usado GILDEMEISTER para la venta

Swing ober bed/ slide: 600/ 360mm, center height: 350mm, bed width: 450mm, width: 2050mm, height: 2000mm, weight: 7,4t, including documentation, various tool holders, two stands, base jaws, counter tips and various spare parts.

CONTROLS   CNC controls SIEMENS 840 D MIT SHOPTURN BASIC FUNCTIONS   number of spindles: 1   number of turrets: 1   live positions: yes   number of c-axes: 1   number of y-axes: 1 WORKING RANGE TURNING   swing diameter (max): 500 mm   turning diameter (max): 330 mm   bar diameter (max): 51 mm MAIN SPINDLE   spindle revolutions (min): 20 /min   spindle revolutions (max): 6000 /min   drive power S1 100%: 12 kW   spindle torque S1 100%: 115 Nm   spindle diameter: 100 mm   c-axis: yes X/Z SLIDE   Z-axis travel: 450 mm   X-axis travel: 202 mm   Y-axis travel: 80 mm   rapid traverse Z: 30000 mm/min   rapid traverse X: 24000 mm/min   rapid traverse Y: 10000 mm/min   tool f ...

This Gildemeister TWIN 32 lathe was built in the year 2001 in Germany. It is equipped with a SIEMENS Sinumerik 840D control unit. The machine has a main spindle speed of 8000 rpm. 2 units are available.

This Gildemeister Sprint 65 linear Lathe was manufactured in the year 2008 in Italy and has 22399 production hours. It is equipped with a DMG FANUC 310 i control unit. The machine has a spindle speed of 5000 rpm.

This GILDEMEISTER CTX 420 V6 linear Lathe was made in 2007 and has 10282 production hours, of which 6954 are working hours. It is controlled by a SIEMENS 840D POWERLINE control unit. The machine has a spindle speed of 6000 rpm.

This GILDEMEISTER CTX 310 Lathe was made in 2003. It is equipped with a HEIDENHAIN DataPilot 4290 control unit. The machine has a spindle speed of 5000 rpm. Its technical condition is normal with an accuracy of 0.01 mm. Throughout the years it was continuously maintained. In 2022, the main drive card and main engine were replaced. In December 2022, the main spindle bearings were exchanged. The replacement was made with new parts. The basic machine is equipped with a hydraulic chuck. Full documentation is available.

This Gildemeister sprint 65 linear Lathe was manufactured in the year 2007 in Italy. It is equipped with a DMG FANUC 310 i control unit. The machine has a spindle speed of 5000 rpm.

This 7-axis Gildemeister TWIN 65 lathe was manufactured in 2004. It is equipped with a Sinumerik 840D control system and features both a main and counter spindle with speeds up to 5000 rpm. The primary spindle drive offers a robust 35 kW of power, while the counter spindle delivers 26 kW, accommodating a rotation working range of Ø 250 mm for the main and Ø 120 mm for the counter spindle. Additionally, this lathe includes a bar feeder with a maximum diameter capacity of 62 mm. The Gildemeister TWIN 65 machine we have for sale is ideal for efficient, high-precision manufacturing. Reach out for more information about this lathe.

This GILDEMEISTER CTX 400 E Lathe was manufactured in the year 1999 in Germany. It is equipped with a HEIDENHAIN CNC control and single driven tool. The working width is approx. 635 mm and the through-hole diameter ø50 mm through the head. It has 2 axes: z = 635 mm and x = 220 mm.

This Gildemeister Sprint 42 linear Lathe was made in the year 2006. It is equipped with a Fanuc 160i control unit. The machine has a spindle speed of 6500 rpm.

This Gildemeister CTX 400 S2 Lathe was manufactured in the year 1998 in Germany and has 65655 production hours. It is equipped with a HEIDENHAIN CNC PILOT 3190/4290 control unit. The machine has a spindle speed of 25-5000 rpm.

This GILDEMEISTER CTX 400 Serie 2 Lathe was manufactured in the year 1998. It is equipped with a DIN Plus Turn Plus control. It disposes of a turret with 12 tool positions and a tailstock.

This Gildemeister NEF 710 Lathe was manufactured in 1998. It is equipped with Siemens 1 PH7137 main drive (rpm 2000). This machine has a tip height of 345mm and a tip width of 2000mm. It has a spindle bore of 92mm, a maximum torque of 1050 kN and a maximum chuck of 400mm. Contact us anytime for further information.

