48 results
Número de artículo: 126344358
PT
LOIRE SAFE 500 TON PRESS
HYDRAULIC PRESS of 500 TON. With 2000X1200 MM TABLE
Número de artículo: 128147365
500 € 
ES
Weight approx.: 260 kgDimensions (l x w x h) approx.: 1400 x 1100 x
2000 mmDescription: -
Número de artículo: 125655715
3 x DIEFFENBACHER presses, each 400 tn
new in 1995
Good working condition!
Número de artículo: 127985689
Weight approx.: 3800 kgDimensions (l x w x h) approx.: 800 x 1600 x
2200 mmDescription: Closing pressure 45 ton. Adjustable stroke
18-35-60-84-100 mm. Closing height 180 mm. Trolley adjustment 60 mm.
Table measures 740x400 mm. Strokes per minute 65.
Número de artículo: 123504941
Hydtaulic Press ONA 400 tn, plate 2000 x 1000 mm
Good working condition
Número de artículo: 127985700
Weight approx.: 100 kgDimensions (l x w x h) approx.: 1200 x 600 x
2200 mmDescription: Power 10 Tn. Table surface 400x300 mm
Número de artículo: 121224772
Mechanical press Mecfond 450 TN, plate 1500 X 2750 mm, daylight 1500
mm, good working condition!
Número de artículo: 127985704
Weight approx.: 200 kgDimensions (l x w x h) approx.: 600 x 950 x 2000
mmDescription: Rated force 200 Kn. Throat capacity 150 mm. Travel 150
mm. Table dimension 480x300 mm. Electric power installed 4 kW
Número de artículo: 121093078
Friction Spindle Press GAMEI PHG 230, new in 2003
560 TM
TABLE DIMENSIONS 610 X 730 MM.
SPINDLE DIAMETER 230 MM
BETWEEN COLUMNS 640 MM
BETWEEN GUIDES 520 MM
Altura de la mesa al suelo 800 mm
Strokes 30/42 MIN.
Very good working condition
Número de artículo: 127985708
Weight approx.: 100 kgDimensions (l x w x h) approx.: 1000 x 600 x
1850 mmDescription: Power 10 Tn. Table surface 400x300 mm
Número de artículo: 121066551
Double action press Danly model TU-800-180, plate 4572x2438mm
inner slide force 800Tn, blank holder force 6ooTn.
moving table. Gppd working condition!
Número de artículo: 127946918
Weight approx.: 5800 kgDimensions (l x w x h) approx.: 4100 x 2000 x
3400 mmDescription: Closing power 125 ton. Folding capacity 4000 mm
Número de artículo: 120987682
US
This is an 85 tonne Mobile Forging Manipulator new in the early
2000's
Carrying capacity 850.0 kN (85.0 t)
Tongs moment 1,700.0 kNm (170.0 tm)
Technical data:
Manipulator Abilities:
Weight load max (for hot forgings) 850.0 kN
Weight load nom. 700.0 kN
Load moment max (for hot forgings) 1,700.0 kNm
Load moment nom 1,400.0 kNm
Max moment for front wheel 3,443.0 kNm
Wheel Pressure with nom. load, max front wheel 4 x 65665 kg
Wheel Pressure without load, max rear wheel 2 x 61250 kg
Stability moment, a ...
Número de artículo: 127929214
Weight approx.: 1900 kgDimensions (l x w x h) approx.: 1300 x 1200 x
2100 mmDescription: Table dimensions 750x400 mm
Número de artículo: 120987681
Carrying capacity 40.0 metric tons 44.0 US tons
Clamping moment 75.0 meter tons
Tongs opening range for rounds w/o inserts:
max 1,700.0 mm 72.8"
min 400.0 mm 15.7"
Tongs opening range for rounds with inserts:
max 400.0 mm 15.7"
min 200.0 mm 7.9"
Max turning circle of opening tongs 2,400.0 mm 94.5"
Min tongs center height above rails 1,500.0 mm 59.0"
Vertical stroke of tongs parallel to floor 1,100.0 mm 43.3"
Vertical tilting angle of tongs 7º 7º
Horizontal side shift of tongs ±250.0 mm ±9.8"
Center ...
Número de artículo: 127929216
Weight approx.: 1980 kgDimensions (l x w x h) approx.: 1300 x 1200 x
2100 mmDescription: Closing pressure 40 ton. Manufacturing No. 219.
Strokes 8-26-51-73-90-100 mm. Maximum stroke of connecting rod 70 mm.
