trabajo con chapas de metal usadas para la venta (3,284)

Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, dryer, infrared dryer, powder coating-Infrared dryer: used for powder coating slats/blinds production-Manufacturer: Himmel, type HA 5-2-9/500-Geared motor: WEG 0.37 kW-Dimensions: 880/1050/H2200 mm-Weight: 308 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch,-Manufacturer: Mubea, punching tool square Ø 55 mm-Type: Mubea 55 holder Ø 50 mm-Die: Ø 150 mm-Total dimensions: Ø 150 x 120 mm-Weight: 6,7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch,-Manufacturer: Mubea, punching tool square Ø 52 mm-Type: Mubea 52 holder Ø 50 mm-Die: Ø 150 mm-Total dimensions: Ø 150 x 125 mm-Weight: 6,8 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch,-Manufacturer: Mubea, punching tool square Ø 70 mm-Type: Mubea 70 2 holder Ø 50 mm-Die: Ø 150 mm-Total dimensions: Ø 150 x 120 mm-Weight: 5,9 kg

Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production-Length measuring device: used for slats/blinds production-Rotary encoder: Heidenhain ROD 426.003 - 1000-Pneumatic components: Manufacturer Festo-Dimensions: 350/400/H1130 mm-Weight: 80 kg

Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square-Manufacturer: RUS, square hole punch with tension screw-Size: 69 x 69 mm-Total dimensions: Ø 128 x 120 mm-Weight: 4.8 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch,-Manufacturer: Mubea, punching tool square Ø 70 mm-Type: Mubea 70 5-10 holder Ø 50 mm-Die: Ø 150 mm-Total dimensions: Ø 150 x 120 mm-Weight: 6.6 kg

Cordless riveting tool, blind rivet gun, blind rivets-Transfer in current condition as seen-The device works, the batteries are defective-without: batteries-Dimensions: 345/90/H250 mm-Weight: 5.3 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch,-Manufacturer: Mubea, punching tool Ø 60 mm-Type: Mubea 60 holder Ø 50 mm-Die: Ø 150 mm-Total dimensions: Ø 150 x 120 mm-Weight: 6.6 kg

weight max.: 40 tworkpiece diameter: 600 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Die holder, notching tool, punching tool, punch, punching die, punching punch,-Manufacturer: Mubea, punching tool square 95 x 95 mm-Type: Mubea 95 holder Ø 50 mm-Die: Ø 200 mm-Total dimensions: Ø 200 x 122 mm-Weight: 11.6 kg

profile bending machine, bending machine, pipe bending tool -Handover: in current condition as viewed -Accessories: 1 damaged pressing tool: 3/4, see photos -suitable for: pipe size 1/2 to 1 1/2 -Dimensions: 630/670/H440 mm -Weight: 36 kg

Hand lever shears, hand tin snips, tin snips, sheet metal snips-Scissors: 100 x 5 mm-Dimensions: 280/100/H980 mm-Weight: 10 kg

Press brake tool holder for bending tool, die, upper knife, upper tool-Tool holder: pressure plate intermediate holder for: press brake-Holder: hole spacing 100 mm-Dimensions: see photos-Quantity: 5 holders available-Price: per piece/minimum purchase 5 items.-Dimensions: 150/15/H50 mm-Weight: 0.6 kg/pc.

Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp-Manufacturer: Seebeck, sheet metal clamp screw clamp type 76-Clamping range: 20-40 mm-Load capacity: 12 t-Quantity: 2x clamps available-Dimensions: 330/90/H365 mm-Weight: 48 kg/pc.

A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation ...

Está disponible una cizalla de palanquilla Peddinghaus 214/200. Capacidad de corte: cuadrado: 70 mm, redondo: 80 mm, plano: 180 mm x 35 mm / 250 mm x 28 mm, peso: aprox. 5000 kg.

Está disponible una máquina de desbarbado con extracción. Anchura de paso: 1000 mm, espesor de la chapa: 20 mm, tamaño mínimo de la chapa X/Y: 150 mm/100 mm, nivel de potencia acústica: 82 dB(A), velocidad de alimentación: 4 m/min, dimensiones X/Y/Z: aprox. 2200 mm/1500 mm/1500 mm, peso: aprox. 1600 kg, horas de funcionamiento: 7152 h. Incluida la unidad de extracción P. Ries 330 D Lissmac, año de construcción: 2007, área de filtrado: 10 m², volumen de aire: 3300 m³/h, presión negativa: 33mbar. Documentación disponible.

