prensas usadas para la venta (1,738)

SLIDE  total force (nominal): 40 to  stroke rate (max.): 110 /minTOOL DIMENSIONS  lower table (left-right): 300 mm  lower table (front-back): 280 mm  shut height max.: 180 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 1835 mm  space requirements -front/back-: 1500 mm  total height: 1800 mm  total weight approx.: 2500 kg

SLIDE  total force (nominal): 80 to  stroke rate (max.): 120 /minV-RING  stroke: 90 mmTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2970 mm  space requirements -front/back-: 1665 mm  total height: 242 mm  total weight approx.: 6000 kg

CONTROLS   SIEMENS SIMATIC PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 160 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 970 mmSLIDE  stroke rate (max.): 90 /minSLIDE (MECHAN. PRESS)  slide adjustment: 120 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 3200 mm  space requirements -front/back-: 1600 mm  total height: 4400 mm  total weight approx.: 32000 kg

CONTROLS  conventional PRESS FORCES  total force (nominal): 160 toPRESS TABLE  table surface (left-right): 1000 mm  table surface (front-back): 850 mmSLIDE  stroke: 705 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1205 mmMachine hours: 78571

CONTROLS  PLC SIEMENS SIMATIC OP 47-12 PRESS FORCES  total force (nominal): 200 toPRESS TABLE  table surface (left-right): 2440 mm  table surface (front-back): 1500 mmSLIDE  table surface (left-right): 1500 mm  table surface (front-back): 1100 mm  stroke: 180 mmSLIDE (MECHAN. PRESS)  slide adjustment: 150 mm  stroke rate (min.): 20 /min  stroke rate (max.): 120 /min  main drive power: 45 kWOVERALL SPECIFICATIONS (COIL LINES)  sheet thickness max.: 2.5 mmDECOILER  sheet width max.: 300 mm  sheet width (min): 30 mm  coil weight max.: 3 to  max. diameter of coil: 1500 mm  mandrel expansion range from: 460 mm  mandrel expansion range up to: 530 mmLEVELLER UNIT  sheet width max.: 30 mm  sheet width (min): 300 mm  number of leveller rolls: 9   diameter of leveller rolls: 30 mm  number of intermediate rolls: 11   feed velocity min.: 5 m/min  fee ...

CONTROLS  conventional PRESS FORCES  total force (nominal): 100 toSLIDE  stroke rate (max.): 55 /minSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke min.: 10 mm  stroke max.: 120 mmDIMENSIONS / WEIGHTS  total weight approx.: 4800 kg

CONTROLS  electronic controls SIEMENS PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, double sided   openings in uprights: yes   number of slide actions: 1 PRESS FORCES  total force (nominal): 160 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 1050 mm  opening in bed (left-right): 240 mm  opening in bed (front-back): 200 mmSLIDE  table surface (left-right): 900 mm  table surface (front-back): 600 mm  spigot hole diameter: 50 mmSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  stroke min.: 20 mm  stroke max.: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 570 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1600 mm  space requirements -front/back-: 3000 mm  total height: 4400 mm   ...

CONTROLS  PLC PRESS DESIGN  quick die change system: yes SLIDE  total force (nominal): 630 to  stroke: 125 mmV-RING  nominal force: 320 toTOOL DIMENSIONS  lower table (left-right): 800 mm  lower table (front-back): 800 mm  shut height max.: 420 mmSTRIP-FEEDER  band lubrication system: yes ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 6800 mm  space requirements -front/back-: 3300 mm  total height: 3730 mm  height above floor level: 3005 mm  height under floor level: 725 mm  total weight approx.: 26000 kgATTACHMENTS -FINEBLANKING PRESS-  autom. tool clamping device: yes   light barrier: yes   decoiler: yes   leveller unit: yes Strip levelling machine SCHMID HR12H (YoM 1995)including belt system

CONTROLS  PLC SIEMENS SIMATIC HMI SLIDE  total force (nominal): 320 to  stroke: 200 mmCOUNTER RAM  nominal force: 63 toV-RING  nominal force: 100 toTOOL DIMENSIONS  shut height max.: 360 mmDIMENSIONS / WEIGHTS  total weight approx.: 18000 kgThe system was fitted with a new control unit approximately 1.5 years agoincluding belt systemInkl. Decoiler Schmid HR10