Strokes per minute 100. Motor 3 HP. Dimensions of table 750x400 mm
Número de artículo: 120980273
4" National ATF High-Duty Upsetter w/Automatic Tong Feeding System -
Re:24625
Note: This design is ideal for Long Production Runs of Upset Forgings
Strokes per minute 25
Rated steel bar capacity 101.6 mm 4.0"
Ram stroke 343.0 mm 13.500"
Grip opening 152.0 mm 6.000"
Gather 158.0 mm 6.250"
Hold 76.0 mm 3.000"
Crank pin diameter of main shaft 381.0 mm 15.000"
Main motor 40.0 kw 50.0 hp
Die Space Dimensions:
Length of die space 546.0 mm 21.500"
Height of die space 660.0 mm 26.000"
Thickness of ...
Número de artículo: 127855141
Weight approx.: 2000 kgDimensions (l x w x h) approx.: 800 x 1000 x
2600 mmDescription: Table dimensions 500 x 370 mm.
Número de artículo: 120980272
2,250 ton 9” National Heavy Duty Horizontal Forging Machine
(Upsetter) - Re:24440
Forging tonnage rating 2,250 tons
Gripping tonnage rating 1,125 tons
Strokes per minute 25 spm
Bar diameter rating 228.6 mm 9.0”
Ram stroke 660.0 mm 26.0”
Grip opening 279.4 mm 11.0”
Gather 381.0 mm 15.0”
Hold 139.7 mm 5.5”
Crank pin diameter of main shaft 558.8 mm 22.0”
Length of main shaft bearings:
long 647.7 mm 25.5”
short 609.6 mm 24.0”
Distance face of wedge to face plate heading slide forwa ...
Número de artículo: 127670468
Weight approx.: 40000 kgDimensions (l x w x h) approx.: 3000 x 1900 x
5000 mmDescription: Capacity 300000 kg, for further details see photo
of type plate,Type: FAe? 40 ?17 G
Número de artículo: 120980271
Horizontal Forging Machines Etchells MF40/1000 S.P.H. MultiForge
1,000 ton Etchells model MF40/1000 S.P.H. Vertical
Multi-Station Upsetter w/(4) Tie-Rod Construction - Re:24400
Built by Etchells Machinery Ltd. – West Midlands, England
This machine was primarily designed by Etchells to form AeroSpace
Engine Turbine Blades and more
specifically to form the ends of Jet Engine Turbine Blades up to 13”
wide with a 2” thick upset on the end.
Major specifications: metric standard
Nominal diameter c ...
Número de artículo: 126711368
Weight approx.: 1500 kgDimensions (l x w x h) approx.: 800 x 1200 x
2200 mmDescription: Table dimensions 630 x 360 mm.
Número de artículo: 120980270
1 ton (2,200 lbs) Glama GSM 10/16P Rail Bound Forging Manipulator -
Re:24309
Carrying capacity 10.0 Kn 2,200.0 lbs
Moment capacity 16.0 KNm 5.8 ft tons
Tong opening range for rounds & squares:
max 404.0 mm 15.9”
min 120.0mm 4.7”
Max tong turning circle 865.0 mm 34.0”
Peel centerline lowest horiz position above rails 550.0 mm 21.6”
Peel straight line parallel lift 900.0 mm 35.4”
Peel shift to either side of centerline ±150.0 mm ±5.9”
Peel tilts upwards 10º 10 degrees
Peel tilt downwar ...
Número de artículo: 121520908
Weight approx.: 120 kgDimensions (l x w x h) approx.: 450 x 450 x 2050
mmDescription: Hydraulic driven, Max. dimensions of barrel: height
approx. 500 mm - diameter approx. 350 mm, Motor 1.50 kw
Número de artículo: 120975507
Two 120kN Glama GSM 120/250 Rail Bound Forging Manipulators exactly
the same are available
Carrying capacity 120.0 kN
Clamping moment 250.0 kNm
Load moment/related to center of front wheels 480.0 kNm
Peel rotating torque 25.0 kNm
Traction force 100.0 kN
Parallel horizontal position of tongs center above floor:
min 1,050.0 mm
max 1,950.0 mm
Parallel vertical stroke 900.0 mm
Vertical tilt of tongs:
up 6º
down to floor
Parallel side shift +/- 200.0 mm
Angular side shift +/- 4º
Rail gauge 3,200 ...