Maximum diameter 25 mm Number of tools 6 Type of CNC Siemens 840D Spindle speed 6000 rpm Spindle power9.1 kW Weight 7500 kg COMPLETE WITH BAR LOADER IEMCA SIR 25 YEAR 2005

Control CNC, control numérico, fabricado en GILDEMEISTER GDM 65/2A GILDEMEISTER tipo Eltropilot EP20 GD-2A Año de construcción 1989 Pedido: 150 299 Referencia: 0.854.183 Conexión a la red: rack de 220 VCA 50 Hz con 20 ranuras para módulos - 11 módulos integrados Dimensiones An x Al x P 480x 260 x 220 mm Peso aprox. 7 kg El control proviene de un torno Gildemeister GDM 42/2A. Otros componentes de Gildemeister se pueden encontrar bajo el número de stock: 60343, 60346, 60347; usado

bar material dia.:36 mm chuck diameter:100 mm turning length:580 mm greates pass round over bed:145 mm turning diameter:100 mm turning speeds:2x 25-8.000 1/min positive location each:2xC-Achse, 0,001° Grad Sub spindle:ja/yes turret (x-stations):2x 12-fach VDI 25 driven tools:2x 12 turning speeds:31-6.300 1/min control:Sinumerik 840 D total power requirement:50 kVA weight of the machine ca.:6 t dimensions of the machine ca.:4,8 x 2,2 x 2 m turning- milling center with 8-axis (X1:220mm, Z1:320mm, X2:120mm, Z2:340mm, Z3:380mm, C1, C2, Y-axis) high pressure pump 20bar, tailstock on right side, collet device on main and subspindle, parts conveyor, bar magazin IRCO Simag 42.1-R for 3,2m bars, chip conveyor, approx.109.700 hours "machine on", approx. 84.300 hours "spindle on"

turning diameter:700/410 mm turning length:800 mm speeds spindle 1:5000 1/min speeds spindle 2:6000 1/min Main spindle capacity:32/25 kW hollow clamping cylinder:77 mm y-Axis min./max.:+/- 100 mm tool magazin::48 Pos tool taper:HSK 63 milling head speed:12.000 1/min milling spindle drive:22,5 / 19 kW total power requirement:74 kVA dimensions of the machine ca.:6,50 x 2,68 x 2,00 m sub spindle power:14,5 / 12,5 kW CNC - Turnmill with B-axis (torque-motor) and subspindle, 5-axis simultaneously machining, alternating speed, MPC 1.0, 3-D touchprobe BLUM TC62, Main spindle ISM 76, C axis and brake Subspindle ISM 52, C axis and brake Partly hollow clamping device for subspindle ( D = 52 ), Differential pressure device for main- and subspindle coolant device 8/20bar, 20/25 l/min, paperfilter, coolant through subspindle, Chip conveyer, Chuck flushing device (main- and subspindle), oilmist suctio ...

swing diameter:320 mm control:840 D SIEMENS turning speeds:5000 1/min spindle drive:20 / 27 kW chucking diameter:250 mm travel -x axis:650 mm travel -z axis:300 mm turret head:12 Pos. tool holder:VDI 40 toolpiece turning speed range:4000 1/min work piece power:max. 11,7 kW weight of the machine ca.:8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on"

turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5 Documents:vorhanden

turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5

tool taper: 40 shaft cross cut:40 appr. 40 pieces axial driven tool taper with various cutters Used with Gildemeister GDM CNC lathe Sale as complete package or single, min. 5 pieces Price offered for complete package

Description: CNC control SIEMENS 840 D Turning length (max.) 330 mm Swing diameter (max.) 200 mm Center width 800 mm X-axis 1100 mm Z axis 300 mm Maximum partial weight 20 kg Spindle bore 56 mm Number of revolvers 12 Number of tools 8 Spindle speeds 7000 rpm Spindle motor power 11 kW weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,700 x 1,600 mm

