trabajo con chapas de metal usadas para la venta (3,277)

Auction-ID: A1-44095-66

Auction-ID: A7-43697-3

Auction-ID: A1-44095-84

Capacidad: 120 x 6 mm Auction-ID: A1-43691-90

Grosor de la placa: 6 mm. Presión: 18 t. Longitud de la pala: 220 mmangle ajustable de - a: 90 Superficie gradable: 1100 x 950 mm, longitud de chaflón: 835 mm, consumo total de potencia: kWpeso de la máquina, aprox. 1,1 tdimensiones: 1,2 x 0,8 x 1,4 m. Máquina combinada: bordes y muescas, interruptor de pie- Interruptor de parada de emergencia. Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Tasa de ictus 160-800 1/min, incluyendo la carcasa Auction-ID: A1-44095-1

Auction-ID: A1-44095-85

Prensa hidráulica para crimpar mangueras hidráulicas, equipada con todos los dados necesarios para mangueras 0. De 5 a 50 mm, nunca usadas 0 horas, empaquetadas en caja de madera Dimensiones totales: 1000 x 800 x 1000 mm Peso: 270 kg Auction-ID: A7-43971-60

Prensa hidráulica para abrir tuberías hidráulicas, equipada con todos los troqueles necesarios para tuberías de 0,5 a 50 mm, nunca se utilizó a 0 horas y se empaquetó en una caja de madera Dimensiones totales: 1000 x 1000 x 1400 mm Peso: 310 kg Auction-ID: A7-43971-228

Potencia del motor: 4 kW Rango máximo tope de profundidad (Y): 500 mm Rango máximo tope lateral (X): 1000 mm Fuerza máxima de corte: 280 kN (400 kN) Diámetro máximo de punzonado: 105 mm Espesor máximo de chapa: 6 mm Área de trabajo: 500 x 1000 mm Tamaño máximo de chapa (con giro): 1000 x 2000 mm Longitud de carrera (ajustable ): 0 – 40 mm Auction-ID: A7-44061-1

Fabricante: Modelo HACO: PPH 30110Año: 1990Tipo: CNC Hidráulico de prensa de freno: CNCControl: Cybelec DNC 60 (Año 2004) Freno de prensa hidráulico CNC para operaciones de flexión de chapa metálica. Máquina robusta y probada, adecuada para trabajos industriales de chapa metálica, equipada con un sistema de control numérico Cybelec DNC 60 para la gestión de ejes y ciclos de curvatura. Características principales:• Fuerza máxima de flexión: 110 toneladas• Longitud útil de flexión: 3.100 mm• Paso entre postes verticales: 2.590 mm• Profundidad de cuello de ganso: 250 mm• Altura de trabajo: 910 mm• Ancho de mesa: 150 mm• Velocidad de aproximación: 10 mm/s Equipamiento listado: • Control numérico Cybelec DNC 60• Retromanómetro motorizado• Herramientas compatibles Amada /Promecam Condición: Máquina usada, vendida según la descripción del vendedor. Auc ...

Ancho máximo de la banda 200 mm, capacidad de carga 150 kg, velocidad de la cinta 5-25 m/min Auction-ID: A1-44095-90

Ancho máximo de la banda 200 mm, capacidad de carga 150 kg, velocidad de la cinta 5-25 m/min Auction-ID: A1-44095-101

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 174688 €: 3301.6 €: 3 kW: Manueller Tisch : 16 mm: 8 mm: 8 mm: 5 mm: 8 mm: 3060 x 1530 mm: 3060 mm: 1530 mm: 140 mm: 3048 x 1524 mm: 160 kg/m²: 90 m/min: 90 m/min: 127 m/min: 14 m/s²: +/- 0,05 mm: +/- 0,05 mmThe HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible.The manually extendable table is moved out of the side of the machine for loading and unloading.The cutting head has automatic focus adjustment.This makes the system a particularly economical, fast and very easy to operate production machine.The system consists of the following components:Manual loading and unloading tableEncapsulated cutting room with protective glazingCNC graphic control with touchscreenLaser source Brilase Premium DRM-8 F150Cutting head with automatic focu ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 29000 €: 553.9 €: 2050 mm: 4 mm: 42 1/min: 750 mm: 7.5 kW: 800 mm: 450 mm: 2700 mm: 2300 mm: 1350 mm: 2800 kgmotorizedback gauge atrecirculating ballscrew with Control DT5hold down with rubber padsSide Lay with T-Slot2 Sheet support armsball in the tabletape measuretilting stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ca. 12 - 14 Wochen ab Auf : Türkei : 20000 €: 5 mm: 1200 mm: 2,2+0,75 kW: 4,1 m/min: 3000 mm: 750 mm: 1400 mm: 1350 kg: 250 / 2000 mm: 300 mmMobile control panelHydraulic clamp on centerGearbox motor with brakeMotorized sheet centering systemInside cutting systemAccording to EC safety regulationsOperating manualOptional equipment: 1 spare blade set € 1.200,00 Flanging attachment with 1 set rolls € 2.000,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090086 : prompt, Zwischenverkauf v : Türkei : 7400 €: 142.82 €: 1 : 197 mm: 4 mm: 2 mm: 20 1/min: 90 °: 4 kW: 890 mm: 780 mm: 1115 mm: 550 kgHydraulic driveAutomatic adjustment of the blade gap2 downholder2 gauges angle adjustableProtection cover, acrylic glassFoot pedalWaste boxAccording to ",CE", regulations User manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 26300 €: 502.33 €: 2050 mm: 4 mm: 4 mm: 3 mm: 3 mm: 2 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 2,2 + 1,1 kW: 3800 mm: 1150 mm: 1110 mm: 2450 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