CONTROLS  electronic controls WORKING RANGE PRESS BRAKE  total force (nominal): 85 to  Working length: 2050 mm  distance between columns: 1700 mmBENDING BEAM (Y-AXIS)  stroke: 215 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2700 mm  space requirements -front/back-: 2000 mm  total height: 2400 mm  total weight approx.: 8300 kg

CONTROLS  PLC LAUER SLIDE  total force (nominal): 320 to  stroke: 200 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 10 mm/s  working velocity max.: 44 mm/sCOUNTER RAM  nominal force: 63 to  stroke: 30 mmV-RING  nominal force: 100 to  stroke: 30 mmTOOL DIMENSIONS  lower table (left-right): 500 mm  lower table (front-back): 500 mm  upper table (left-right): 695 mm  upper table (front-back): 730 mm  shut height max.: 650 mmDECOILER  sheet width max.: 250 mm  sheet width (min): 40 mm  coil weight max.: 1250 to  max. diameter of coil: 1300 mmLEVELLER UNIT  sheet width max.: 250 mm  sheet thickness max.: 5 mm  sheet thickness min.: 0.8 mm  number of leveller rolls: 11   feed velocity min.: 4 m/min  feed velocity max.: 12 m/minSTRIP-FEEDER  feeder type: grip feeder   sheet width max.: 250 mm  sheet th ...

CONTROLS  electronic controls SIEMENS PRESS DESIGN  drive system: hydraulic   frame design: 4 column   number of suspensions: 1   slide ejectors / cushion: yes   table cushion: yes PRESS FORCES  total force (nominal): 200 toPRESS TABLE  table surface (left-right): 1330 mm  table surface (front-back): 1150 mm  height above floor level: 850 mm  opening in bed (diameter): 250 mmSLIDE  slide force: 200 to  table surface (left-right): 1200 mm  table surface (front-back): 1200 mm  stroke: 800 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 300 mm/s  working velocity min.: 30 mm/s  return velocity max.: 400 mm/s  return force: 200 toSLIDE EJECTOR / CUSHION  working principle: hydraulical   nominal force: 30 to  stroke: 130 mmDIE CUSHION (TABLE CUSHION)  cushion force: 30 to  stroke: 850 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  ma ...

PRESS FORCES  total force (nominal): 100 toPRESS TABLE  table surface (left-right): 950 mm  table surface (front-back): 660 mm  thickness of bolster plate: 68 mmSLIDE  table surface (left-right): 540 mm  table surface (front-back): 450 mm  spigot hole diameter: 60 mm  stroke: 130 mm  stroke rate (max.): 65 /minSLIDE (MECHAN. PRESS)  slide adjustment: 100 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 370 mmDIMENSIONS / WEIGHTS  total weight approx.: 7000 kgLocated in Barcelona - Spain2 identical units available

CONTROLS  electronic controls SCHMIDT PRESS FORCES  total force (nominal): 0.25 toPRESS TABLE  table surface (left-right): 180 mm  table surface (front-back): 150 mmSLIDE  slide force: 0.25 to  stroke: 100 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 35 kgThis is an assembly press with force-displacement monitoring.• Operating hours: approx. 150• Condition: very good, almost like new• Features: Press force monitoring, two-hand operation• Stroke: 100 mm• Tool dimensions: 150 x 100 mm• Press force: 0.25 tons

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 55 toPRESS TABLE  table surface (left-right): 750 mm  table surface (front-back): 450 mmSLIDE  table surface (left-right): 400 mm  table surface (front-back): 300 mm  spigot hole diameter: 45 mm  stroke: 50 mm  stroke rate (max.): 100 /minSLIDE (MECHAN. PRESS)  slide adjustment: 70 mm  stroke min.: 6 mm  stroke max.: 50 mm  stroke rate (min.): 50 /min  stroke rate (max.): 100 /minTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 310 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1200 mm  space requirements -front/back-: 1500 mm  total height: 2500 mm  total weight approx.: 3850 kgATTACHMENTS (PRESSES)  safety guard / safety door: yes   2-hand engagement: yes  ...

