thread dia.: M3 - M16 mm turning speeds: 300 U/min throat: 100 - 950 mm weight: 25 kg Pneumatic tapping machine up to M16, with a large radius. Supplied with various adapters, e.g. for drilling and a 90° adapter for tapping in all directions. Accessories: M3-M16 supplied with reducer/lubrication set including tapping adapters (6 pcs) including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 400 U/min : M3 - M12 throat: 100 - 950 mm weight: 16 kg The AQ 950 series pneumatic tapping machines have a radius of up to 950 mm. The construction of the machines enables you to get to the work piece quickly. For professional use. Easily mounted on a work surface. Accessoiries: M2-M12 supplied with reducer/lubrication set including tapping adapters including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 2000 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm bed width: 300 mm number of feeds: 42 longitudinal feeds:: 0,031 - 1,7 mm/U face slide travel: 285 mm total power requirement: 5,5 kW weight of the machine ca.: 1,72 t dimensions of the machine ca.: 3,2 x 1,0 x 1,3 m Operating Instructions: englisch + französisch Qick Toolholders: ähnlichch Multifix A comprehensive range of quality centre lathes characterised by wide versatility, high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick chan ...
turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 760 mm turning dia. in gap: 515 mm voltage: 400 V spindle bore: 38 mm spindle turning speed - stepless: 30-405 / 165-2200 U/min number of feeds: 40 longitudinal feeds:: 0,067 - 1,485 mm/U face feeds: 0,033 - 0,742 mm/U face slide travel: 170 mm thread - mm pitch: 0,4 - 7,0 mm thread - inch: 8 - 120 inch. adjustment of table: 165 mm dimensions of the machine ca.: 1660 x 740 x 1180 mm total power requirement: 2,5 kW weight of the machine ca.: 0,75 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 310 mm turning diameter over slide rest: 178 mm turning length: 910 mm spindle bore: 38 mm spindle turning speed range: 80 - 2000 (18) U/min upper slide-adjustment: 100 kW longitudinal feeds:: 0.052 - 1,392 mm/U metrical thread cutting: 0,4 - 7 mm threading WHITWORTH: 58 - 8 TPI total power requirement: 1,1 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 1,6 x 0,75 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 330 mm turning length: 1000 mm turning dia. over face-slide: 198 mm turning dia. in gap: 476 mm spindle bore: 36 mm metrical thread cutting: 0,4 - 3 mm threading WHITWORTH: 56 - 4 TPI tailstock travel: 95 mm face slide travel: 160 mm number of spindle speeds: 70 - 2000 (8) U/min upper slide-adjustment: 68 mm longitudinal feeds:: 0,02 - 2,7 mm/U total power requirement: 1,5 mm weight of the machine ca.: 600 kg dimensions of the machine ca.: 1850 x 670 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 310 mm turning diameter over slide rest: 178 mm turning length: 910 mm spindle bore: 38 mm upper slide-adjustment: 100 kW longitudinal feeds:: 0.052 - 1,392 mm/U metrical thread cutting: 0,4 - 7 mm threading WHITWORTH: 58 - 8 TPI spindle turning speed - stepless: 80 - 2000 U/min total power requirement: 1,1 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 1,6 x 0,75 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Potencia de presión: 50 bar : 200 mm : 1,2,3/4,1,5/4,1 1/2, mm peso de la máquina ca.: 140 kg Doblador de tubo hidroálico. Máquina adecuada para doblar tubos con diámetros 3/8 , 1/2 , 3/4 , 1 , 5/4 , 6/4 , 2 , 2-1/2 , 3 . Operación fácil y fluida. 6 segmentos incluidos salón incluido fabricado en Europa