Description: 1 used CNC turning and milling center Make: Gildemeister, model: CTX 420 V 3 with Heidenhain 4290 iT, built in 2004, turning diameter 565 mm Turning length 625 mm X-travel 260 mm Speed ​​range - main spindle 25 - 5000 rpm Drive power - main spindle 25 kW max. torque 270 Nm Spindle nose  ,170h5 Bar diameter 65 mm C-axis 0.001° turret stations 12 pos. Tool holder VDI 40 Powered tool stations 12 pos. Speed ​​driven tools 4500 rpm Drive power for powered tools 12 kW Tailstock holder MK 4, Rapid traverse X / Z 60 / 45 m/min Space requirement approx. with bar loader 7495 x 2484 x 1885 mm Accesories: Bar loader 3200 mm Iemca Master 880 MP-E chip conveyor Parts catcher Conveyor belt Measuring arm C axis driven tools collet chuck Tool package documentation data backup very well maintained machine control: Heidenhain 4290 iT, Approx. Onsite Dimension. (l x w x h): 7,500 x ...

Description: 1 used cycle lathe Make: Gildemeister Model: N.E.F. 320 K, built in 2004 Condition: very good Siemens control (touch) Swing diameter 320 mm Turning length 750 mm Speed ​​3500 rpm Drive power 9 kW Bar diameter 50 mm Tool holder Multifix size. b Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Accesories: 3 jaw chuck Forkardt 200 Tool package documentation Drehlänge: 750 mm, control: Siemens (Touch), turning speed range: 3,500 rpm, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 1,600 mm, weight approx.: 2,500 kg

Description: 1 used CNC lathe make: Gildemeister, model: CT 40, built in 1987 EPL 2 control Switch-on hours: 2250 hours. max. turning diameter 400 mm Turning length 600 mm Spindle holder 140h5 Spindle bore 72 mm Drive power 11 kW Speed ​​range continuously variable 20-4000 min Z rapid traverse/feed speed 10/5 m/min. X rapid traverse/feed speed 10/5 m/min. Recording VDI 30 Number of tool locations 12 Accesories: Manual chuck documentation Data backup. turning diameter: 400 mm, Drehlänge: 600 mm, Read off operating hours: 2,250 h, control: EPL 2, toolchanger positions: 12, spindle bore: 72 mm, turning speed range: 20-4000 rpm, weight approx.: 3,400 kg, Approx. Onsite Dimension. (l x w x h): 3,300 x 1,780 x 1,800 mm

Hydraulic power pack, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Gildemeister lathe -Drive: 1.1 kw -Speed: 1410 rpm -Max. Pressure: 25 bar -Liter output: l/min -Filter -Hydraulic tank -Dimensions: 500/680/H660 mm -Weight: 98 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 240 mm -Recording: MK4 -Dimensions: 560/255/H440 mm -Weight: 80 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 270 mm -Quill: electrically driven -Foot switch -Recording: MK5 -Number: 1x tailstocks available -Price: per piece -Dimensions: 820/250/H400 mm -Weight: 136 kg

This 8-axis lathe, manufactured in 2008, the DMG Gildemeister Sprint 50 Linear, features a Fanuc 300I control system, 3 turrets, a sub-spindle, and comes with a diverse set of tool holders: 4x Z driven, 3x X driven, and 3x adjustable/X driven. Including 74687 operational hours and 45426 production hours, it also comes with a box of electrical/spare parts and a bar loader from IEMCA (Boss 552-HD). Consider the opportunity the DMG Gildemeister Sprint 50 Linear lathe we have for sale represents. Contact us for further details.

Hydraulick pickup spindle pos. 6, Clutch for threading, Auto bar loader: Pietro Cucchi

Control: Siemens 840D Solution line, Auto bar loader: Top Automazioni XF 375

3 slides 3 revolvers with 12 positions each driven main and subspindle 2 C-axis Y axis, workpiece unloading device, high pressure coolant system with paper filter chip conveyor, Control: Fanuc 310i, Country of origin: Italy, Operating hours: 34.000 | 22.900, Number of spindles: 2, Number of linear axis + C axis: 8+2, Max bar diameter [mm]: 65, Spindle speed [rpm]: 5.000, Spindle motor [kW]: 20, Auto bar loader: Iemca Master 880 P/R, Machine weight approx. [kg]: 9.000

Gildemeister GD 16-5 - Estado superior, - Casquillo guía sincronizado, - 3off Life Tools Slide 1, - trabajo trasero, - transportador de virutas, - filtro de neblina de aceite, - cargador de barras Iemca Smart 316

