mandrinadoras y centros de mecanizado usadas para la venta (3,251)

X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible.

Computer monitor, control unit, control unit, keyboard, screen, control -Manufacturer: INONET -Type: Radiance-15 -Dimensions: 400/300/H45 mm -Weight: 3.5 kg

Recorrido X/Y/Z: 600 mm/500 mm/400 mm, dimensiones de la mesa X/Y: 900 mm/600 mm, montaje del husillo: SK40, velocidad: 6000 rpm, posiciones de la herramienta: 24, avance: 6 m/min, desplazamiento rápido: 15 m/min, dimensiones de la máquina X/Y/Z: aprox. 4000 mm/4000 mm/2700 mm, peso: aprox. 5000 kg. Es posible la inspección in situ.

Foot switch, safety foot switch, foot pedal, foot controller, foot remote controller, pedal controller, padal switch-Handover/sale: in the current condition as seen-Metal housing: See photos for damage-Manufacturer: SSUPOU, foot switch type F1-U1 UN-Plug: 3 pin-Dimension.: 220/177/H141.5 mm-Weight: 2.5 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Adapter sleeve: Morse taper sleeve MK6/5-Type: IMFCM 6/5 TGL 30-21-114-Quantity: 2x adapter sleeve available-Price: per piece-Dimensions: Ø 64/217 mm -Weight: 2.5 kg/piece

Recorrido X/Y/Z: 700 mm/500 mm/600 mm, velocidad: 6300 rpm, potencia: aprox. 10 kW, alimentación X/Y/Z: 4 m/min, recorrido rápido X/Y/Z: 10 m/8 m/10 m/min, dimensiones de la máquina X/Y/Z: aprox. 4500 mm/2300 mm/2500 mm, peso: aprox. 6000 kg, horas de funcionamiento: 65425h. Es posible la inspección in situ.

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Adapter sleeve: Morse taper sleeve MK3 7 pieces-Type: MK2/1 AMUCM2/1 TGL30-21-114-Dimensions: Ø 19 x 92 mm-Weight: 0.1 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve-Adapter sleeve: Morse taper sleeve-Type: Adapter MK2/3-Dimensions: Ø 36 x 196 mm-Weight: 0.7 kg

A CNC vertical machining center Akira Seiki is available. Travel X/Y/Z: 2060mm/850mm/815mm, spindle-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repetition accuracy: +/-0.005mm. Tool positions: 28, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Mitsubishi 70, documentation available. On-site inspection is possible.

A CNC vertical machining center Akira Performa with a counter bearing on the A-axis is available. Travel X/Y/Z: 2060mm/850mm/815mm, spindle-table distance: 120mm-935mm, table dimensions X/Y: 2150mm/800mm, max. table load: 3240kg. Spindle power: 42kW, speed: 8000rpm, tool holder: BT50, rapid traverse X/Y/Z: 36m/36m/30m/min, positioning accuracy: 0.015mm, repetition accuracy: +/-0.005mm. Tool positions: 28, max. tool diameter: 100mm/200mm, max. tool length: 350mm, max. tool weight: 15kg. Machine dimensions X/Y: approx. 5000mm/3550mm, weight: approx. 14500kg, control: Siemens 828, documentation available. On-site inspection is possible.

Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available.

Recorrido X/Y/Z: 1820 mm/350 mm/480 mm, dimensiones de la mesa X/Y: 1900 mm/450 mm, portaherramientas: SK40, velocidad: 12000 rpm, posiciones de la herramienta: 22, dimensiones X/Y/Z: aprox. 5100 mm/2800 mm/3100 mm, peso: aprox. 7000 kg, control: Heidenhain TNC 355.

multi-spindle head, multi-spindle drilling head, drilling gear-Multi-spindle head: 5 spindles-Hole: Shaft Ø 20 x 25 mm-Drill holder: Ø 6 mm-Dimensions: see photos-Total dimensions: Ø 120/165 mm-Weight: 2.0 kg

Control panel, operating unit, control board, operating panel, operating unit, keyboard, CNC control-Manufacturer: Deckel, control unit from milling machine Deckel FP4L-Transport dimensions: 1200/800/H220 mm-Weight: 33 kg

Computer cabinet, server cabinet, control cabinet, network server cabinet, computer housing-Manufacturer: RITTAL-Type: IT Solutions TE 7000-390-Field of view: 400 x 400 mm-Number: 1x cabinets available-Price: per piece-Dimensions: 600/600/H580 mm-Weight: 40 kg

Recorrido X/Y/Z: 2x 800 mm/600 mm/600 mm, velocidad: 4000 rpm, distancia de la punta del husillo de la mesa: 180 mm-780 mm, diámetro / longitud máx. de la herramienta: 85 mm / 135 mm, recorrido rápido X / Y / Z: 25 m / 25 m / 20 m / min, fuerza de avance: 9000N, superficie de sujeción al suelo: 2x 1000 mm / 500 mm. Dimensiones X / Y / Z: aprox. 6600 mm / 3000 mm / 3200 mm, peso: aprox. 18000 kg. Documentación disponible.

Drilling machine, drill press, pillar drill, column drill-Manufacturer: Flott, column drill type SB 23 pieces-Speed speeds: 200 - 2000 rpm, continuously variable via variator disc-Table size: 300 x 300 mm, travel 595 mm-Spindle holder: MK3 with drill chuck-Spindle stroke: 150 mm-Throat: 295 mm-Column: Ø 110 mm-Dimensions: 920/450/H1920 mm-Weight: 345 kg

Recorrido X/Y/Z: 700 mm/300 mm/1000 mm, recorrido rápido X/Y/Z: 4000 mm/4000 mm/2000 mm/min, método de perforación: ELB, número de husillos de perforación: 1, diámetro de perforación mínimo/máximo: 4 mm/30 mm, profundidad máxima de perforación: 1000 mm, dimensiones de la mesa X/Y: aprox. 850 mm/750 mm.