Ancho de trabajo: 3050 mm, espesor del material: 6 mm, profundidad de garganta: 200 mm, ajuste del tope trasero: 1000 mm, potencia de accionamiento: 15kW, rango de ángulo de corte: 1-2, altura de la mesa: 900 mm. Dimensiones de la máquina X/Y/Z: aprox. 4100 mm/2300 mm/2100 mm, peso: aprox. 8500 kg. Es posible la inspección in situ.

Bending tool, matrix, upper knife, upper tool, upper beam-Bending tool: from Lotze HDZ swivel bending machine-Length 2678 mm-Hole spacing: 100mm M10-Dimensions: see the drawing in the photos-Dimension: 2678/6/H45 mm-Total weight: 5,6 kg

Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Está disponible una plegadora CNC Darley. Fuerza de prensado: 2000 kN, ancho de trabajo: 5200 mm, potencia: 15 kW, capacidad de aceite: 160 l, dimensiones de la máquina X / Y / Z: aprox. 5500 mm / 1900 mm / 3100 mm, peso: aprox. 20000 kg. Incluyendo herramientas y accesorios. Documentación disponible. Es posible la inspección in situ.

A Finn-Power CNC punching press is available. Press force: 300kN, max. workpiece width: 4061mm, max. workpiece length: 1528mm, max. workpiece thickness: 8mm, max. workpiece weight: 200kg, quick chuck X/Y: 80m/min/60m/min. Turret head positions: 20, turret head speed: 30rpm, tool type: thick turret, max. tool diameter: 89mm. Travel speed: 100m/min, drilling accuracy: 0.1mm, positioning accuracy: 0.08mm, oil tank capacity: 330l, max. operating pressure: 300bar. Machine dimensions X/Y/Z: approx. 5900mm/6300mm/2500mm, weight: approx. 13500kg, control: Siemens Sinumerik 840D. The table of the machine has been extended. Without machine housing. Documentation available. On-site inspection is possible.

Está disponible una punzonadora excéntrica de volante de inercia Drinns. Fuerza de prensado: 250 kN, distancia de la mesa de ariete: 230 mm, ajuste de carrera: 10 mm-65 mm, número de carreras: 145 carreras/min, velocidad del volante: 145 rpm, peso máximo de la herramienta: 190 kg, peso de la máquina: aprox. 2250 kg. Documentación disponible. Es posible la inspección in situ.

Está disponible un volteador de piezas en bruto para chapas en bruto. Dimensiones máx. de la pieza en bruto X/Y: 1600 mm/1100 mm, altura máxima de la pila de piezas en bruto: 190 mm, peso máximo de la pila: 1500 kg, inclinación máxima de la pila: 15, tiempo de ciclo con paletas: aprox. 30 s, dimensiones de la máquina X/Y/Z: aprox. 3500 mm/2500 mm/2500 mm, peso: aprox. 3000 kg. Documentación disponible. Es posible la inspección in situ.

Punching tool, punch, scraper, hold-down device-Handover: in current condition as seen-Bracket: Damage see photos-Scraper: hold-down device for punching-Receptacle: Ø26/22 x 210 mm-Dimensions: 315/125/H95 mm-Weight: 4.2 kg

Punching tool, punch, scraper, hold-down device-Scraper: hold-down device for punching-Holder: Ø22/25 x 215 mm-Dimensions: 315/65/H85 mm-Weight: 1.9 kg

Está disponible una máquina plegadora de chapa que incluye un transportador de rodillos con corte de longitud digital. Es posible una inspección in situ.

A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible.

Dispone de una punzonadora HMS. Fuerza de prensado: 250 t, altura de carrera: 40 mm, altura de instalación: 450 mm, ajuste del ariete: 20 mm, velocidad de carrera: 120 carreras/min, dimensiones totales del sistema X/Y/Z: aprox. 17000 mm/8000 mm/3500 mm. Incluido el procesamiento de bobinas y tiras. Documentación disponible. Es posible la inspección in situ. Se espera que esté disponible a partir de septiembre de 2025.