usado CHIRON para la venta

This CHIRON MILL FA 800 vertical machining center was built in the year 2006 in Germany. it is equipped with a Siemens Sinumerik 840D control unit and has 5 axis. The machine has a spindle speed of 12000 rpm.

This CHIRON MILL 800 Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a SIEMENS SINUMERIK control unit and has 5 axis.

This CHIRON FZ15W Vertical Machining center was manufactured in the year 2001. It is equipped with a Siemens SINUMERIK 840D control unit and has 3 axis. There are 2 units available.

This CHIRON FZ15W Vertical Machining center was manufactured in the year 2002 in Germany. It is equipped with a Siemens SINUMERIK 840D control unit and has 4 axis.

This CHIRON MILL 2000 Vertical Machining centre was manufactured in the year 2005 in Germany. Contact us anytime for further questions.

equipped with KNOLL fitter installation, type: KF 150/500 ( 2014)

equipped with tool change magazine; including 1 KNOLL filter installation, including 1 Alexander Bürkle 6-axis handling robot unit (1000x1200x2050mm) type: KF 150/500 and chip discharge conveyor

equipped with 24 stations tool exchange magazine; including 1 Alexander Bürkle 6-axis handling robot unit (1000x1200x2050mm); 1 KNOLL filter installation, type KF 150/500 and chip discharge conveyor

x-travel:550 mm y-travel:300 mm z-travel:425 mm CNC-control:Sinumerik table-size:950 x 350 mm max. table load:500 kg spindle taper ISO:30 spindle turning speed range:20 - 10500 U/min spindle drive motor:5,5 kW tool change unit:12 Pos. coolant:inkl. voltage:380 V tool adaptor:Steilkegel 40 groove width:32/28 mm no. of flutes:3 rapid speed:40.000 mm/min total power requirement:15 kVA weight of the machine ca.:3,3 t chip conveyor:inkl. dimensions of the machine ca.:2000x 3000 x2500 mm Documents:vorhanden - Serial Number: 186 - 78 - Control: FANUC O-M - with various tool holders - coolant equipment

x-travel:550 mm y-travel:400 mm z-travel:360 mm control:Siemens Shopmill 840 D Tilting Axis A Angle:± 100 ° table surface area:Ø 280 mm Spindle RPM:20-12000 1/min spindle drive:9,5 / 14 kW Spindle Torque:90 Nm rapid travel x/y/z:60 mm/min tool magazin::48 HSK-A63 tool diameter:82 (125) mm weight of tools max.:5 kg Tool change time tool/tool, milling spindle:2,4 s total power requirement:15 kW weight of the machine ca.:8,2 t Dimensions (L/W/H):3,8 x 4,1 x 3,3 mm internal coolant system feed:10/20/30/40/50/60/70 bar Motoman robot:NX 100 This is a well maintained vertical 5-axis machining center with coolant through spindle 10-70 bar. Motoman Robot for parts loading

Description: travels: X-axis: 2000 mm Y-axis: 450 mm Z-axis: 630 mm control: SIEMENS Sinumerik 840D max. spindle speed: 12000 rpm. spindle power: 11 kW tool holder: SK40 number of tool places: 12  , transport dimensions: machine: 5800 x 2800 x 3000 transporter: 7200 x 1000 x 2200 mm aggregate: 2500 x 1600 x 2100 mm smaller unit: 1200 x 800 x 1800 mm protective foils: 2400 x 1400 x 1200 mm z-motion: 630 mm, x-motion: 2,000 mm, y-motion: 450 mm, control: SIEMENS Sinumerik 840D, taper: SK40, power capacity - spindle: 11 kW, toolchanger positions: 12, turning speed range: 12,000 rpm, weight approx.: 12,200 kg, Approx. Onsite Dimension. (l x w x h): 5,800 x 2,800 x 3,000 mm

Description: including scraper belt conveyor SIEMENS SINUMERIK 840 D control system Spindle speeds 10500 1/min x-path 550 mm y-path 300 mm z-path 425 mm Rapid traverse: 30m/min Axes 4 Speed range 10500 1/min Spindle holder HSK 63 Tool changer 20 Pl Number of tools in the magazine 20 Pl Approx. Onsite Dimension. (l x w x h): 3,200 x 2,500 x 2,500 mm, weight approx.: 7,000 kg

CHIRON MODELO FZ18W MAGNUM 4 ejes Centro de mecanizado vertical con rotopallet y doble 4º eje 20 HERRAMIENTAS ISO 40 Cambio de herramienta: 2,1 seg Husillo: 20 - 8000 RPM, 18,5k kW X = 625 Y = 400 Z = 400 Rapids 40m/min Superficie de la mesa: 2 x 900 x 470 - TSUDAKOMA de servicio pesado doble 4º eje (Japón) 360.000 pos. - unidad hidráulica HAWE original - FANUC 0M 1995 Se puede inspeccionar bajo potencia en nuestro almacén Máquinas herramienta Mimu (Italia), X: 625, Y: 400, Z: 600, 4º eje: Sí, (2x) Tsudakoma 360 000 pos.

