usado DAEWOO para la venta

Description: Unused With cabin Approx. Onsite Dimension. (l x w x h): 2,400 x 1,500 x 1,890 mm, weight approx.: 780 kg

Description: unused in original packaging Approx. Onsite Dimension. (l x w x h): 690 x 335 x 575 mm, weight approx.: 38 kg

Description: max working pressure: 200 bar diesel-fired: yes Connection: 400 V net weight: 154 kg overall dimensions L: 1200 mm overall dimensions W: 740 mm overall dimensions H: 1020 mm description: unused Approx. Onsite Dimension. (l x w x h): 1,200 x 740 x 1,020 mm, weight approx.: 154 kg

Description: Attention: A vehicle with an access ramp is required for loading! Drive type: LPG Load capacity: 3.3 t Duplex full free lift mast FFT 3230 Lifting height: 3,230 mm Overall height retracted: 2,185 mm Free lift: approx. 1,475 mm Forks: 1,200 mm Oil-cooled disk brakes Further information: Brake actuation fully hydraulically assisted Continuously variable automatic transmission, electro-hydraulic Water-cooled Mitsubishi LPG engine, 4 cylinders Fully hydrostatic power steering Tires: 4-way superelastic, tire condition good (see photos) Approx. Onsite Dimension. (l x w x h): 2,500 x 1,300 x 2,150 mm, weight approx.: 5,750 kg

Description: Unused including 2 spare brushes anti dust system chain driven flashing light working hours 4/5hours 48v / 65 ah battery 6380m2 collecting container 80 liters brush motor 700W 0-10km/h Approx. Onsite Dimension. (l x w x h): 1,600 x 1,250 x 1,300 mm, weight approx.: 396 kg

Description: Serial Number: AV5E0317 Type: MYNX 500 YOM:2000 CNC HEIDENHAIN 410 3AXIS Travels , X: 1020 mm , Y: 510 mm , Z: 575 mm Rapid Feeds X: 24 m/min , Y: 24 m/min , Z: 20 m/min Spindle speed: 1-8000 rpm , Spindle distance from column: 520mm Ball screw :  ,Ø40xP12/Ø40xP10 ATC 20 Total Power:  ,11 kw Power source: 380 v 50 hz Rated capacity: 35 kva Installed power: 11kw Chip conveyor weight approx.: 7,500 kg, Approx. Onsite Dimension. (l x w x h): 4,300 x 2,990 x 2,870 mm

Description: mig type: yes tig type: yes AC/DC: yes inverter type: yes wire feed unit: yes digital readout: yes connection: 380 V manual available: yes machine weight: 45 kg dimension L: 1000 mm dimension B: 500 mm dimension H: 900 mm description: unused Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 900 mm, weight approx.: 45 kg

Description: Unused Rated power: 9 2 kVA Rated current: 14 A No-load voltage: 256 V Output current adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Insulation rating: F Protection rating: IP21 Arc start: Contact Approx. Onsite Dimension. (l x w x h): 375 x 155 x 300 mm, weight approx.: 7 kg

Description: state: unused and in original packaging maximum cutting thickness: max. cutting thickness 45 mm connection: 380 volt adjustable current: 30-120 amps starting: equipped with 'Pilot Arc' switch-on time: 60% duty cycle (120 A) technology: IGBT technology protection: circuit breaker Additional function: plug for CNC control Including: plasma torch accessories and protective cover. Approx. Onsite Dimension. (l x w x h): 535 x 210 x 380 mm, weight approx.: 15 kg

Description: Unused Outputs 2x 230V AC - 1x 12V DC 8A - USB 5V 1.0A/2.1A Technical Specifications Frequency 50Hz Watts 3500W Max watts 3800W AC current 15A Max. Height 1000m Performance class G1 Quality class A Max. Ambient temperature 40'c Power factor 1.0 Low power generator set Phase single-phase. Approx. Onsite Dimension. (l x w x h): 500 x 350 x 500 mm, weight approx.: 30 kg

Description: Unused outputs 2 x 230V usb 5v 1.0A/2.1A 1 x 12V DC 8A frequency 50HZ power 3800W AC current 15A maximum altitude 1000m performance class G1 quality class A max ambient temperature 40'c power factor 1.0 low power Approx. Onsite Dimension. (l x w x h): 550 x 320 x 470 mm, weight approx.: 22 kg

Description: unused power: 8 10 kVA connection: 400 V motor brand: Daewoo engine power: 11 kW generator output: 32 A hours read: 0 manual available: yes machine weight: 165 kg overall dimensions L: 880 mm overall dimensions B: 560 mm overall dimension H: 760 mm description: diesel consumes power current 400volt and 220volt Approx. Onsite Dimension. (l x w x h): 800 x 560 x 760 mm, weight approx.: 165 kg

Description: max working pressure: 200 bar diesel-fired: yes Connection: 400 V net weight: 154 kg overall dimensions L: 1200 mm overall dimensions W: 740 mm overall dimensions H: 1020 mm description: unused Approx. Onsite Dimension. (l x w x h): 1,200 x 740 x 1,020 mm, weight approx.: 154 kg

Description: Unused. Shrink range: 15-63mm Max opening: 75mm Voltage: 380V Wattage: 3000W Pressure: 53 5 Mpa Packing size: 780x540x1350 Weight Incl Packing: 280 Kg Approx. Onsite Dimension. (l x w x h): 1,220 x 710 x 500 mm, weight approx.: 246 kg

