Modelo
(Fabricante: HBM)
saw-blade dia.: 210 mm Cutting height: 70 x 305 mm Cutting height at 45°: 35 x 305 mm saw blade turning speeds: 4500 U/min Motor output: 1,5 kW machine weight ab.: 9 kg Dimensions (L/W/H): 340 x 500 x 740 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
anchura de las tiras: 100 mm longitud de la banda: 915 mm dimensiones de la muela: 100 x 915 mm mesa de trabajo:: 225 x 155 mm Potencia total requerida: 0,44 kW peso de la máquina ca.: 0.018 t dimensiones de la máquina ca.: 0,56 x 0,26 x 0,3 m
rated capacity: 7,9 kVA rated current: 32/16 Ampere electrics - voltage/frequency: 230+400 / 50 V/Hz tank capacity: 12 l engine output: 13 PS total power requirement: 7,9 kW weight of the machine ca.: 0,152 t dimensions of the machine ca.: 0,95 x 0,55 x 0,8 m Diesel generator with: - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled - Mobile. - Direct injection - Low oil level alarm with auto-stop function. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
frecuencia de carga conectada: 230 V peso: 4,7 kg rango L-W-H: 620 x 240 x 180 mm desalpuerto: 0,8 KW dimensión de la banda de agarre: 40 x 760 mm diámetro del tubo máx.: 180 mm velocidad de banda: 2,4 - 9,1 m/s
ancho de chapa: 1270 mm espesor de la placa: 2,0 mm distancia entre columnas: 1300 mm abertura de luz de día: 48 mm : 135 reque de potencia total: Mano peso de la máquina aprox.: 0,4 t dimensiones de la máquina aprox.: 1,6 x 0,9 x 1,2 m Máquina dobladora de componentes Anchuras de los sectores: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 y 260 mm.
anchura de las tiras: 150 mm alga longitud de banda: 1220 mm dimensiones de la muela: 225 mm tabla de trabajo:: 150 x 400 mm Tablable inclinable hasta: 90 Grado solución de superficie de la mesa: 150 x 130 mm frecuencia de carga conectada: 230 V reunidad total de potencia: 0,75 kW peso de la máquina aprox.: 35 Kg dimensiones de la máquina ca.: 650 x 360 x 400 mm
ancho de material: 305 mm espesor del material: 1,0 mm velocidad: von Hand peso: 45 Kg dimensiones: 500 x 340 x 420 m Mecana de trabajo de chapa combinada con: - Flexión, anchos de herramienta 25 - 50 - 75 - 75 - 105 mm. - Rollos, diámetro del rollo 38 mm - tijeras, máx. 1015 x 1mm
0: 680 x 450 x 430 mm presión de funcionamiento: 3 - 6 bar Consumo de aire: 250 l/min. peso de la máquina aprox.: 28 Kg : 0,76 x 0,5 x ,75 cm
anchura de las tiras: 100 mm alterranura de banda: 915 mm dimensiones de la muela: 100 x 915 mm ta de trabajo:: 225 x 155 mm requiero de potencia total: 0,44 kW peso de la máquina aprox.: 0,018 t dimensiones de la máquina ca.: 0,56 x 0,26 x 0,3 m
range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
longitud de la mesa: 910 mm ancho de la mesa: 500 mm altura de la mesa: 350 - 1300 mm peso máx. en kg: 350 kg : 950 mm altura de la carrera: 1300 mm peso de la máquina ca.: 110 Kg dimensiones de la máquina ca.: 100 x 550 x 400 m
bore capacity in steel (diameter): 35 mm throat: 230 mm bore stroke: 125 mm spindle taper: ISO 40 spindle turning speed range: 115 - 1750 U/min : 560 mm : 175 mm table surface area: 1000 x 240 mm max. distance between table and spindle-nose: 375 mm connected load frequency: 400 V total power requirement: 0,85/1,5 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,3 x 1,2 x 2,1 m Domestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Left / right switch. Emergency stop switch Pivot head swiveling Spindle protection. Small toolbox Machine base and X-axis feed optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rango de molienda: 2 - 13 mm ángulo de curvas de nitidez mín./máx.: 90 - 140 Grado carga conectada: 230 V peso de la máquina aprox.: 10 Kg dimensiones de la máquina aprox.: 0,35 x 0,2 x 0,2 m