Chiron FZ15KS CENTRO DE MECANIZADO Vertical de ALTA VELOCIDAD Datos técnicos: Recorrido x: 550mm y: 400mm z: 360mm Buscador de dirección original de 4º eje CNC Siemens 840D Área de trabajo de mesa 1050 x 450mm Cambiador de herramientas 48x portaherramientas SK 40 Rango de velocidad hasta 12000 1/min Con 4º eje Renishaw control de rotura de herramientas IKZ Spaenefoerderer La máquina está en nuestro almacén, bajo potencia Mimu Machine Tools (Italia), X: 550mm, Y: 400mm, Z: 360mm, 4º eje: 360.000 pos, Renishaw: Sí

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)

Chiron FZ15KS HIGH SPEED, 4 axis vertical machining center, X: 550mm, Y: 400mm, Z: 360mm, 4th axis original Peiseler 360.000 pos, CNC Siemens 840D, Table 1050 x 450mm, Toolchanger 48 pockets, ISO 40, Spindle 12000 1/min, Renishaw tool control, Coolant through spindle, Hydraulic clamping, Swarf conveyor, Under power in our warehouse in Gussago BS, Mimu machine tools, Spindle: 12000 RPM, 4th axis: 360 000 pos

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.â ...

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Vertical machining center CHIRON FZ08W 2 pallets 12 HSK32 tools Spindle 15000 rpm HSK-32 rotopallet (2 pallets) CNC Fanuc 21iM chip conveyor The machine is under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing several mechanical operations with a single set-up on multiple surfaces of the same piece of work. It is generally equipped with several motion axes and one automatic tool exchange system and sometimes multiple pallets, CNC type: Fanuc 21iM, Number of pallets: 2, Spindle revolutions: 15000

Centro de mecanizado vertical de 4 ejes Chiron FZ15KS X: 550 mm Y: 400 mm Z: 360 mm Original Peiseler 4º eje Siemens 840D CNC Superficie de mesa 1050 x 450 mm Cambio de herramienta 48 post ISO 40 Velocidad del husillo hasta 12000 rpm con el detector de herramientas rotas Renishaw de 4º eje Refrigerante a través del transportador de virutas del husillo

Sinumerik 810M GA3 Basket tool changer: 20 x SK30 Tool change under 2 seconds. Spindle Max: 10500 rpm Table size: 2x (660mm x 350mm) Axes travel: X= 550mm Y= 300mm Z= 425mm B= 360 degrees (4th-axis) Under rotary table on the left: Yes. Coolant unit with Knoll swarf conveyor. Weight: 4000Kg CRT screen was upgreaded to TFT. Equiped with 1x 4th axis

X axis movement : 630 mm Y axis movement : 400 mm Z axis movement : 630 mm Double table Table size : 620 mm x 940 mm Machine has been used on aluminium

Chiron FZ08KW MAG Vertical Machining Center With 4th Axis Siemens 840D Control Unit 15 000 rpm Double table Double dividing head(Peiseler) Renishaw probe All maintenance has been done Chiron Turkey

Well-maintained machine from automotive parts series production (CPK capable) with reinforced spindle drive and Fanuc 18i CNC control. Kessler spindle max. torque (25%) 392 Nm 4th NC-axis Peiseler ZAS 280 distance 980 mm Milling capacity in St 60: 700 cm3/min Drilling capacity in St 60 with HM drill: 50 mm Thread cutting: M36 HSK 63A - 20 tools Chip to chip 2.1 s Speed 8,000 rpm Rapid traverse up to 60 m/min Acceleration up to 0.7 g Knoll coolant system PF50 with scraper belt conveyor and paper belt filter Coolant through spindle 30 bar Automatic doors front spindle bearing diameter 70 mm Tool tension 8 000 N X-axis travel 800 mm Traverse path Y-axis 520 mm Feed force X -/ Y-axis 5,000 N Travel Z-axis 630 mm Feed force Z-axis 10,000 N Gyuhsc Axis acceleration X, Y-axis / Z-axis 0.5 g / 0.7 g Rapid traverse speed 60 m / min Coolant through spindle up to 30 bar � ...

It’s had very little use over the last few years. Has to be the most productive machine in its class. YOM: 2001 Control: Fanuc 21iM Spindle: 15000 RPM Swarf Conveyor Includes all spindle tooling and custom Microloc work holding bases & clamps (as seen in the photos). We have all the manuals, operation, programming, maintenance, spares and electrical.