turning speeds: 700 U/min : M2-M8 throat: 100 - 900 mm weight: 16 kg The AQ 950 series pneumatic tapping machines have a radius of up to 950 mm. The construction of the machines enables you to get to the work piece quickly. For professional use. Easily mounted on a work surface. Accessories: M2-M8 supplied with reducer/lubrication set including tapping adapters including air motor size 1 adapter connection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 20 - 76 mm grinding band dimension: 100 x 2000 mm Band Speed: 30 m/sec. power capacity - grinding motor: 3 kW 0: 400 V weight: 178 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 170 mm saw band length: 2035 x 20 x 0,9 mm cutting width: 130 mm cutting speed: 30 80 m/min : 130 mm : 130 x 130 mm capacity 60 degrees: round: 75 mm capacity 60 degrees: square: 75 x 75 mm : 170 mm : 166 x 166 mm weight of the machine ca.: 184 kg Compact band saw with variable speed. Including stand and cooling system. No slack due to special construction and rigid saw arm. Adjustable blade tension. Features: ?supplied with bi-metal saw blade material stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 170 mm saw band length: 2085 x 20 x 0,9 mm cutting width: 180 mm cutting speed: 35 - 70 m/min : 110 mm : 90 x 90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70 x 70 mm : 185 mm : 180 x 180 mm drive capacity - workpiece: 0,75 kW range L-W-H: 1000 x 600 x 1500 mm weight of the machine ca.: 195 kg Sawing machine with base, European design. This machine is used for making small cuts. The saw blade tension can be adjusted manually. Quick-acting clamp. No vibrations due to heavy duty saw arm. The machine has a 2-speed motor, saw blade guide bearings. The sawing pressure can be adjusted through a hydraulic cylinder. Features: adjustable sawing pressure automatic stop with cooling system eccentric quick-acting clamp separate metal control panel 2-speed motor precision adjustment of the runners with material stop switch controlled saw blade cover gear whee ...
turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1500 mm spindle bore: 58 mm spindle turning speed range: 25 - 2000 U/min turning dia. in gap: 690 mm metric threading: 41 / 0,1 - 14 mm thread - inch: 60 / 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 60 mm quill stroke: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1790 t dimensions of the machine ca.: 2,2 x 1,0 x 1,3 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 jaw chu ...
chamfer lenght: 2020 mm plate thickness: 1,5 mm stroke of milling spindle: 100 mm bending angle max.: 0 - 135 ° weight of the machine ca.: 1050 kg dimensions of the machine ca.: 2700 x 900 x 1370 mm Heavy duty angle bending machine. The upper blade is segmented and the segments can be taken out. The work piece is clamped through foot control, which leaves both hands free. The machine is equipped with a cylinder and adjustable lower blade, which makes bending sheet metal very easy. European design. upper blade segmented cylinders on both sides foot pedal height can be set very accurately lower blade adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm arm length: 350 - 1600 mm workpiece height max.: 1420 mm spindle taper MT: 5 spindle turning speed range: 56 -1450 U/min threading:: 40 mm quill stroke: 270 mm feed range - spindle: 0,06, 0,10, 0,20 mm/U slide adjustment -horizontal: mm table-size: 635 x 500 x 500 mm column diameter: 320 mm no. of turning speeds: 12 max. dis.center milling spindle to column: 1420 mm range L-W-H: 2060 x 995 x 2760 mm total power requirement: 3,5 kW weight of the machine ca.: 3300 kg Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system automatic ...
Weight: 27 kg : M3-M20 working range: 200-1900 mm turning speeds: 150/400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm arm length: 220 - 950 mm workpiece height max.: 1210 mm spindle taper MT: 4 spindle turning speed range: 88 - 1500 U/min threading:: 27 mm quill stroke: 220 mm feed range - spindle: 0,05 - 0,09 - 0,15 mm/U slide adjustment -horizontal: 730 mm table-size: 600 x445 x 380 mm column diameter: 210 mm total power requirement: 1,5 kW weight of the machine ca.: 1400 kg dimensions of the machine ca.: 1805 x 82´6 x 2190 m Radial drilling machine with mechanical clamping. Auxiliary dial for spindle feed depth indication. The main spindle is balanced by a special spring that makes it more durable than all other balancing mechanisms. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system automatic tool ejector gear wheel drven 2 speed motor The data for this ad was created with ...
bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 180 mm bore capacity in cast iron: 50 mm spindle taper MT: 4 table-size: 560 x 560 mm spindle turning speed - stepless: 0 - 1800 U/min transmission ratio: 2 : 730 x 500 mm thread dia.: 27 mm base plate: 730 x 500 mm column diameter: 150 mm spindle feeds:: 0,1 - 0,2 mm/U : M 24 total power requirement: 1,5 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 730 x 560 x 2400 mm description Industrial gear column drilling machine. The Gears are hardened and ground. The table is rotatable, equipped with T-slots and one Coolant device. The drilling depth stop can by means of the automatic depth stop. T he chuck protection is secured by a switch. Features: - stepless speed - Electromagnetic quill feed - 2-stage motor - Spindle with left / right rotation - Tool ejector - Machine lighting - automatic thread cutt ...
chamfer lenght: 2520 mm plate thickness: 1 mm stroke of milling spindle: 100 mm bending angle max.: 0 - 135 ° weight of the machine ca.: 1310 kg dimensions of the machine ca.: 3200 x 900 x 1370 mm Heavy duty angle bending machine. The upper blade is segmented and the segments can be taken out. The work piece is clamped through foot control, which leaves both hands free. The machine is equipped with a cylinder and adjustable lower blade, which makes bending sheet metal very easy. European design. upper blade segmented cylinders on both sides foot pedal height can be set very accurately lower blade adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mm arm length: 360 x 1250 mm workpiece height max.: 1270 mm spindle taper MT: 4 spindle turning speed range: 56-1450 U/min threading:: M 27 mm quill stroke: 270 mm feed range - spindle: 0,06, 0,10, 0,20 mm/U slide adjustment -horizontal: 890 mm table-size: 635 x 520 x 420 mm column diameter: 300 mm base plate: 1785 x 785 x 190 mm no. of turning speeds: 12 max. distance between table and spindle: 1350 mm total power requirement: 3,5 kW weight of the machine ca.: 2300 kg range L-W-H: 2060 x 995 x 2645 mm Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels ...
bore capacity in steel (diameter): 50 mm arm length: 350 - 1600 mm workpiece height max.: 1250 mm spindle taper MT: 5 spindle turning speed range: 25 - 2000 U/min threading:: 30 mm quill stroke: 315 mm feed range - spindle: 0,04 - 3,2 mm/U slide adjustment -horizontal: 1250 mm table-size: 625 x 500 mm column diameter: 350 mm total power requirement: 4 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: 2,5 x 1,07 x 2,84 m The Huvema radial drill range is unbeatable in price and performance, the machines are used for drilling, reaming and tapping. The drills frame is made from a high-quality fine-grain cast iron with heavy ribbing to ensure maximum reduction of vibrations. Precision ground gears ensure that the machine runs quietly, and the practical layout of the electrical and mechanical controls at the headstock make for easy operation. The machines are also fitted wit ...
rotary table dia.: 200 mm max. dia. of grinding wheel: 200 mm with manual ongoing: - 0 no. of working stations: 2 Stück grinding wheel width: 25 mm bore: 20 mm total power requirement: 0,45 kW weight of the machine ca.: 54 t dimensions of the machine ca.: 500 x 330 x 300 m Solid grinding machine of absolute industrial quality. Powerful motor, the perfect balancing ensures that the machine runs with little vibration and noise. Heavy-duty workpiece support and vision panels. Version with steel brush and motorless chip collection system. Equipped with high-quality spark protection. Characteristics: Emergency stop with idle circuit adjustable handrail trowel with eye protection with suction nozzle with chip trap with water basin. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 80 mm arm length: 500 - 2500 mm workpiece height max.: 2000 mm spindle taper MT: 6 spindle turning speed range: 16 - 1250 U/min threading:: M 65 mm quill stroke: 450 mm feed range - spindle: 0,04 - 3,2 mm/U slide adjustment -horizontal: 2000 mm table-size: 1000 x 800 x 560 mm column diameter: 550 mm base plate: 3520 x 1400 x 320 mm no. of turning speeds: 16 total power requirement: 7,4 kW weight of the machine ca.: 12500 kg dimensions of the machine ca.: 4000 x 1600 x 3850 mm Radial drilling machine with hydraulic clamping system. With IC timer - making it possible to release the arm for up and down movement and stopping the arm with one button. When changing the tool, the spindle can remain in its current position. gear wheels in oil bath safety device to prevent arm from falling down abruptly precision ground gear wheels integrated cooling system auto ...