usado DURMA para la venta

sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 3,73 t dimensions of the machine ca.: 3700 x 2300 x 1350mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 2,35 t dimensions of the machine ca.: 1580 x 1200 x 1410 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16 total power requirement: 37 kW weight of the machine ca.: 23,81 t dimensions of the machine ca.: 6560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm pre-bending: siehe TD total power requirement: 3 kW weight of the machine ca.: 1,06 t dimensions of the machine ca.: 1260 x 1350 x 1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1000 x 700 x 1380mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD total power requirement: 18,5 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4260 x 1660 x 1590mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: siehe TD 0: 20mm (s) Ampullen/h 0: mm 0: mm total power requirement: 22 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 4260 x 1660 x 1590 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 120 kW weight of the machine ca.: 78 t dimensions of the machine ca.: 6100 x 5150 x 4300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6mm total power requirement: 11 kW weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4880 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 800 x 700 x 1200mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 30 kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2000x1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 3,23 t dimensions of the machine ca.: 3200 x 2300 x 1350 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ancho de chapa: 3000 mm espesor de placa: 10 mm distancia entre columnas: mm queque de potencia total: kW peso de la máquina ca.: 9,8 t dimensiones de la máquina ca.: 4,15 x 3,55 x 2 m Marca: Durma Tipo: DHGM 3010 Año de la marca: 2002 La longitud de la nuja: 3.000 mm Tensor de la placa: 10 mm Mandaque eléctrico Materias dimensionales de la máquina (lxwxh): 4.150 x 3.550 x 2.000 mm Fuso de la mechilla: 9.800 kg

presión: t calefuente de la máquina: mm distancia entre columnas: mm Control: queque de potencia total: kW peso de la máquina ca.: t dimensiones de la máquina ca.: m Marca: Durma Tipo: HAP 35200 Capacidad: 200 T Talla longitud de la cama: 3.550 mm Distancia entre columnas: 3.100 mm Acerba: 185 mm Calidades de la máquina: 2.400 x 4.800 x 2.850 mm Peso de la máquina: 13.300 kg

Presión: 160 t Chaflán Longitud: 3550 mm Carrera: 200 mm Cantidad de aceite: 150 l Peso de la máquina aprox.: 11400 kg Dimensiones de la máquina aprox.: 4700x2100x2700 mm

Ancho de la hoja: 3100 mm Espesor de la placa: 4 mm Ángulo de corte: 1 Tope trasero de 30' - ajustable: 750 mm Peso de la máquina aprox.: 3800 kg

pressure: 160 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 200 mm throat: 350 mm ajustment speed: 100 mm/sec working feed: 9.0 mm/sec return speed: 86.0 mm/sec Control: DU 6000 work height max.: 910 mm table width: 240 mm oil volume: 150 l total power requirement: 15.0 kW weight: 9820 kg range L-W-H: 4200 x 2100 x 2700 mm New price ~ 60.000 euros Special price on request Furnishing: - electro-hydraulic CNC press brake Stress-relieved steel structure body = durable monoblock frame - DURMA DU 6000 CNC control (CYBELEC) Swivel operation, front right Positioning of the back gauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Possibility of programming various programs - CNC controlled axes: Y1 + Y2 + X - CNC electro-motorized back gauge (X axis) 2x manually adjustable stop fingers including lateral and height adjustment (Z+R axis) - m ...

sheet width: 2550 mm plate thickness: 4,0 mm distance between columns: 2600 mm back stop - adjustable: 750 mm no. of strokes: 42 Hub/min cutting angle: 1°30 table width: 450 mm table height: 800 mm total power requirement: 7,5 kW weight of the machine ca.: 3230 kg dimensions of the machine ca.: 3200 x 2300 x 1350 mm Current new price with special accessories ~ 33.000 euros from a maintenance workshop / good condition () Furnishing: - robust / powerful mechanical guillotine shears - electric backgauge, with ball screws - with DURMA NC control - model D-Touch 7 Control unit with touchscreen function 128 MB internal memory (programming possible) Multilingual (English, Turkish, German) INCH/metric conversion - manual cutting gap adjustment, from the front analogue display of the material thickness - 1x extra long side stop 2.000 mm, with support foot & T-slot - 2x support arms - Ball ...