Número de artículo: 121520951
Weight approx.: 180 kgDimensions (l x w x h) approx.: 700 x 600 x 2400
mmDescription: Hydraulic driven, Max. dimensions of barrel: height
approx. 550 mm - diameter approx. 350 mm, Motor 1.10 kw
Número de artículo: 120946503
Friction Spindle Press GAMEI PHG 400/560 (retrofited in 2004)560
TnTABLE DIMENSIONS 600 X 760 MM.SPINDLE DIAMETER 230 MMBETWEEN
COLUMNS 760 MMBETWEEN GUIDES 600 MMStrokes 37/55 MIN.Perfect working
confition!
Número de artículo: 120190189
Eccentric press with pneumatic clutch.
Power: 63Tn.
Table: 800x500mm.
Travels: 20-110.
Strokes per minute: 75.
Motor power: 7,5cv.
Número de artículo: 118375296
Hydraulic press 200 tn, plate 1600 x 2300 mm, good working condition!
For further details please do not hesitate to contact me. AGA
Número de artículo: 96038923
One used Bruderer BSTA 180U precision high speed punching press.
Year of manufacture 1999. Swiss origin.
Electric drive with frequency inverter. PLC controls.
18 metric tons nominal capacity (180 kN)
8 to 40 mm variable stroke.
Speed range 100-1400 SPM max.
Bolster area 480 x 374 mm.
Max tool loading width 359 mm L-R.
BBV 190/85 roll feed mounted on right-hand side.
Max width of strip 160 mm.
Max feed length variable up to 85 mm max.
Feed angle 180°.
End of strip monitoring electronic.
Digital feed l ...
Número de artículo: 76903633
Hydraulic Press Gabande 500 tn, plate 2000 x 2500 mm, stroke 650 mm,
daylight 1150 mm, with cushion
Good working condition!
Número de artículo: 68577907
One used HERLAN "SP6" horizontal aluminium cold impact extrusion
press. Year of manufacture 1970 270 metric tons nominal capacity,
stroke length 300 mm, number of strokes per minute 100 Max main drive
motor OSTEO 18.5 kW. Max can/tube diameter 45 mm. Max extruded length
260 mm OSTEO. Air clutch and brake. Spring ejector included. Car of
slug feeder fitted. Weight approx 9200 kgs net.
Suitable for the manufacture of aluminum collapsible tubes for beauty
or pharmaceutical industry.
Número de artículo: 64049760
SMERAL 1000 TM. model LL 1000 A, PLATE 920 X 920 MM, 15-35
strokes/min, 140 mm stroke, weight 31 tn
Número de artículo: 28830390
Mechanical Press BENELLI 400 TM
Plate 2450 X 2150 MM
30 strokes/min
stroke 350
daylight 630 mm
Número de artículo: 25606683
Table Features
Surface of the table 1000 x 400 mm
General Characteristics
Stem Travel 210 mm
Neckline 300 mm
Step between uprights 400 mm
Dimensions and Weights
High 1900 mm
Long 1200 mm
Width 1200 mm
Other Features
Force 27 TN
Piston rod Ø of 75 mm
Número de artículo: 25606679
Table Features
Surface of the table 300 x 300 mm.
General Characteristics
Stem Travel 200 mm
Neckline 150 mm
Rate of Climb 10 cm/seg.
Dimensions and Weights
High 2.050 mm.
Long 750 mm
Weight 800 Kg.
Width 600 mm
Other Features
Force 10 Tn
Piston rod Ø of 65 mm
Year 1963
Número de artículo: 25606677
Table Features
Surface of the table 465 x 395 mm
General Characteristics
Stem Travel 400 mm
Lower Speed 30 / 65 mm/seg
Maximum aperture 700 mm
Dimensions and Weights
High 2.150 mm
Long 1.040 mm
Weight 1.000 Kg aprox.
Width 450 mm
Electrical Characteristics
Voltage 220/380 V
Other Features
Force 10 Tn
Included Accessories Útiles de empuje / Useful thrust
No. Manufacturing 0104
Piston rod Ø of 65 mm
Total Power 3 Kw
URL Youtube abc://youtu.be/z ...
Número de artículo: 25606673
Table Features
Surface of the table 1050 x 360 mm
General Characteristics
Stem Travel 100 mm
Lower Speed 18 mm/s
Maximum aperture 650 mm
Neckline 160 mm
Rate of Climb 27 mm/s
Dimensions and Weights
High 2.100 mm
Long 1.200 mm
Width 1.300 mm
Electrical Characteristics
Voltage 220/380 V
Other Features
Force 20 TN
No. Manufacturing 21.204
Piston rod Ø of 100 mm
Total Power 5.5 CV
URL Youtube abc://youtu.be/VELQb2S1vsE
Year 1991
Número de artículo: 25606671
Table Features
Surface of the table 1.050 x 360 mm
General Characteristics
Stem Travel 100 mm
Lower Speed 18 mm/s
Maximum aperture 650 mm
Neckline 170 mm
Rate of Climb 27 mm/s
Step between uprights 250 mm
Dimensions and Weights
High 2.100 mm
Long 1.200 mm
Width 1.300 mm
Electrical Characteristics
Voltage 220/380 V
Other Features
Force 20 TN
Included Accessories Mesa supletoria
No. Manufacturing 22227
Piston rod Ø of 100 mm
Total Power 5.5 ...