open-circuit voltage: 280 - 320 VDCcurrent intensivity: 30 - 80 Aoutput voltage: 140 VDCcutting medium: Air / Nitrogen total power requirement: ca. 11,2 kWweight of the machine ca.: 40 kgdimensions of the machine ca.: 0,90 x 0,35 x 0,50 mPlasma Cutting MachineHYPERTHERM - Hypertherm Powermax 1100incl.HYPERTHERM RT 80 hand torch- Recommended cutting capacity: 22 mm- Maximum cutting capacity: 29 mm- Severing capacity: 38 mm- Gas: Air or nitrogen- Gas inlet pressure: 6.1 bar- Gas flow rate: 189 l/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2530 mmplate thickness: 2.50 mmthickness at Niro-steel: 1.50 mmno. of strokes: 34 Hub/mincutting angle: 1.7 Gradtable height: 820 mmdistance between columns: 2620 mmControl: konv. engine output: 4.0 kWweight of the machine ca.: 1350 kg.range L-W-H: 3100 x 1980 x 1400 mmFeatures:- robust / motorized swing cut guillotine shears- unbreakable and torsion-free welded steel construction- compact and clear machine construction- manual backgauge, with analog display Adjustable from the rear stepless adjustment over the entire travel range- all-steel blade, double-edged- 1x hold-down bar- 1x long side stop- 2x front support arms- Support/working table with 10 mm spaced grooves- Selector switch for single and continuous stroke- 1x freely movable foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3200 mmplate thickness: 3.0 mm STthickness at Niro-steel: 2.0 mmOpening width / upper beam: 300 mmspeed: OW 40.0 mm/secBending beam adjustment: 80.0 mmspeed: BW 90.0 Grad/secwork height max.: 900 mmcontrol: MULTIBEND 5000 back stop - adjustable: 10 - 1550 mmaccuracy +/-: 0.1 mmair pressure: 5.0 barNumber of working hours: ca. 1.000 htotal power requirement: 2x 4.0 kWvoltage: 400 Vweight: 4400 kgrange L-W-H: 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours () good condition () Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=VP6emx4HTYM! Maximum flexibility when bending cassettes, boxes and profiles! High flexibility in bending part design! High productivity and throughput! Easy to useEquipment:- motorized universal swivel bending machine RAS 73.30 high-precision mechanics with  ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 11500 €: 220.8 €: 1 : 55 to: 500 mm: 40 x 10 mm: 37 1/min: 5 kW: 1550 mm: 1200 mm: 1950 mm: 1150 kghydraulic drivetable with gaugeuser manual in GERMAN and ENGLISHCNC options on requestWe have a big stock of punches and dies for immediate dispatchWE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 48100 €: 918.71 €: 2550 mm: 9 mm: 9 mm: 7 mm: 7 mm: 5 mm: 220 mm: 220 mm: 160 mm: 1,5 / 6 m/min: 5.5 kW: 4900 mm: 1150 mm: 1250 mm: 4600 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recomme ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55900 €: 1056.51 €: 3100 mm: 9 mm: 8 mm: 7 mm: 7 mm: 5 mm: 245 mm: 245 mm: 180 mm: 1,5 / 6 m/min: 7.5 kW: 5350 mm: 1600 mm: 1470 mm: 6850 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recomm ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 35900 €: 685.69 €: 2035 mm: 2.5 mm: Hydraulisch : 135 °: 3000 mm: 1100 mm: 1750 mm: 2100 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rules(sample photo)ALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 3810 €: 1020 mm: 1,5 mm: 500 mm: 1950 mm: 1000 mm: 1150 mm: 420 kg Construcción de acero soldado con manómetro de soporte manual ajustable por volante manual de usuario en ENGLISH Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

: neu : 2025 : 090080 : prompt, Zwischenverkauf v : Türkei : 32100 €: 613.11 €: 1 : 3100 mm: 4 mm: 42 1/min: 1,5 °: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsball in the tabletape measuretilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090188 : prompt, Zwischenverkauf v : Türkei : 4290 €: 1 : 1250 mm: 1.5 mm: 500 mm: 2250 mm: 1000 mm: 1150 mm: 460 kgDEMO MACHINE - MINT CONDITIONwelded steel constructionwith manual hold down unitback gauge adjustable by handwheelusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090187 : prompt, Zwischenverkauf v : Türkei : 14400 €: 276.48 €: 1 : 1350 mm: 3 mm: 35 1/min: 550 mm: 3 kW: 2 Stk.: 850 mm: 400 mm: 1900 mm: 1350 mm: 1260 mm: 1060 kgmanualback gaugeautomatic sheet hold downhold down with rubber padsmoveable foot switchside lay2 supporting armslight barriers on the back of the machineuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 48500 €: 926.35 €: 3100 mm: 4.5 mm: Hydraulisch : 135 °: 4500 mm: 1750 mm: 1950 mm: 5500 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.