually- Lasersafe angle measurement- Pneumatically adjustable support table- pneumatic upper and lower tool clamping- 2-hand foot control- manual crowningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: 3100 mmControl: Delem DA 66S stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 15 kWweight of the machine ca.: 10.000 kgdimensions: 4080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: 3100 mmControl: Cybelec VisiTouch 24 stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 15 kWweight of the machine ca.: 11.500 kgdimensions: 4080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 tchamfer lenght: 3100 mmdistance between columns: 2600 mmControl: Cybelec VisiTouch 24 throat: 500 mmdayligth: 500 mmstroke: 300 mm: 165 mm/sbending speed: 0 - 10 mm/stotal power requirement: 32 kWweight of the machine ca.: 18.500 kgdimensions: 3900 x 1970 x 3520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 3100 mmcontrol: CybTouch 15 Windows stroke: 215 mmsafety distance: 350 mmpressing speed: 1-10 mm/seccolumn daylight: 3250 mmcompressed air: max. 8 barclosing speed: 200 mm/stotal power requirement: 7,5 kWweight of the machine ca.: 8.000 kgrange L-W-H: 3450x2000x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec VisiTouch 24 stroke: 300 mmArm length: 500 mmdayligth: 500 mm: 165 mm/sbending speed: 0 - 10 mm/stotal power requirement: 32 kWweight of the machine ca.: 21.000 kgdimensions: 4850 x 2300 x 3520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 74800 €: 1413.72 €: 100 to: 500 mm: 1000x800 mm: 600 mm: 26 mm/s: 5 mm/s: 4 kW: 1260 mm: 1060 mm: 2400 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 159300 €: 3010.77 €: 320 to: 4050 mm: Y1 / Y2 / X und R Achse : 365 mm: 3600 mm: 410 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 160 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 154 mm: 2 x 11 kW: 5300 mm: 1910 mm: 3230 mm: 20100 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Wi ...

pressure: 2000 tdistance between columns: - mmstroke: 140 mmstrokes per minute: 15-50 H/mintable surface area: 1000 x 1100 mmdimension of ram: - mmweight of tools max.: - kgShut Height: 650 mmdistance table - lower edge of ram: - mmram adjustment: 25 mmmain drive: 30 kWtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mmProduction of stamped and formed parts, mechanical drive with toggle lever driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 220 mmdayligth: 480 mm: 140 mm/sbending speed: 0-10 mm/s: 110 mm/stotal power requirement: 18,5 kWdimensions: 4500x2000x2900 mmweight: 13.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 31400 €: 599,74 €: 100 a: 500 mm: 800x600 mm: 615 mm: 26 mm/s: 4 mm/s: 4 kW: 1600 mm: 900 mm: 2300 mm: 3100 kg2 velocidad máxima ajustable Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : 2025 : 080109 : prompt, Zwischenverkauf v : Türkei : 68282 €: 1135.89 €: 1 : 1 : 60100 €: 120 to: 3050 mm: Y1 / Y2 / X und R Achse : 180 mm: 2550 mm: 250 mm: 375 mm: hydraulisch : 100 mm/s: 9 mm/s: 77 mm/s: 620 (mit optionaler R-Ach mm: 250 mm/s: 878 mm: 104 mm: 150 l: 11 kW: 3750 mm: 1230 mm: 2400 mm: 5900 kg4 axes (Y1, Y2, X and R axes)CNC control DT-10- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBCNC controlled back gauge with linear guide and ball screw spindlesCNC controlled crowning tableintermediate clam ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 72300 €: 1366.47 €: 40 to: 1250 mm: Y1 / Y2 / X und R Achse : 200 mm: 1050 mm: 250 mm: 440 mm: servomotorischer Spindela : 115 mm/s: 10 mm/s: 115 mm/s: 650 mm: 250 mm: 1000 mm: 7.2 kW: 1950 mm: 1450 mm: 2650 mm: 3600 kgSTANDARD EQUIPTMENT:servomotorized spindle drive4 axes (Y1, Y2, X and R)Color graphics controlDELEM DA-66S- 17 ", Touchscreen- 3D imaging in simulation and production- Suitable for personal Windows applications- Compatible with DelemModusys- USB and peripheral interface- Skill-specific application treatment- Sensor, bending and correction interfaceservo motorized back gauge on linear guides and ball screwsCNC crowning tableupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)laser safety device Fiessler AKASmounted on the upper beamlinear guided sheet support armsaccording to C ...