ancho del material: 1015 mm espesor del material: 1 mm velocidad: von Hand peso: 240 Kg medidas: 1420 x 600 x 750 m
anchura de las tiras: 75 mm alterroso de banda: 2000 mm velcidad de banda: 30 m/seg imámenes de potencia total: 3 kW peso de la máquina aprox.: 70 t dimensiones de la máquina aprox.: 1,2 x 0,5 x 0,75 m
ancho de material: 300 mm Espesor del material: 2,0 mm : máx. 90 Peso de la grada : 12 Kg dimensiones: 400 x 250 x 100 m Máquina combinada de trabajo de chapa metálica con: - Doblado, anchos de herramienta 25 - 50 - 75 - 75 - 105 mm. - Rollos, diámetro del rollo 38 mm - tijeras, máx. 1015 x 1mm
range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ancho de las tiras: 100 mm largo de banda: 610 mm mesa de trabajo:: 170x125 / 265x150 mm : 16 mm velturas de giro: 2000 U/min diámetro del rollo: 16, 23, 29, 41 y 53 mm cargo de potencia total: 0,45 kW peso de la máquina ca.: 114 Kg dimensiones de la máquina ca.: 0,6 x 0,5 x 0,5 m
range L-W-H: 780 x 480 x 1050 mm weight: 79,5 kg : 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 , 3/8, 1/2 . Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
range L-W-H: 745 x 525 x 915 mm weight: 93,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 830 x 530 x 530 mm presión de funcionamiento: 2,2 - 5,5 bar Consumo de aire: 250 l/min. peso de la máquina ca.: 50 Kg : 0,95 x 0,65 x ,7 cm
diámetro: 200 mm altura: 105/265 mm altura central: 105 mm peso de la máquina aprox.: 41 kg dimensiones de la máquina ca.: 400 x 330 x 310 m
0: 945 x 605 x 605 mm presión de funcionamiento: 2,2 - 5,5 bar medidas: 1,0 x 0,61 x 1,65 m : 1300 x 1000 x 750 cm Consumo de aire: 250 l/min. peso de la máquina aprox.: 0,09 t
feed pressure: 8 bar Effective free air delivery: 120/85 L/min Receiver capacity: 30 Liter weight of the machine ca.: 50 kg. Number of cylinders: 2 0 motor: 230V / 0,75KW V / KW range L-W-H: 570 x 640 x 800 mm Quiet professional 30 liter compressor Noise level approx. 40 - 45 DB (A) This compressor is delivered as standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve at the bottom. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw-blade dia.: 305 mm Cutting height: 105 x 340 mm Cutting height at 45°: 60 x 340 mm saw blade turning speeds: 5000 U/min Motor output: 2,0 kW machine weight ab.: 25 kg Dimensions (L/W/H): 700 x 570 x 980 mm Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mm throat: 180 mm bore stroke: 85 mm spindle taper: MK 2 spindle diameter: 47 mm spindle turning speed range: 320 - 3300 U/min : 230 mm : 100 mm table surface area: 420 x 155 mm connected load frequency: 230 V : 900 x 600 x 300 cm total power requirement: 0,75 kW weight of the machine ca.: 8o Kg dimensions: 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 290 x 270 mm column diameter: 92 mm turning speeds: 150 - 2450 U/min feeds: 0 mm/U total power requirement: 1,1 kW weight of the machine ca.: 95 kg range L-W-H: 0,66 x 0,8 x 1,7 m Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
corriente de soldadura: 30 - 200 A frecuencia de carga conectada: 230 V peso: 3,6 kg Medidas (LxWxH): 290 x 135 x 2600 mm Scopio de entrega: tigadora de soldadura Buddy TIG 160 Electrodo y cable de tierra 3m TIG antorcha ET 17 4m Gas manguera con tuerca de unión
