otras máquinas para el procesado de metales usadas para la venta (11,535)

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 90 mm -Edition: gray cast iron -Hole spacing: 160 mm -Tip height: 150 mm -Drawing with the photos -Number: 1x bezels available -Price: per piece -Dimensions: 430/230/H110 mm -Weight: 10 kg

tool holder, tool holder, milling holder, milling tool-Manufacturer: Komet, Mount: SK50-Type: AB 50x80x60 Ex CELL-0-Dimensions: 95/90/H185 mm-Weight: 3.7 kg

An originally packed and unused Tanabe rotary kiln with all necessary accessories is available. 1) Rotary kiln: length: 17m, height: 2400mm (+400mm/600mm increase), width including drive: 2600mm, heated zone X/Y: 700mm/8000mm, heating capacity: 200kW, max. temperature: 500°C-550°C (900°C possible with retort change and heating upgrade), feed: screw feeder, speed control of the rotary kiln: 0.5U-2U/min, weight: approx. 23500kg, including separate supply air heater. 2) Rotary tube cooler: length: 10600mm, height: 1600mm (+400mm/600mm increase), width including drive: 2200mm, cooled zone X/Y: 700mm/3500mm, cooling type: water cooling with water circuit, speed control: 1.1U-4.3U/min, outlet: rotary valve, weight: approx. 8200kg. 3) Exhaust air filter including exhaust air fan, HEPA filter and dust collector with a temperature tolerance of 250°C. Control system: Siemens system control for ...

Micrometer screws, micrometer screws, outside micrometers, outside micrometers-Manufacturer: Helios, outside micrometer-Measuring range: 0-25 mm-Reading: 0.01 mm-locking device-Number: 2x micrometer available-Price: per piece-other sizes: also available-Case dimensions: 150/75/H25 mm-Weight: 0.3 kg/piece

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 110 mm -Edition: gray cast iron -Hole spacing: 100 mm -Tip height: 70 mm -Drawing with the photos -Dimensions: 340/300/H150 mm -Weight: 18 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck-Manufacturer: Bilz/Gewefa thread cutting quick-change chuck MK2-Intake: Type Bilz WFLK 115 MK 2-Type: Gewefa 05.056.104 M4xØ4.5xØ3.4-Type: Bilz WES 1 BK 4.5x3.4 M 4-Type: Bilz WES 1 B 3.5x2.7 M 5-Total dimensions: 140/35/H120 mm-Weight: 0.7 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder-Milling holder: SK50 holder 2 pieces-Type: 50 x 27 x 630 mm-Dimensions each: Ø 100 x 845 mm-Price/Delivery: complete-Transport dimensions: 845/200/H100 mm-Weight: 21.2 kg/total

Un sistema de pintura completo está disponible. Componentes: (1) transportador aéreo, (2) área de pulverización/pared de cepillo, longitud: 4000 mm, ancho: 1500 mm, altura: 4800 mm, con quemador Maxon, tubo de succión, cajones para la eliminación de pintura seca, seis esteras de filtro, varios filtros, (3) área de evaporación, (4) cabina de secado, longitud: 6500 mm, ancho: 5200 mm, altura: 3150 mm, con quemador de gas Weishaupt WG10N / 1-D ZM-LN. Dimensiones totales del sistema: 24.000 mm/10.000 mm, potencia máxima: 45 kW. La documentación está disponible.

Micrometer screws, micrometer screws, outside micrometers, outside micrometers-Manufacturer: aba, outside micrometer-Measuring range: 0-25 mm-Reading: 0.01 mm-locking device-Number: 2x micrometer available-Price: per piece-other sizes: also available-Case dimensions: 175/90/H30 mm-Weight: 0.6 kg/pc.

Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange for: three-jaw chuck, four-jaw chuck, face plate-Outer diameter: 210 mm-Interior diameter: 80 mm-Short taper mount, cone size: 8-Hole circle: Ø 170/185 mm-Dimension: Ø 210/90 mm-Weight: 6 kg

tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve, Weldon reduction-Milling adapters: intermediate sleeves, 6 pieces-Type: SK40 MK4 5 pieces / SK40 MK3 1 piece-Price/Delivery: complete-Total transport dimensions: 190/135/H225 mm-Weight: 7.8 kg/total

A wire drawing unit is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 5000, year of manufacture: 1993, number of draws per block: 1, drawing drum diameter: 700mm, drawing force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spo ...