Gildemeister GMC20 ONE, Options / Accessories, - 5 Cross-slides pos. 1;2;3;4;5, - 2 Radial slides pos. 6 for cutting and rear-working operations, - 1 C-axis for the pick up spindle, - Pneumatic work-piece unloading chute for pos. 6, - Work-piece conveyor belt, - Swarf conveyor, worm type, - 5x Frontal tool spindle, fix, - Pick- up spindle in pos. 6, - High pressure coolant device 70l / 50bar, Country of origin: Italy, Control: Siemens 840D, Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 9,1, Z - travel [mm]: 70 / 140, Total power requirement [kVA]: 98, Weight of the machine ca. [kg]: 9.800, Auto bar loader: Cucchi Giovanni DBM.625

Gildemeister GM 16-6AC, 4x diapositiva compuesta - Pos.1; Pos.2; Pos.4; Pos.5, 4x alimentación indipenden - Pos.1; Pos.2; Pos.4; Pos.5, dispositivo de roscado, 1x husillo de roscado, husillo de recogida, dispositivo de brochado, juego de levas, juego de pinzas, cargador de barras Cucchi Giovanni (YOM 2004), Horas de trabajo: 13.600

CNC multi spindle bar automatic, Gildemeister GMC 35 ISM, - 6 integretat spidles with C-axis, - 5 compound slides pos. 1; 2; 3, 4; 5;, - intipendend feed for central block, - douple slide in pos. 6, - pick-up spindle in pos. 6, - 5 frontal spindles, rotating, with internal coolant supply, ISO 40, - swarf conveyor, - Fire fihthing system CO2, - ARTIS tool breakage control system, Stangenlademagazin :, Cucchi Pietro PB 41 Compact, Country of origin: Italy, Control: Siemens 840D, Operating hours: 56.000, Number of spindles: 6, Max bar diameter [mm]: 35, Spindle speed [rpm]: 6.000, Spindle motor [kW]: 21, Total power requirement [kVA]: 107, Auto bar loader: Cucchi Pietro PB 41 Compact

Control: Fanuc 310 i, Diámetro máximo de la barra [mm]: 25, Número de eje lineal + eje C: 6 + 2, Velocidad del husillo [rpm]: 10.000, Motor del husillo [kW]: 3,7, Z - recorrido [mm]: 80 | 300, X - recorrido mm: 50 | 240, Y - recorrido [mm]: 350 | 120, Refrigerante de alta presión: 20 bar, Cargador automático de barras: FMB Turbo 3-26/3200, Peso de la máquina aprox. [kg]: 3.800

6 barras de husillo automáticas Gildemeister GM32, husillo axial 5x (pos. 1, 2, 3, 4, 5), husillo de recogida pos. 6, pos. 6 de doble deslizamiento, gruppo frizioni por filetarte, 4x accionamiento axial (pos. 1, 2, 4, 5), corredera compuesta con accionamiento pos. 5, cinta transportadora para piezas terminadas, transportador de virutas, tipo de tornillo sinfín, Número de husillos: 6, Diámetro máximo de la barra [mm]: 32, cargador automático de barras: Pietro Cucchi

6 spindle bar automatic Gildemeister GS20, compound slide with drive in pos. 1, compound slide with drive in pos. 2, compound slide in pos. 4, compound slide in pos. 5, 4x axial spindle (pos. 1, 2, 4, 5), rotating milling device in pos. 3, pick-up spindle pos. 6, swing rear machining arm drive in pos. 3, swing rear machining arm drive in pos. 6, swarf coneveyor, worm type, set of tool holders, set of cams, Number of spindles: 6, Max bar diameter [mm]: 20, Max bar feed [mm]: 100, Spindle speed [rpm]: 214 - 5.168, Spindle motor [kW]: 11, Weight of the machine ca. [kg]: 5.000, Auto bar loader: Pietro Cucchi

6 husillo automático Gildemeister GM32, 5x husillo axial (pos. 1, 2, 3, 4, 5), husillo pick-up pos. 6, doble corredera pos. 6, gruppo frizioni per filettare, 4x accionamiento axial (pos. 1, 2, 4, 5), cinta transportadora para piezas acabadas, transportador de virutas, tipo tornillo sinfín, Número de husillos: 6, Diámetro máximo de la barra [mm]: 32, Cargador automático de barras: Pietro Cucchi