feed pressure: 8 bar Effective free air delivery: 85/120 L/min Receiver capacity: 10 l / 8 bar l / bar weight of the machine ca.: 21 kg. Number of cylinders: 2 Stk. motor: 230V / 0,75KW V / KW range L-W-H: 465 x 3800 x 575 mm This compressor is delivered as standard with: - Maintenance-free oil-free engine. - safety valve. - Reduction valve with pressure gauge and clutch. - Drain tap on the tank. - Italian compressor of the highest quality. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rated capacity: 2,6 / 3,0 KW rated current: 16/8,3 Ampere output voltage: 2 x 230AC / 1 x 12DC V tank capacity: 18 l engine output: 6,5 PS weight of the machine ca.: 45 Kg dimensions of the machine ca.: 0,68 x 0,58 x 0,54 m Exhibition machine The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 1170 x 880 x 825 mm presión de funcionamiento: 2,5 - 8,0 bar medidas: 1,33 x 1,24 x 1,77 m consumo de aire a 6 bar: 350 l/min peso de la máquina aprox.: 0,16 t
0: 1170 x 580 x 580 mm presión de funcionamiento: 2,2 - 8,0 bar medidas: 1,22 x 0,93 x 1,70 m consumo de aire a 6 bar: 350 l/min peso de la máquina aprox.: 0,15 t
turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 125 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 1,25 x 0,6 x 0,6 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK 2 spindle turning speed range: 50 - 3000 U/min : 280 mm : 155 mm table surface area: 500 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,8 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ancho de las tiras: 100 mm longitud de banda: 2000 mm velocidad de banda: 15/30 m/seg diámetro del tubo: 20 - 76 mm ángulo ajustable desde - hasta: 30 - 90 Grado frecuencia de carga conectada: 400 V potencia total requerida: 2,5 /3,3 kW peso de la máquina aprox.: 0,19 t dimensiones de la máquina ca.: 1,2 x 0,75 x 0,7 m
turning diameter over bed: 290 mm turning diameter over slide rest: 170 mm turning length: 750 mm turning speeds: 75 - 2000 U/min centre height: 145 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK tailstock quill stroke: 80 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 1,3 x 0,75 x 0,7 m 2-axis LCD digital display system (now new). Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
rango de molienda: 2 - 20 mm ángulo de curvas de afilar córner mín./máx.: 90 - 135 Grado carga conectada: 230 V peso de la máquina ca.: 8,6 Kg dimensiones de la máquina ca.: 0,35 x 0,2 x 0,2 m
feed pressure: 8 bar Effective free air delivery: 200 / 175 L/min Receiver capacity: 50 Liter weight of the machine ca.: 77 kg. Number of cylinders: 4 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 580 x 780 x 820 mm Quiet professional 30 liter compressor Noise level approx. 40 - 45 DB (A) This compressor is delivered as standard with: Safety valve, pressure reducing valve, pressure gauge, coupling and Drain valve at the bottom. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacidad 90 grados: redonda: 125 mm capacidad 90 grados: cuadrado: 125 mm : 127 x 125 mm dimensiones de la banda de sierra: 1435 x 12,7 x 0,65 mm nada velocidad de banda: 38 - 80 m/min queque de potencia total: 0,95 kW peso de la máquina aprox.: 18 kg dimensiones: 720 x 380 x 450 m
anchura de las tiras: 100 mm alterranje de banda: 915 mm dimensiones de la muela: 200 mm mesa de trabajo:: 170x125 / 265x150 mm requierto de potencia total: 0,5 kW peso de la máquina aprox.: 26 Kg dimensiones de la máquina ca.: 0,6 x 0,5 x 0,3 m
turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe with base cabinet 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Product description: Set welding current: 20-250 A. Phase 1, Duty cycle: 60%-250 A, Performance: 100% - 194 A. The diameter of the electrodes: 1.6 - 4.0 mm, The arc: Contact. Degree of protection: IP21S, welding label length: 2 m. Cooling: forced (fan). Size: 350x230x275mm Weight 5 kg.