Description: Unused working width: 500 mm electric: yes hours read: 0 hours battery charger: yes Connection: 220 V net weight: 160 kg overall dimensions L: 1250 mm overall dimensions B: 550 mm overall dimensions H: 1150 mm description: including battery s 220 volt charger included Approx. Onsite Dimension. (l x w x h): 1,250 x 550 x 1,150 mm, weight approx.: 160 kg

Description: Diesel generator with minor sheet metal damage. - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled - Mobile. - Low oil level alarm with autostop function. Rated power 8.1 kVA Voltage 400 / 230 V Frequency 50Hz Tank volume 15 l Motor power 11 / 15 KW / HP Machine weight approx. 0.165 t Space requirement approx. 0.88 x 0.56 x 0.76m Approx. Onsite Dimension. (l x w x h): 880 x 560 x 760 mm, weight approx.: 165 kg

Description: Unused Rated power: 5 5 kVA Rated current: 25 A No-load voltage: 243 V Output voltage: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic duration factor: 40% Efficiency: 70% Insulation rating: F Protection rating: IP21 Arc start: Contact Approx. Onsite Dimension. (l x w x h): 375 x 155 x 300 mm, weight approx.: 7 kg

Description: Unused Rated power: 9 2 kVA Rated current: 14 A No-load voltage: 256 V Output current adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Insulation rating: F Protection degree: IP21 Arc start: Contact Approx. Onsite Dimension. (l x w x h): 535 x 210 x 380 mm, weight approx.: 15 kg

Description: state: unused and in original packaging maximum cutting thickness: max. cutting thickness 45 mm connection: 380 volt adjustable current: 30-120 amps starting: equipped with 'Pilot Arc' switch-on time: 60% duty cycle (120 A) technology: IGBT technology protection: circuit breaker Additional function: plug for CNC control Including: plasma torch accessories and protective cover. Approx. Onsite Dimension. (l x w x h): 690 x 335 x 575 mm, weight approx.: 38 kg

This 3-Axis Daewoo PUMA 400B lathe was manufactured in 2006 and is controlled by a FANUC 21i-TB unit. It features an X travel of 362mm and a Z travel of 1105mm, equipped with a tailstock for versatile machining options. The lathe can hold up to 10 tools and includes standard equipment such as a chip conveyor and external workpiece cooling. This machine represents a reliable asset for efficient and precise metalworking. Contact us for further details regarding this lathe.

This 4-Axis Daewoo ACE-HP 4000 vertical machining centre was manufactured in 2006, controlled by a FANUC Series 18i-MB system. It features comprehensive travel dimensions: 600mm in X, 560mm in Y, and 565mm in Z, along with table rotation capability. The machine is equipped with spindle cooling, a chip conveyor, and external workpiece cooling, ensuring optimal operation. A robust choice for precision machining, it combines extensive operating hours with dependable performance. Reach out for further details regarding this vertical machining centre.

centro di lavoro verticale 2 pallet, DAEWOO ACE VC500, SPECIFICHE TECNICHE, Modello CNC Fanuc, Versione del CNC 18-M, Attacco utensile iso 40, Potenza mandrino 15 Kw, Numero Giri mandrino 10000, Numero utensili 30, Corsa Asse X 760 mm, Corsa Asse Y 510 mm, Corsa Asse Z 570 mm, Cambio pallet si, Dimensione pallet 860x560 mm, Carico massimo consentito 300 Kg, Rotopallet si, Alta pressione refrigerante si, Evacuatore truciolo a tappeto, Marca Daewoo, Modello ACE VC500, Anno costruzione 2000, DIMENSIONI E PESO, Lunghezza 3600 mm, Larghezza 3700 mm, Altezza 2935 mm, Peso 9200 Kg, The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with sever ...

Fanuc CNC model Version of the CNC 18i - T Main spindle nose ASA 8 Main spindle power 15 Kw Turning diameter 350 mm Turning length 536 mm Main spindle rpm 3500 Number of tool holder turrets 1 Number of tool places first turret 12 Number of fixed tool places first turret 12 First turret X-axis travel 220 mm Z axis travel first turret 580 mm Linear axis rapid feeds X Y Z 30 m/min Counter spindle yes Number of counter spindle revolutions 6000 Bar passage 90 mm Counter spindle Z stroke 500 mm

DAEWOO PUMA 8S cnc lathe the machine is of USA origin therefore 220 three-phase it was tested after unloading for 5 years, with a transformer that I no longer own, it was working, new spindle never installed

Daewoo Puma 15 2-axis lathe (700x1500) Self-centering is an autoblock dia. 500

Control type FANUC iSERIES X axis stroke 820 mm Y-axis travel 410 mm Z axis stroke 510 mm Controlled axes 4 (fourth axis set up) Tool turret 20 positions Spindle speed 80/8000 rpm ISO 40 tool holder cone Motor power 9/11 kW Rapid advances : 24 m/min. Command handwheel Chip collection tank Year of installation 2001 CE Weight : Kg. 5.500 Complete with all documentation

Table dimensions: 1200x500 mm Max allowed weight on table: 800 kgs Traverses: Longitudinal traverse: 1020 mm Cross traverse: 510 mm Vertical traverse: 625 mm Spindle taper: BT 40 Speed range: 8000 rpm Equipped with: Electronic handwheel RANDOM tool changer 24 units Internal coolant supply