Multi Spindle Gildemeister AS 16 Max diameter 16 Number of spindles 6

The lathe is in good condition. Berg lathe chuck. Full technical documentation turret: 12 - VDI-40 tools max. spindle speed 4000 /min passage 90 mm max. roll 600mm max turning length 1000mm machine weight: 7.5 tons

Type designation: Gildemeister CTX 400 S2 Year of manufacture: 1999 Operating hours: 65.655,88 h Control: Heidenhain CNC Pilot 3190/4290 Special equipment: Software update Turn-Plus rapid traverse X/Z: 10m/15m Spindle speed: 25-5000 rpm Turret: Sauter 12-position turret, no driven tools Chuck: Power chuck SMW Autoblock Spindle passage: 0 Turning diameter: approx. 200 mm Turning length: max. 635 mm Tailstock/quill: available and mounted Chip conveyor: Yes, mounted Maschinenmaße: 4527x1940x1730mm Total weight: 5140 kg (incl. chip conveyor)

Gildemeister GMX 250 Linear The GMX 250 Linear is a turning-milling centre for producing rotational parts, type flange. It machines the complete part in one run without the operator interfering from a semi-finished part, for instance a cast part. In fact, from both sides using two clampers. The machine is able to turn, mill, drill, produce threads etc. Operating system – Heidenhain plus it with turnplus Working range Maximum turnable diameter 640 mm Maximum turnable diameter of the counter spindle 400 mm Distance between the spindles 1,500 mm Turntable length 1,185 mm Main drive Maximum output 28 kW Maximum speed 5,000 min-1 Maximum torque 320 Nm Tool magazine Number of tools in the magazine 46 Number of tools in the turret 12 Tool interface HSK 63, VDI 40 Main drive Maximum output 28 kW Maximum speed 5,000 min-1 Maximum torque 320 Nm

A new CTX 1250 TC turning / milling machining center with a milling spindle, counter spindle and bar feeder is on sale. The cost of the machine is discussed and indicated taking into account delivery to the enterprise, it is possible to provide a guarantee up to 6 months, commissioning and training. Basic machine B-A7255 CTX beta 1250 TC Universal lathe The maximum workable length is 1250 mm. - Main spindle: integrated motor spindle ISM 76 - Main AC drive 25/34 kW (100/40% ED), 5000 min-¹. - Open jig (hydr.) With an inner diameter of the draw tube of 67 mm. Clamping force 68 kN at max. P 45 bar. - C-axis with spindle brake (hydr.) - Cross slide with integrated milling and turning motor spindle with hydraulic clamping for turning operations, HSK-63A taper according to DIN 69893 - Y-axis ± 100 mm - B-axis ± 110 ° pneumatic clamping - Disk tool magazine for ...

Circulating diameter above the bed: 500 mm Revolving diameter above support: 290 mm Distance between spikes: 780 mm Spindle speed - range: 500 Chuck diameter: 170 mm Max. workpiece weight: 45 kg Largest turning diameter:: 200 mm Maximum turning length: : 500 mm Number of driven tools:: 12

Very good condition. Complete with chip scraper, driven tool, C-axis Low runtime (23520h) Technical data Swing over the bed: 500 mm Turning length: 600 mm Spindle speed: 20 - 5000 rpm Number of tools: 12 Hole: 72mm Tailstock quill diameter: 72 mm Tailstock sleeve stroke: 100 mm Total power requirement: 45KVA

Circulating diameter above the bed: 600 mm Spindle drilling: 74 mm Spindle speed range: 3000 Longitudinal stroke Z:: 1250 mm Transverse stroke X:: 398 mm Max. running diameter on sleds :: 480 mm

Type: Sprint 20 linear Parameters: Manufacturer: Gildemeister Year of production / SO / GO: 2006 / - / - Description: The machine is in good technical condition. Sold including bar feeder: 3m LNS express-220 Linear axis Z1: 80mm Linear axis X1: 35mm Linear axis Y1: 240mm Linear axis X2: 230mm Max. turning diameter: 20mm Tool body diameter: 20mm Number of fixed tools for external machining: 6 Machine dimensions: 2275 x 1300 x 1760mm Machine weight: 2600kg Upon agreement, the possibility of a tour in progress.