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm distance between columns: 3120 mm down holder: 16 Stück oil volume: 200 ltr. cutting angle: 1°50 no. of strokes: 13 Hub/min control: ENC 100M table width: 580 mm throat: 50,0 mm total power requirement: 22,0 KW weight: 9300 kg range L-W-H: 4200 x 2250 x 2100 mm from a maintenance workshop New price ~ 55.000 euros -------------------------------------------------- robust electro-hydraulic oscillating shears with DURMA ENC 100M NC control Manual cutting gap adjustment, via eccentric -------------------------------------------------- Furnishing: - electro-hydraulic oscillating shears - with DURMA ENC 100M control Backgauge preselection - X axis Number of pieces Cutting length limitation Swivel control, left front - motorized backgauge, travel = 1.000 mm (X axis) on ball screws Travel speed 200 mm/sec. ...

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3120 mm down holder: 16 Stück oil volume: 200 ltr. cutting angle: 1° 30 no. of strokes: 15 Hub/min control: ENC 100 table width: 500 mm throat: 50.0 mm Number of working hours: 912 h total power requirement: 15.0 KW weight: 7650 kg range L-W-H: 3810 x 2200 x 2050 mm from a maintenance workshop () very good / well-maintained condition (as new) with only 912 operating hours current new price ~ 45.000 euros Special price on request -------------------------------------------------- NC electro-hydraulic swing cutting shear with DURMA ENC 100M control manual cutting gap adjustment Incl. pneumatic sheet metal holding device for thin sheet metal cuts -------------------------------------------------- Furnishing: - robust electro-hydraulic swing cutting shears - including DURMA ENC 1 ...

Capacity: 175 t Folding length: 3050 mm CNC Brand: Delem CNC Model: DELEM DA-56 Max. bending length:        3050mm Distance between column:    2600mm Max. pressing force:        175T Dis. Beam - Table:          530mm Beam stroke:                265mm Table Width:                104mm Troth beam:                 450mm Approch speed:              160mm/min. Working speed:              10mm/min. Return speed:               100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  4 Crowning:                  ...

Espesor de la hoja: 6,00 mmvoid: 0Longitud de la mesa: 3100 mmAnchura de la mesa: 3100 mmLarga longitud de la navaja: 6 mm MACH-id  4149 HACER       DURMA TIPO         SB 3006 AÑO        2007 características técnicas Controll     ENC 100 Guillotina / Lazer / Mesa de corte        Guillotina Espesor      máximo de chapa 6 mm Garganta       350 mm Carrera de backgauge X en mm      1000 mm Dimensiones Longitud    3850 mm Ancho     3000 mm Altura    2000 mm

Espesor de la hoja: 16,00 mmLarga de inclinación: 4100 mmNúmero de rollos: 4 Anchura de laminación:                 4.100 mm < de fabricación /> Espesor de laminación 3x toproll: 10mm Espesor de rodadura 5x toproll: 16mm Predoblamiento del espesor de laminación:  13 mm Rollo superior:                    400mm Rollo inferior:                 370mm Rollo lateral:                   290mm Número de rollos:               4 Velocidad de rodadura:                 5m / min Soporte superior:                   Sí  Soportes laterales:    &nbs ...

This Durma MS 2504 shearing machine, from 2006, is tailored for efficient shearing with a maximum cutting thickness of 4mm and a cutting length of 2550mm. The machine dimensions stand at 3100 × 1700 × 1350 mm and it weighs 3230 kg, ensuring sturdy operation during extensive usage. Designed primarily for sheet metal applications, it remains operational and under power, ready to handle a diverse range of shearing tasks. For more information about this Durma shearing machine, please reach out to us.