CONTROLS  PLC SCHNEIDER PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 11   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 66 toSLIDE  slide force: 6 to  stroke: 114 mmSLIDE (MECHAN. PRESS)  variable speed: yes   stroke rate (min.): 40 /min  stroke rate (max.): 130 /min  main drive power: 7.5 kWSTRIP-FEEDER  feeder type: roll feeder TRANSFER SYSTEM  distance between tools, stroke X fixed: 82 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2875 mm  space requirements -front/back-: 1500 mm  total height: 2900 mm  total weight approx.: 7500 kgATTACHMENTS (PRESSES)  safety guard / safety door: yes   2-hand engagement: yes   noise protection cabin: yes   acc. to actual accident protection regulation: yes Specifications:Number of stations: 12 (11+1)Capacity per ram: 6 tonsMaximum str ...

CONTROLS  PC controller BECKHOFF PRESS DESIGN  number of slide actions: 13 SLIDE  slide force: 3 to  stroke: 60 mm  stroke rate (max.): 210 /minSLIDE (MECHAN. PRESS)  slide adjustment: 6 mm  variable speed: yes   stroke rate (min.): 70 /min  stroke rate (max.): 210 /min  main drive power: 4 kWDIMENSIONS / WEIGHTS  space requirements -left/right-: 2300 mm  space requirements -front/back-: 1000 mm  total height: 1900 mm  total weight approx.: 4000 kg

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided   table cushion: yes   opening in table: yes PRESS FORCES  total force (nominal): 100 toPRESS TABLE  table surface (left-right): 710 mm  table surface (front-back): 560 mmSLIDE  slide force: 100 to  table surface (left-right): 560 mm  table surface (front-back): 450 mm  spigot hole diameter: 50 mm  stroke: 320 mm  thickness of bolster plate: 150 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 340 mm/s  working velocity max.: 32 mm/s  return velocity max.: 330 mm/sSLIDE EJECTOR / CUSHION  nominal force: 2 to  stroke: 40 mmDIE CUSHION (TABLE CUSHION)  cushion force: 10 to  stroke: 80 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 455 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 300 mm  sheet thickness max.: 20 mm  spee ...

CONTROLS  PC controller BECKHOFF Offer for servicesof complete Overhaul of a Customer-Owned Fineblanking Press FEINTOOL GKP 160Scope of Overhaul• Complete disassembly into individual components• Inspection of all parts, including crack testing of critical components• Overhaul of the drive system, new motors• Reworking and precise alignment of all guideways• Complete overhaul of the hydraulic cylinders• Overhaul of the clamping tables• Installation of a new hydraulic unit• Renewal of the pneumatic system• Renewal of the electrical systemModernisation / Retrofit• Combined table• Servo feed systems• Central lubrication system• RAZIOL band lubrication• New brake/clutch unit• BECKHOFF PC-based control system with touch panel• PILZ safety control system• Implementation of CE conformityNotes• Special options and customer-specific extensions can be integrate ...

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 50 toPRESS TABLE  table surface (left-right): 700 mm  table surface (front-back): 450 mmSLIDE  table surface (left-right): 440 mm  table surface (front-back): 360 mm  spigot hole diameter: 40 mm  stroke: 90 mm  stroke rate (max.): 70 /minSLIDE (MECHAN. PRESS)  slide adjustment: 70 mm  stroke min.: 0 mm  stroke max.: 90 mm  main drive power: 3 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 300 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 700 mm  space requirements -front/back-: 1295 mm  total height: 2360 mm  total weight approx.: 3000 kg

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 45 toPRESS TABLE  table surface (left-right): 700 mm  table surface (front-back): 440 mm  opening in bed (diameter): 40 mmSLIDE  table surface (left-right): 410 mm  table surface (front-back): 280 mm  stroke rate (max.): 110 /minSLIDE (MECHAN. PRESS)  slide adjustment: 65 mm  stroke min.: 0 mm  stroke max.: 90 mm  main drive power: 5.5 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 380 mm  distance between columns (H-frame): 360 mmATTACHMENTS (PRESSES)  2-hand engagement: yes   foot engagement: yes   European CE standards: yes

