rociadoras de cola usadas para la venta (597)

Unidad de biselado IMA Tipo: 08.055 - Diferentes potencias de motor disponibles Precio a consultar (según versión)

Varios motores de fresado Marca: Perske - en diferentes versiones disponibles en stock (0,2 hasta 8 kW) Precio a consultar (según versión) Por favor, háganos saber qué especificación está buscando: -poder - Tipo de eje -par motor -tipo -voltaje

The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm

Varias zonas de presión IMA - de stock - Precio a consultar

Rascador plano IMA Tipo: 08.50 Precio a consultar

1 gebr. Kantenbearbeitungsstraße IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Bj. 1996 Bestehend aus: - Doppelseitige Beschickung BIESSE RBO - Doppelseitige IMA COMBIMA für die Längsbearbeitung: Doppelzerspaner 2 x Fräsen Verleimteil mit Granulat-Vorschmelzer 6-fach Rollen-Magazin für das Kantenmaterial 1 x Hauptandruck- und 4 x Nachpressrolle Kappaggregat Bündfräsen 2 x Feinfräsen Profilziehklinge Flächenziehklinge Schwabbelaggregat Glätteaggregat - Drehvorrichtung von läng auf quer - Doppelseitige IMA COMBIMA für Querbearbeitung Schutzfräsen Doppelzerspannen Nutfräsaggregat Verleimteil mit Granulat-Vorschmelzer 6-fach Rollen-Magazin für das Kantenmaterial 1 x Hauptandruck- und 4 x Nachpressrolle Kappen am Oberdruck (Nachrüstung auf aktuelles Modell) Bündigfräsen Feinfräsen 2 x MFA Fräsen Nutfräsaggregat Profilziehklinge Fl ...

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...

Semi automatic edge bander Make: VITAP Type: FUSION 2.0 New machine Technical datas: - For straight and shaped pieces 10 - 60 mm - Edge thickness 1-3 mm - Tefloned gluing station with quick disassembly system - Glue and tape application on big and small shaped panels - Equipped with glue pot with 1 Kg capacity - 1 glueing roller - 2 rollers to copy the shape of the piece - 1 tilting support roller to enable the exit of the panel after banding - Glue application amount is adjusted via knob - Set up of the glue temperature - Automatic guillotine for coiled material up to 3 mm x 45 mm THREE KIND OF WORKS: - By Encoder - By Encoder + laser - By Pedal cut Panel materials - Solid wood - Chipboard (laminated or not) - Multilayer material - MDF or HDF (laminated or not) - Panel dimensions range: min 50x200mm max 1000x2000 mm - Shaped pieces Dimensions ran ...

Contour edge bander Fabrikat: VITAP Type: BC91 EVO Demonstration machine Technical data: - For straight and curved pieces (convex and concave) - To glue pieces thickness 10-60 mms., in PVC, melamine, veneer, plastic laminate and solid wood - 2 glue spreading rollers - Cutting guillotine up to 3 mm. thickness - Encoder for high precision cutting of the tape ( for shaped closed pieces) - Band length measuring by means of a digital electronic counter - Tape cut by foot pedal to edge just one piece - End switch tape cut (only for straight pieces) - Feeding speed adjustable from 3mt to 20mt per min. - Solid Phenolic table easy to clean and with no transmission of heat - Manual / Automatic band cutting device - Glue pot (kgs. 3), with electronic adjustable heating system -Tilting table 0°-45° - Standard accessories - CE standards

Contour edge bander Fabrikat: VITAP Type: BC91 EVO New machine Max. flexibility by means of a smart construction - For gluing chamfers on rectangular or formed workpieces - Tilting table 0°-45° - To glue pieces 10-60 mm thickness - Edge material: PVC, melamine, veneer, plastic, laminate, solid wood - Nr. 2 glue spreading rollers - Cutting guillotine up to 3 mm thickness - Glue pot (kg 3), with electronic adjustable heating system - Band length measuring by means of a digital electronic counter - Tape cut by foot pedal to edge just one piece and measuring edge length - Feeding speed adjustable from 7m to 20m per min. Solid Phenolic table - Easy to clean - With no transmission of heat - Plastic cups to raise the piece above the table - 2 kg vitap glue 280.00 for test - CE standards Optional: - Enlarged tape plate 800 mm - Semi-automatic end-c ...