Durma 4 Kw Fiber Laser Cutting Machine 3000 mm x 1500 mm Machine is in very good condition

Durma CNC press brake All details in the catalog attached 1 meter extra area for front leverage arms. Just 1 meter park area means 12.000 euro extra

Cutting table : 3000 mm x 1500 mm Precitec cutting head 2000 W 2 x automatic tables

Capacity 3080 x 6mm Delem DAC 350 cnc control Elevated table at the rear

Capacity 3100 x 6 mm Pneumatic elevation table at the rear ENC 100 M control

Technical parameters: - max. capacity: 20 t - max. sheet thickness for punching: 6 mm - max. sheet thickness for punching: 4 mm - max. stroke for punching: 25 mm - max. sheet weight at max. speed: 100 kg - table working height: 980 mm - table width: 2400 x 3600 mm - engine: 7.5 kW - number of tools in Multimatrix: 6 - basic tools included in the price of the machine - axis movement: X 2000 mm Y 1250 mm - axis speed: X 90 m/min Y 70 m/min Control system: Siemens Sinumerik 840 DI Machine dimensions (L x W x H): 3600 x 4100 x 2450 mm Machine weight: 11,100 kg The machine is in very good condition.

Capacity 3050 x 6 mm Electrically adjustable back gauge

Durma HD-FL 3015 2,0 kW 2011 r (fiber) Durma HD-FL 3015 laser cutting machine 2011

Durma TP9 CNC Punch Press Machine is in good condition Tools and dryer included in the price

Durma SBT 3010 CNC Guillotine Shear Machine is in very good condition

Durma PL-C 3060 oxygen and plasma cutting machine 3000x6000

Durma TP93 Hydraulic CNC Punch Press 30 Ton Machine isi n good condition Mate tools included

Durma HD-F 4020 Laser Cutting Machine Power : 6000 W 4000 mm x 2000 mm All maintenance has been done by Durmazlar Only air cut has been done(no oxygen or any other cutting done) Machine has been cut maximum 1.5 mm

Hydraulic press brake: DURMA type E30200, rb: 2010. Bending length: 3100 mm; Between columns: 2650 mm Stroke: 210 mm; Pressure: 200 t CNC controlled press Cybelec DU6000, controlled axes -Y1-Y2-X; R + CNC Wila Moducrown table bending compensation. Fiessler AKAS laser workspace protection. Machine weight 12.5 t. 18 kW drives. Central lubrication of slides and guides. Tools - set of tools syst. Amada for 3100 mm. Original DTR, Bi&S workstation manual. Under current only 352 rhours, new machine condition. For the machine we offer service, commissioning, operator training, etc.

Cutting length : 6100 mm Max. cutting thickness : 16 mm All maintenance has been done recently Motorized table is included in the offer

Folding length : 3000 mm 220 Ton Machine is in good condition

Durma HD-FS 3015 CNC Laser Cutting Machine 4 Kw 3000 mm x 1500 mm Please contact us for further pictures(picture on product page is sample)

Durma AD-R 30220 CNC Press Brake 220 Ton Machine is in good working condition

Capacity 3100 x 6 mm Pneumatic elevation table at the rear ENC 100 M control

Power : 4 KW All maintenance has been done regularly DC040 Rofin resonator

Durma VS 3020 CNC Guillotine Shear Maximum cutting thickness : 20 mm Cybelec control unit Stroke : 190 mm Number of cut per minute : 7-13 Machine is in good working condition

Durma AD-S 30135 CNC Press Brake 135 Ton Folding length : 3050 mm Machine is in excellent condition Number of axis : 6 Working hour : 2095

Durma AD-S 40400 CNC Press Brake 400 Ton Folding length : 4000 mm Machine is in good working condition

Durma PP6 1250 x 30 CNC Punch Press 30 Ton Metal length : 1250 mm Machine is in good condition

Cutting length : 3000 mm Maximum cutting thickness : 6 mm Machine is in good condition Machine can be sold as set with press brake : https://www.makinaalsat/makinalar/172773/durmazlar-abkant-pres

Bending length : 7000 mm 400 Ton Machine is in excellent condition