Diámetro de perforación: 2 mm-10 mm, profundidad máxima de perforación: 500 mm, método de perforación: ELB, velocidad: 8000 rpm. Dimensiones X/Y/Z: aprox. 2300 mm/1300 mm/1600 mm, peso: aprox. 2000 kg. Incluye refrigeración con filtro automático y transportador de virutas magnéticas.

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit-Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103-Circuit board: LEA SRL. Type LEA 1000 LEA 1002-Dimensions: 265/125/H100 mm-Weight: 2.0 kg

Recorrido X/Y/Z: 3200 mm/1400 mm/500 mm, dimensiones de la mesa X/Y: 3000 mm/1250 mm, ancho máximo de la pieza: 1500 mm. Velocidad: 10000 rpm, montaje del husillo: CAT50, potencia del husillo: 35 hp, posiciones de la herramienta: 30, dimensiones X/Y/Z: aprox. 8000 mm/4000 mm/3500 mm, peso: aprox. 24000 kg. Es posible la inspección in situ.

Recorrido X / Y / Z / W: 1000 mm / 900 mm / 800 mm / 710 mm, velocidad: 1400 rpm, diámetro del husillo: 90 mm, dimensiones de la mesa: 1250 mm / 1250 mm, carga máxima de la mesa: 3000 kg, potencia del motor: 7,5 kW. Dimensiones X/Y: aprox. 5500 mm/7500 mm, peso: aprox. 11000 kg, control: Newall DP700. Documentación disponible.

Longitud del brazo: 1000 mm, diámetro máximo de perforación acero/hierro fundido: 32 mm/40 mm, carrera del husillo: 250 mm, soporte del husillo: MK4, capacidad máxima de roscado: M20, distancia de la mesa del husillo mín./máx.: 270 mm/1040 mm, dimensiones de la mesa X/Y/Z: 1150 mm/800 mm, velocidad: 4500 rpm. Dimensiones de la máquina X/Y/Z: aprox. 1700 mm/1100 mm/2600 mm, peso: aprox. 2000 kg. El interruptor de parada de emergencia de la máquina está defectuoso. Documentación disponible. Es posible la inspección in situ.

Recorrido X/Y/Z: 5500 mm/1200 mm/1800 mm, indexación del cabezal de fresado: 2,5, potencia de accionamiento: 28 kW, velocidad del husillo: 4000 rpm, alimentación X/Y/Z: 25 m/min, diámetro de la mesa: 1600 mm, velocidad de la mesa: 250 rpm, peso máximo de la pieza de trabajo: 8000 kg, dimensiones del campo del panel X/Y/Z: 6000 mm/2000 mm/300 mm, peso de la máquina: aprox. 16500 kg, control: Heidenhain iTNC 530. Peso de la pieza: 8000 kg, dimensiones del campo del panel X/Y/Z: 6000 mm/2000 mm/300 mm, peso de la máquina: aprox. 16500 kg, control: Heidenhain iTNC 530. Incluye suministro de refrigerante interno y transportador de virutas. Documentación disponible. Es posible la inspección in situ.

Bench drill, bench drill, column drill, pillar drill-Manufacturer: Ixion, bench drill type BT 6-Clamping table: 290 x 225 mm-Travel: 150 mm-Spindle mount: drill chuck -Projection: 180 mm-Speeds: 1080 - 12000 rpm 8 levels-Column: diameter 75 mm-Spindle stroke: 60 mm, with fine stop-Motor: AEG 0.37 / 0.6 kW-Voltage: 380V-Dimensions: 640/330 / H740 mm-Weight: 92 kg

Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool ...

Está disponible un centro universal de fresado y taladrado CNC SHW. Recorrido X/Y/Z: 6000 mm/2100 mm/1500 mm, giro del cabezal de fresado: 180, desplazamiento rápido X/Y/Z: 8 m/min, velocidad: 4500 rpm, potencia del husillo: 31,5 kW, dimensiones de la máquina X/Y/Z: aprox. 11000 mm/9000 mm/6000 mm, peso: aprox. 44000 kg. Documentación disponible. Es posible la inspección in situ.

Número de cabezales de perforación: 4.

Recorrido X/Y/Z: 600 mm/410 mm/520 mm, dimensiones de la mesa X/Y: 840 mm/420 mm, velocidad del husillo: 6000 rpm, potencia del husillo: 8,5 kW, portaherramientas: SK40, posiciones de la herramienta: 22, desplazamiento rápido X/Y/Z: 36 m/36 m/20 m/min. Dimensiones de la máquina X/Y/Z: aprox. 2200 mm/2300 mm/2300 mm, peso: aprox. 2500 kg, control: Heidenhain TNC 426. Es posible una inspección in situ.

Travel X/Y/Z: 400mm/300mm/495mm, spindle center table distance: 25mm-325mm, spindle nose table distance: 125mm-620mm, rapid traverse: 24m/min, feed rate: 5m/min, spindle type: ball screw, spindle diameter: 36mm, speed: 6000rpm, spindle power: 5.5kW, spindle mount: BT40. Tool slots: 30, tool change time: 2.5s, clamping time: 7s, max. tool diameter/length: 110mm/250mm, max. tool weight: 8kg. Table dimensions X/Y: 315mm/315mm, table angle: 7.5°, table clamping force: 3400kg, max. workpiece weight: 150kg. Dimensions X/Y: approx. 1900mm/2300mm, weight: approx. 4500kg, control: Fanuc 0-M, operating hours: 732h, piece counter: 172776. Including cooling lubricant system and tool magazine with 30 places. Documentation available. On-site inspection is possible.