Chiron DZ 18 W Magnum Vertical Machining Center Double table Double spindle Machine is in good working condition

X : 630 mm Y : 400 mm Z : 425 mm Siemens control unit

X axis : 550 mm Y axis : 400 mm Z axis : 420 mm Double table Double Spindle Table size : 460/580 Spindle taper : HSK63 Fanuc Control Machine is in good condition

Longitud del palmo: 0 mm Anchura del pala: 0 mm X longitudinal: 0 mm Crucero Y: 0 mm Z vertical: 0 mm Número de palets: 0 Posiciones ATC: 0 Marca CNC: 0 CNC Modelo: 0 Control: GE Fanuc Series 18i-MB5 Ta horas de funcionamiento: 34031 Datos técnicos Número de eje total: 3 Número de husillos: 1 Largo de la mesa: 770 mm Anchura de la mesa: 290 mm Recorrido longitudinal (eje X): 450 mm Permodo transversal (eje y): 270 mm Permo recorrido vertical (eje z): 310 mm Foro de carga: 12 mm Máx. diámetro de la cinta M: 8 Cambiador de herramientas: Número de herramientas: 24 Diámetro de la herramienta máx.: 47 mm Diámetro con bolsillos adyacentes libres: 100 mm Largo de la herramienta: 160 mm Máx. peso de la herramienta: 1,2 kg Tiempo de cambio de herramienta: 0.8 / 2.3 seg Tarea de media de chip a chip: 2.2 seg Nariz de huso: HSK-A: 40 DIN 69893 Nócele de huso: sa partir: 30000 rpm Tr ...

Datos técnicosLarga de la mesa: 280 mmAnchura de la mesa: 280 mmVoltaje 50 Hz 3x: 400 VoltiosPotencia : 1,5 kWPeso de la máquina: 350 kgTamaño total de la máquina: Longitud: 800 mmVadura : 700 mmAltura : 2200 mmAccesorios variados: Déclanchement à deux mains

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 810 M Operating hours: 15198 Technical data Number of axis total: 3 Table length: 2280 mm Table width: 450 mm Number of T-channels: 3 Distance of the T-slots: 150 mm T-channel width: 18 mm Longitudinal travel (X-axis): 2000 mm Transversal travel (y-axis): 400 mm Vertical travel (z axis): 425 mm Tool changer: Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent pockets: 180 mm Tool lenght: 220 mm Max. tool-weight: 8 kg Spindle nose SK: 40 DIN 69871 Vertical spindle speeds: stepless from: 20 rpm up to: 10500 rpm Feeds: Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 18 kW Total power required: 31 kVA Machine´s weight about: 7200 kg Overall dimensions machine: Length: ...

Table length: 450 mm Table width: 300 mm Longitudinal X: 300 mm Cross Y: 250 mm Vertical Z: 250 mm Positions ATC: 12   Positions APC: 2   CNC Brand: Fanuc 3-axis CNC machine (VMC)CHIRON - FZ08W MACH-ID 7652 Make: CHIRON Type: FZ08W Control: Fanuc 21-M Year: 1998 Pallet changer 2 tables 450 x 300 x 75 Kg Workpiece rotation station 180 Gr Large Tooling package HSK-32 Coolant system 100 Liter X - Travel:              300mm Y - Travel:              250mm Z - Travel:              250mm Table Length:            450mm Table Width:             300mm Table load:              75 Feed rate X-Axis:        40000mm/min. Feed rate Y-Axis:    &nbs ...

Longitud de la mesa: 850 mmAnchura de la mesa: 470 mm X longitudinal: 630 mmCross Y: 400 mmMbre vertical: 425 mmPosiciones ATC: 20 Posiciones APC: 0 CNC Marca: _Unknown / Otros MACH-id    5417 HACER        QUIRÓN TIPO          FZ 18 W MAGNUM alta velocidad YOP            1997 características técnicas X - Recorrido        630 mm Y - Recorrido        400 mm Z - Recorrido        425 mm Longitud     de la mesa 850 mm Ancho      de la mesa 470 mm           Carga de mesa 250 Kg Velocidad de avance X-Axis       30.000 mm/min. Velocidad de alimentación Eje         Y 30.000 mm/min. Velocidad de avance Eje      ...

Longitud de la mesa: 950 mmAnchura de la mesa: 360 mm X longitudinal: 550 mmCross Y: 300 mmV vertical: 280 mmPosiciones ATC: 12 Posiciones APC: 0 CNC Marca: FanucCNC Modelo: OM MACH-id   3684 HACER    Quirón TIPO   FZ 12 S AÑO    1993 características técnicas X - Recorrido    550 mm Y - Recorrido    300 mm Z - Recorrido     280 mm cama / plano / portal / columna móvil machingcentre   vertical Controll    FANUC OM Longitud de la mesa x Ancho    950 x 360 mm Carga de mesa en kG    250 Kg Husillo cónico    Sk 40  Potencia de kW en el husillo   5,5 kW Velocidades / rangos   del husillo 7100 Rpm Cambiador de herramientas   ATC 12 ? Dimensiones Longitud   2920 mm Ancho    2 ...