Glue application machine Brand: OMMA Type: FSC 600 New machine Technical details: Useful working width mm 600 Maximum working thickness mm 90 Working speed mt/min 19 Height of working level mm 905 Spreading rollers Ø mm 185 Standard grooving lines/inch 14 Installed power kW 0.37 Colour Ral 7035 Command side (compared to working direction) Right Standard voltage v 400/50/3 Technical equipment: - Spreading rubber rollers coated with grinded surface. - Thickness graduate indicator. - Top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation. - Parallelism regulation between spreading rollers. - Rollers protection with security plate and foot control in front of the machine that stop immediately the machine if activate. - Security front foot barrier. - Steel zinc collecting tank of the cleaning water. - E ...

Hot melt contour edge bander Make: VITAP Type: SMART New machine For straight and shaped (convex or concave) pieces - To glue pieces 10-60 mm thickness, - PVC / melamine / veneer / plastic / laminate / solid wood - Edge 0,5 - 3 mm - 1 glue spreading roller 10-60 mm thickness - Guillotine to cut bands up to 3 mm thickness - 2 tape feeding speed (3m/min or 7 m/min) - Tape plate d=520mm - Glue pot 1kg capacity Solid Phenolic table - Easy to clean - No transmission of heat - Plastic cups to raise the piece above the table. So the panel weight is not focused on the glued band. - Electronic temperature control - Foot pedal cutting system - CE standards Optional for an extra charge available - Vitap glue 2 kg - Vitap glue 10 kg

Puntuación vio IMA -controlable

Unidad de corte de precisión IMA Tipo: 08.376

Unidad de ranurado IMA Tipo: 08.181 - solo ranuras laterales

Unidad de ranurado / corte de precisión Marca: IMA

Unidad para corte de precisión Marca: IMA

Unidad de encolado IMA completo con cargador de doble bobina, dispositivo de aplicación de pegamento y Zona de presión

Campanas acústicas para encoladoras de cantos IMA en varias versiones y dimensiones disponibles en stock Modificaciones / nuevo lacado disponible por un recargo.

Unidades de lijado Marca: Heesemann Tipo: M2

Unidad de lijado Marca: HOMAG Tipo: PS10

Unidad de fresado IMA - Versión pesada - Altura de 600 mm - Motores según lo solicitado Precio a consultar (dependiendo del equipamiento)

Granulate supply Make: ADOLPH Type: G-Trans 25 for continuous granulate supply on edge banding machines technical details: System for a machine line with 4 pre-melters (standard) Pos.1.1 1 basic unit for bag-emptying G-Trans® 25 Portal for Big-Bags with hanging emptying: Solid steel frame in 40 mm square-tube profile, torsion-stiff welded construction, main pillars with base plate for dowel-anchorage. Solid steel welded construction in square-tube profile, with fork-lift lugs, 4 hooks and tapered guide pins for easy touchdown on the portal. Sufficient stability for 1.500 kg weight. Supporting area with bars and stacking corners. Material container in powder-coated steel, with cone for free-flowing bulk materials. Filler plug diam. 300 mm. Filler opening 350 x 350 mm with sliding cover. 5/8 plugs for granules transport NW 25 Stack frame  ...

Unidad de pulido oscilante HOMAG

Rodillo de púas WEHRMANN para un mejor pegado madera maciza / contrachapado

Dispositivo de rotura de rayas IMA

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit prices for glue pots with bayonet adapter: for one gluing unit: EUR 6,666.00 for two gluing units: EUR 9,999.00 Delivery time: approx. 4 weeks

Unidad de pulido - 1 motor

precalentador de PU IMA 2,5 kg

Rascador de perfiles de radio IMA 08.263