Número de artículo: 25606667
Características de la Mesa
Superficie de la mesa 450 x 300 mm
Características Generales
Carrera del vástago 200 mm
Caudal de la bomba 18L/mm
Escote 160 mm
Presión máxima de trabajo 70 kg/cm2
Dimensiones y Pesos
Alto 2.500mm
Ancho 1.000mm
Largo 1.700mm
Características Eléctricas
Voltaje 220/380 V
Otras Características
Accesorios Incluidos Dos mesas de ranura en T.
Fuerza 5 TN
Potencia Total 4 CV
Ø Del vástago 70 mm
Número de artículo: 25606661
Características de la Mesa
Superficie de la mesa 450 x 300 mm
Características Generales
Carrera del vástago 200 mm
Escote 160 mm
Presión máxima de trabajo 70 kg/cm2
Dimensiones y Pesos
Alto 2.500mm
Ancho 1.000mm
Largo 1.700mm
Características Eléctricas
Voltaje 220/380 V
Otras Características
Accesorios Incluidos Dos mesas de ranura en T.
Fuerza 5 TN
Potencia Total 4 CV
Ø Del vástago 70 mm
Número de artículo: 25606655
Table Features
Surface of the table 450 x 300 mm
General Characteristics
Stem Travel 200 mm
Maximum working pressure 70 kg/cm2
Neckline 160 mm
Pump 18 L/mm
Step between uprights 200 mm
Dimensions and Weights
High 2.500 mm
Long 1.700 mm
Width 1.000 mm
Electrical Characteristics
Voltage 220/380 V
Other Features
Force 5 TN
Included Accessories Mesa de ranura en T
Piston rod Ø of 70 mm
Total Power 4 CV
Número de artículo: 14477847
Eccentric press with mechanic clutch.
Power: 40Tn.
Travels: 5-90.
Strokes per minute: 92.
Motor power: 2cv.
Número de artículo: 14477843
Open front eccentric press.
Power: 160Tn.
Table size: 1500x930mm.
Strokes per minute: 15.
Motor power: 30cv.
Número de artículo: 12693907
One used Platarg 811 transfer press, 11+1 stations,
cam stroke 146 mm (5.75").
Year of mfg 1982; refurbished 2017.
Standard flat plate lifter cams
Wedge adjustable rams
Platarg single roll material feed and guillotine
Insert finger type transfer slide
Pressure pad assembly fitted to stg 2
8 standard stripper arms fitted
Full set of die blocks
Side shaft assembly with dog clutch
Air cylinders
FU variable speed unit
Taylor clutch/brake unit - rebuilt!
Lumatic Oil pump system
Suds tank
Sound proo ...
Número de artículo: 12693899
One used Platarg 912 transfer press, 12+1 stations,
Cam stroke 165 mm ~ 6.50" (long stroke).
Max depth of draw (Shell height) 79 mm ~ 3.175".
Year of mfg 1985; refurbished 2017.
Standard flat plate lifter cams
12 stages + 1 slave
Wedge adjustable rams
Platarg single roll material feed and guillotine
Insert finger type transfer slide
Pressure pad assembly fitted to stg 2
9 standard stripper arms fitted
Full set of die blocks
8 ejector cams
Side shaft assembly with dog clutch
Air cylinders
Cutle ...
Número de artículo: 10989621
Mechanical Press Emua tn 400, Year 1996
302 stroke, speed 10 - 60 strokes / min, Adjustment 400 mm, 2 mobile
plates, between uprights 5350 mm
plate: 5200 x 2135 mm. Very Good working condition!
Also Available Bliss Blanking line:
Long min/max 450/1850 mm
Thickness max/min 0,5/2
Número de artículo: 8545034
Complete blanking line:
Long min/max 450/1850 mm
Thickness max/min 0,5/6
Good working condition!
Usted no ha encontrado su máquina deseada?
enviar consulta
a todos los distribuidores (no hay registro necesario)
