TIG welding rod, welding wire Universally applicable TIG welding rod for root and joint welding on unalloyed and low-alloy steels, general structural steels, fine-grain structural steels and pressure vessel steels, Suitability tested down to -40 °C. -net weight: 5 kg -Number: 7x package available -Price: per package -Weight complete: 5.3 kg/package
wire electrode, welding wire, welding wire -Welding wire: Filarc PZ6125 -Diameter: 1.2mm -Dimensions: O 300 /100 mm -Weight roll: 16 kg
welding current: 5 - 160 A connected load frequency: 230 V weight: 7,9 kg Dimensions (LxWxH): 310 x 140 x 230 mm Scope of delivery: TIG welding machine Buddy TIG 160 Electrode and earth cable 3m TIG torch ET 17 4m Gas hose with union nut The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
corriente de soldadura: 10 - 180 A tensión de circuito de apertura: V frecuencia de carga conectada: 230 V peso: 6,8 kg Medidas (LxWxH): 403 x 153 x 264 mm Accesorios para máquina de soldadura de gas inerte: Paquete de manguera 4m. Cable de tierra 4m Accesorios para máquina de soldadura de gas inerte: paquete de hose 4m. Cable de tierra 4m Calón de soldadura 1 rollo, Caliómetro de presión Cable de soldadura 1 rollo, Calgador de presión Con boquilla y boquilla de gas Precio de lista: 2200, -EUR
intensidad de corriente: 400 A tensión de circuito libre: 65-75 V CLASE DE PROTECCIÓN IP: IP21 Carga permisible al 35% ciclo de trabajo 400 A at 60% ciclo de trabajo 315 A at 100% ciclo de trabajo 250 A Potencia de la batería 0,49 kW Clase de aplicación: S - Refrigerado por agua - Con control remoto manual y de pie - Incluido el paquete de manguera aprox. 6000 mm
table width: 6000 mm table length: 27000 mm burner heads: 5 cutting width: 4000 mm control: Vison T5 Vers. 4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC Gantry Flame Cutting Machine Incl. extraction Cutting range 24 x 4 m Total table size 27 x 6 m Marking unit 4 oxyacetylene burners (mixed gas) and a 3-phase unit (acetylene). The respective conversion kits to the standard version are still available. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Altura máxima de ajuste: 6000 mmMarcha del brazo de arranque: 3000 mm ESPECIFICACIONES Altura de la torre de soldadura / pluma 6000 mm Longitud del brazo 3000 mm Número / Fuente de alimentación en AMP 1000 AMP
Rango de amperaje máximo: 0 Rango de amperaje mínimo: 0 A alineación para secciones de una línea en crecimiento ideal para torre eólica, embarcación, molinos de tuberías con bogie ferroviario accionado Capacidad de carga por tramo:30 + 30 T Rango de recipientes Mínimo: 1500 Rango de recipientes Máximo: 6500 Nº de ruedas por tramo:4 Número de piezas coincidentes:2 Longitud: 4.500 mm Ancho: 2.200 mm Altura: 1.000 mm Peso: 2885 + 3885 kg
Peso de la pieza de trabajo: 0 kgEje controlado por número: 0 Diámetro mínimo de la pieza de trabajo: 0 mmFrente de respuesta máximo: 0 mm (1) Simple / (2) Doble pinza: 2 MACH-id 5355 HACER ESAB TIPO GANTRAC 14000 YOP 2013 Dimensiones Longitud 16.000 mm Ancho 2.000 mm Altura 2.000 mm
Peso de la pieza de trabajo: 0 kgDiámetro máximo de la pieza: 0 mmTanchura de la pieza de trabajo mínimo: 0 mmNúmero de rollos: 0 MACH-id 3597 MAKE Esab Pema Finlandia TIPO 60 TS AÑO 1997
Peso de la pieza de trabajo: 0 kgDiámetro de la mesa: 0 mm MACH - ID 6224 Tipo: SEAMER SM2-2000 YOP: 1990 Potencia nominal 60 %500 Amp Potencia del evaluador 100 %400 Amp Ancho de sujeción 1600 mm Producto mínimo aprox. 180 mm Producto máximo aprox. 960 mm Alimentador ESAB A6 ESAB A10 – MED 44 Fuente de alimentación ESAB LAH 500 Longitud3.000 mm Ancho1.600 mm Altura2.200 mm
Welding rectifier: A10-355K, welding process: MIG/MAG, power connection: 3-phase, 220/380V, 50 Hz or 220V, 60 Hz, output range: 50A/15V to 355A/29V. Duty cycle: 355A/29V at 20%, 315A/30V at 60%, 280A/28V at 80%, 250A/27V at 100%. Open-circuit voltage: 17-39V, current at 220V: 41A at 50%, 34A at 60%. Current at 380V: 24A at 50%, 20A at 60%, weight: 175kg.
Working table dimensions: 1500x3000mm, including filtration system and Plasma Device HYPERTHERM Powermax 1000.
With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible.
Suprarex 3500 (width 3500mm) with plasma M3 of the second generation (G2) and with WIC (water clearance for the possibility of cutting under water). The machine was bought mainly for cutting stainless steel. Of course, it can also cut carbon steel or aluminum (it can only be cut separately). Basic consumable parts for the burner are also included. The machine was practically never used and cut for a total of 1 hour (started up and tested).
ESAB SXE-PI 3500 LH PT-24 plasma / oxy-fuel cutting system N.3 TORCHES AND N.1 PLASMA TORCH CUT FROM mm 1 TO mm 200 MAX SHEET 2500x3000
The machine is available for immediate delivery. The suction table is not included.
An annual (bought new in 2021) ESAB migomat for sale. We sell due to the liquidation of the production workshop. A great, almost new machine, used by us for welding aluminum and steel sheets and sections. The machine is designed for an intensive work cycle - for work that requires long operation. The device is complete (with a handle - 1 pc, coolant, mass cable, etc. - without gas cylinder), ready to work. Possibility to see / check.
ESAB LAE 800 welding device The machine is located in France.
This ESAB Suprarex SXE 5000 Plasma Cutting Machine was manufactured in the year 2012 in Germany. It is equipped with a ESAB control unit with english main language. This machine has a Kjellberg main drive. It can be included 2 Kjellberg HiFocus 280i Plasma Sources and 2 Kjellberg KWE 360 Hot Wire Units with the machine.
This ESAB SXE-P14500 SUPRAREX Plasma Cutting Machine was made in 2008. It is equipped with an ESAB Vision 52 control unit.
This ESAB Suprarex SXE-HD 3500 Plasma Cuttting Machine was manufactured in the year 2014 in Germany and has 10 production hours.
E-soldador ESAB tipo LTG 250 Soldador de electrodo de varilla Masch. N° 736-820-387 Año de construcción 1997 Potencia 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Ajuste de potencia: infinitamente variable - soporte de electrodo con cable de conexión de 6 metros- ventilador de CC - refrigeración por aire- posiblemente también posible soldadura TIG, sin paquete de manguera Conexión a la red 380 voltios, 50 Hz, 32 amperios. Requisito de espacio del enchufe L x W x H 1200 x 750 x 1050 mm Peso 180 kg buen estado El dispositivo también fue diseñado originalmente para soldadura TIG. El paquete de manguera para soldadura TIG no está disponible y la función no ha sido probada. La refrigeración por agua era para el paquete de manguera para soldadura TIG. Por lo tanto, el dispositivo se vende solo como una máquina de soldadura de electrodos.; usado
Ref.: 10195 Fabricante: ESAB Lugar de almacenamiento: Halberstadt País de origen: Suecia Número de serie: 620-703-3544