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 134 mm -Edition: gray cast iron -Intermediate dimension: 280 mm -Tip height: 250 mm -Drawing with the photos -Dimensions: 560/350/H440 mm -Weight: 36 kg

Bezel, stick, lynette -Max. Passage: Ø 65 mm -Tip height: 83 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 250/280/H65 mm -Weight: 6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chucks, soft-Jaw width: 24 mm-Dimensions: see photo technical. drawing-Total dimensions: 95/73/H68 mm-Total weight: 2,4 kg

thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus-Manufacturer: Alfred H. Schütte, self-opening thread cutting head with quick-change turning tool holder-Type: SH 3/4-Shaft: Ø 40 mm-Dimensions: 265/130/H160 mm-Weight: 7.1 kg

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 230/80/H650 mm -Weight: 3.4 kg

Ancho de tratamiento: 8 mm-12 mm, diámetro máximo del generador de plasma: 32 mm, longitud del generador de plasma: 210 mm, longitud del cable: 3 m, presión de entrada: 5bar-8bar, consumo de gas: aprox. 2 m³/h, potencia del generador: 300 W, frecuencia: aprox. 40 kHz, dimensiones X/Y/Z: aprox. 420 mm/140 mm/500 mm, control: manual/semiautomático, horas de funcionamiento: 81 h. Documentación disponible. Es posible la inspección in situ.

gauge block box, gauge blocks, gauge block holder, parallel support, parallel support pair, plane-parallel measuring leg-Manufacturer: Koba, parallel gauge block set-Gauge block holder: 0-200-Gauge block set: not complete, see photos for contents-Dimensions case: 545/210/H45 mm-Weight: 5.0 kg

Bezel, stick, lynette -Max. Passage: Ø 90 mm -Tip height: 100 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 280/280/H110 mm -Weight: 8 kg

thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus-Manufacturer: Alfred H. Schütte, self-opening thread cutting head-Type: SH 1 1/4-Shaft: Ø 40 x 100 mm-Dimensions: 170/155/H225 mm-Weight: 8.6 kg

Está disponible un horno tubular de alta temperatura Thermconcept. T. max.: 1700C, longitud calentada: 200 mm, diámetro/longitud del tubo: 60 mm/600 mm, potencia: 3,3 kW, dimensiones X/Y/Z: 460 mm/530 mm/830 mm. Documentación disponible.

Machine vice, stable vice, drill press vice -Vice: rotatable -Jaw width: 200 x 55 mm -Clamping depth: max. 170 mm -Dimensions: 600/270/H210mm -Weight: 81 kg

Height indicator, parallel indicator -Max. Working height: 300 mm -Hard metal needle -Dimensions: 175/60/H385 mm -Weight: 1.7 kg

Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Manufacturer: Stolle, clamping plate: with support ribs -Length: 2005 mm -Width: 1500 mm -Plate thickness: 40 mm -Plate: with support ribs -Transport dimensions: 1500/2005/H500 mm -Weight: 1800 kg

Está disponible un horno tubular plegable de Thermconcept. Temperatura máxima: 1100C, longitud calentada: 500mm, zona constante: 160mm, diámetro/longitud recomendada del tubo: 70mm/750mm, potencia: 3kW, dimensiones X/Y/Z: 650mm/500mm/510mm. Documentación disponible.

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 615/120/H75 mm -Weight: 2.7 kg

Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks-Manufacturer: Röhm Gamet, pneumatic clamping cylinder for power chucks-Mounting: Thread M60-Bolt circle: Ø 88 mm / M8-Dimensions: see photos-Dimensions: 267/185/H235 mm-Weight: 18.2 kg

Dimensiones internas X/Y/Z: 600 mm/900 mm/600 mm, temperatura nominal: 350 °C, capacidad de calentamiento: 13,5 kW, espacio útil: 0,32 m³, espacio total de vapor: 0,57 m³, caudal de aire de escape mínimo: 120 m³/h.

Tool holder, milling holder, milling tool -Number: 515x SK50 holders with tool holder from KOMET GEWEFA and others -Standard mount: ISO 7388-1 SK50 -Standard pull studs: ISO 7388-3 -various designs -Drill chuck: face chuck, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -Delivery complete as shown in the pictures -Dimensions: 10x Euro pallets -Weight: 2464 kg