CONTROLS  conventional PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES  total force (nominal): 100 toSLIDE  slide force: 100 to  stroke rate (max.): 72 /minSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke adjustment: yes   stroke min.: 8 mm  stroke max.: 112 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 407 mmATTACHMENTS (PRESSES)  2-hand engagement: yes for safe tools only

CONTROLS  PLC SIEMENS S7 300 PRESS DESIGN  drive system: hydraulic PRESS FORCES  total force (nominal): 800 toPRESS TABLE  table surface (left-right): 2600 mm  table surface (front-back): 2000 mm  height above floor level: 540 mmSLIDE  stroke: 900 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 460 mm/s  working velocity min.: 25 mm/s  working velocity max.: 44 mm/s  return velocity max.: 460 mm/sTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1700 mmELECTRICAL SPECIFICATIONS  total power consumption: 180 kWDIMENSIONS / WEIGHTS  total weight approx.: 95000 kgATTACHMENTS (PRESSES)  press automation: yes   gripper transfer system: yes   acc. to actual accident protection regulation: yes   European CE standards: yes Complete hot forming line consisting of: Hydraulic press NEFF 800 to. Ruhstrat furnace system:- Natural gas heat ...

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: link drive   feedstock transport direction: left to right SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (max.): 80 /minCOUNTER RAM  nominal force: 22 to  stroke: 8 mmV-RING  nominal force: 25 to  stroke: 15 mmTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mm  shut height max.: 220 mm  ram adjustment: 80 mm  distance between columns (H-frame): 450 mm  passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 180 mm  sheet thickness max.: 5 mm  feed velocity max.: 999 m/minSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 180 mm  sheet thickness max.: 5 mm  feeding step max.: 999 mm  sheet length min: 1350 mm ...

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: knuckle-joint SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 75 to  stroke: 15 mmV-RING  nominal force: 75 to  stroke: 13 mmTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mm  shut height max.: 320 mm  ram adjustment: 145 mm  distance between columns (H-frame): 560 mm  passline opening (free passage in side columns): 270 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 250 mm  sheet thickness max.: 10 mm  feeding step max.: 999.99 mm  sheet length min: 1900 mm  pilot release system: yes   band lubrication system: yes Complete refurbished fineblanking press: disassembly into individual parts findings of all com ...

Presión máxima en kg: 6000

Datos técnicos Fabricante: Otto Schrode Trazo: 160mm mano ajustable Distancia entre el soporte: 800mm Pase: 250mm Mesa de soporte: 800mm, con 4 ranuras círculo de la parte 400mm dimensión de la ranura 25x75mm Agujero: Centro de mesa 70mm Altura de la mesa: 835mm Dimensiones: LxWxH 110x900x2200mm

Hydraulic dross press manufactured in 2021. This ALTEK TARDIS Gen II Model 100 features a maximum working pressure of 160 bar and a furnace sill height of 1,200 mm. It includes 10 ALTEK 181S Type Rhino Cast Steel Dross Pans with a volume of 0.12 m³ each, along with fume dust filtration and Siemens control. If you are looking to get high-quality dross press capabilities, consider the ALTEK TARDIS Gen II Model 100 machine we have for sale. Contact us for further details.

Key data: 100 t

Fabricante: Hidroliksan Modelo: CFSS 100t Año: 2022 Condición: Usada Número de stock: 9614 Horario de funcionamiento: 8:00 h Fuerza de compresión: 100 t Longitud de la mesa: 800 mm Ancho de mesa: 500 mm Carrera: 400 mm Altura de la máquina: 2930 mm Longitud de la máquina: 1600 mm Ancho de máquina: 1700 mm Peso de la máquina: 6000 kg

La máquina está en buen estado técnico; las pruebas son posibles mediante arreglo previo. Prensa hidráulica vertical con unidad hidráulica de potencia incorporada de 15 toneladas. Modo de funcionamiento: semiautomático. Fuente de alimentación: 400 V, trifásica, 50 Hz. Potencia del motor: 4 kW. Controles: regulación digital de presión; movimientos de giro hacia abajo, hacia arriba y rápidos. Peso (por placa de identificación): 700 kg. Según la sección del manual que cubre el uso previsto, esta configuración está diseñada para comprimir filtros con un diámetro de 210 mm y una altura de 1.090 mm.