: neu : 2025 : 080102 : prompt, Zwischenverkauf v : Türkei : 52200 €: 804.11 €: 1 : 42100 €: 60 to: 2100 mm: X und Y Achse : 160 mm: 1700 mm: 320 mm: 380 mm: hydraulisch : 90 mm/s: 10 mm/s: 600 mm: 845 mm: 100 mm: 120 l: 7,5 kW: 2450 mm: 1600 mm: 2235 mm: 4340 kgNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslaser safety device Fiesslermotorized crowning tableintermediate pieces for the upper tool clampingdie holder for 60 mm toolsdie with 4 V openingsupper tool, slightly cranked, sectionedfoot pedaluser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 127400 €: 2407.86 €: 220 to: 4050 mm: Y1 / Y2 / X und R Achse : 265 mm: 3600 mm: 410 mm: 530 mm: hydraulisch : 200 mm/s: 12 mm/s: 180 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 104 mm: 2 x 11 kW: 5250 mm: 1770 mm: 2900 mm: 15000 kg1 SERVO MOTOR AND PUMP PER CYLINDERStandard accessories:4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm t ...

: gebraucht : 2022 : 8254 : prompt, Zwischenverkauf v : Türkei : 22240 €: 1 : 30 to: 1250 mm: X und Y Achse : 150 mm: 1010 mm: 255 mm: 265 mm: hydraulisch : 210 mm/s: 10 mm/s: 3 kW: 1760 mm: 1375 mm: 2135 mm: 1700 kgDEMO MACHINE, MINT CONDITIONNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslight barriersdie seat and diedie seat with 4 V openingssplit upper tool, slightly cranked, dividedpedaluser manual in GERMANincl. laser protection device Fiessler(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 63500 €: 1200.15 €: 70 to: 500 mm: 900x700 mm: 600 mm: 25 mm/s: 6 mm/s: 4 kW: 1140 mm: 940 mm: 2350 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 172500 €: 3260.25 €: 300 to: 500 mm: 1250x1000 mm: 600 mm: 22 mm/s: 2 mm/s: 7.5 kW: 1750 mm: 1500 mm: 2800 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manualOPTIONS: Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of Lo ...

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 23700 €: 455.04 €: 40 to: 800 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 1750 mm: 950 mm: 1900 mm: 1640 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 117000 €: 2211.3 €: 125 to: 500 mm: 800 x 400 mm: 900 x 600 mm: 600 mm: 300 mm: 115 mm/s: 42 mm/s: 7 mm/s: 70 mm/s: 15 kW: 1400 mm: 1950 mm: 2600 mm4 guides for the slideT-slots in the tableRexroth hydraulic unitMonitored electrovalvesAir/oil heat exchangerPressure switchDouble pushbuttons controlStroke adjustment by limit switch micronsSiemens CPULateral fixed protrection gratesCE certification following ",IV enclosure",OPTIONS(prices on request):Blank holderPrismatic guidesFrontal light curtainCNC control Siemens with touchscreenHydraulic pump with variable flowProportional valvesLateral sliding guides with security micronsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 175 mmdayligth: 240 mmthroat: 350 mmworking feed: 9.0 mm/secreturn speed: 86.0 mm/secwork height max.: ca. 920 mmControl: ERD 110 M oil volume: 150 ltotal power requirement: 15.0 kWweight: 9300 kgrange L-W-H: 4250 x 2170 x 2800 mmFeatures:- NC electro-hydraulic press brakes- with DURMA NC control ERD 110M Illuminated LCD display X-axis control & value display Y-axis control & value display- Swiveling operator panel, front left- NC controlled axes: Y1/Y2 + X- NC electro-motorized backgauge (X-axis) with 2x manually adjustable stop fingers including lateral and height adjustment (Z+R axes)- NC electro-motorized depth adjustment (Y-axis)- Manual bending table crowning Adjustment via hand crank with analog value display- AMADA/PROMECAM upper tool holder with upper wedge crowning & quick-change adapte ...

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 €: 2324.7 €: 170 to: 500 mm: 1200x700 mm: 600 mm: 110 mm/s: 7 mm/s: 70 mm/s: 19 kW: 2700 mm: 1600 mm: 2650 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: ca. 5 tdayligth: 110 mmthroat: 40 mmweight of the machine ca.: ca. 50 kgdimensions of the machine ca.: 1,2 x 0,5 x 1,3 mFunction: ready for operation: 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presione: 200 Longitud ajustable: 1600 mm Ancho de la mesa: 1300 mm Luz: 1800 mm Control: Simatic Capacidad de retorno de la rama: 6000 kg Capacidad de carga table: 7000 kp Requisito total de potencia: ? aprox. 25-30 kWweight de la máquina aprox. 19 tDimensiones de la máquina aprox. 2,95 5 6 m Precio especial 49.900 EUR desde la fundación hasta la aceptación hasta el 30 de enero de 2026. Precio normal del almacén. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.