Transportador de virutas: INKL. : inkl. Peso de la máquina aprox.: 2,2 t
Ancho del material: 630 mm Altura del material: 530 mm Rango de corte: 530 mm Longitud de la cinta de sierra: 7.675 mm Ancho de la cinta de sierra: 54 mm Longitud: 2.225 m Longitud de ancho: 5215 mm : 6610 103 164 Peso de la máquina aprox.: 5,5 t Dimensiones de la máquina aprox.: M
cutting diameter: 280 mm band length: 450 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 280 x 160 mm capacity 45 degrees: round: 180 mm dimensions of saw-blade: 450x40x2,0 mm engine output: 2,6 kW height of material-table: 500 mm weight of the machine ca.: 495 kg range L-W-H: 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 280 mm capacity 90 degrees: flat: 280 x 280 mm dimensions of saw-band: 4930 mm cutting speed: 19 - 90 m/min clamping range: 295 mm diameter: kleinste 16,0 mm feed range: 6 - 600 mm/min voltage: 400 V total power requirement: 5,5 kW weight of the machine ca.: 1750 kg dimensions of the machine ca.: 2100 x 2333 x 2065 mm Furnishing: - fully automatic metal band saw - hydraulic material clamping - Single stroke 6 - 600 mm / multiple stroke max. 9,999 mm Manual setting of the section length using the handwheel with quantity specification - smallest saw diameter 16.0 mm - minimum section length 6.0 mm - Automatic mode / single cut selectable - Infinitely variable belt speed adjustment - Stepless adjustment of the feed speed - User manuel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Diámetro máximo redondo de capacidad: 0 mm Calo máximo de ángulo: 0 Cuatro de capacidad: 0 mm Altura de la pieza de trabajo: 0 mm Anchura de la pieza de trabajo: 0 mm Rectángulo de capacidad: 0 mm Datos técnicos Rango de corte: redondeo hasta: 220 mm Cuadrada: 220 mm Corte de corte Cortemina: 6 mm máx.: 750 mm Máx. avance automático alimentación: 750 mm Veló velocidad de corte: síndesca desde: 18 m/min hasta 110 m/min Anchura de banda: 1,3 mm Voltaje 50 Hz 3x: 400 Voltios Potencia: 4 kW Peso de la máquina de la máquina: 1750 kg Tamaquinaria de dimensiones generales: Largo: 2050 mm Ancho: 2050 mm Alfiltra: 1300 mm Acubrasvarios: Conjunto de bandas de sierra Sistema transportador de rodillos Sistema de revestimiento Todos de material Portero de piezas de trabajo
Diámetro máximo redondo de capacidad: 0 mm Calebres de ángulo máximo: 0 Cuajo cuadrado de capacidad: 0 mm Altura de la pieza de trabajo: 0 mm Anchura de la pieza de trabajo: 0 mm Rectángulo de capacidad: 0 mm Datos técnicos Rango de corte: redondeo hasta: 400 mm Cuadrada: 400 x 400 mm Execución: Horizontal hidroáulica Talmbre: máx.: 6 mm máx.: 750 mm Max. avance automático alimentación: 750 mm Corte velocidad: sin paso desde: 20 m/min hasta 110 m/min Larga de banda: 5090 mm Anchura de banda: 34 mm Grosor de la hoja: 1,1 mm Presión máxima del dispositivo: 20 - 60 bar Voltaje 50 Hz 3x: 400 Voltio Potencia: 8 kW El peso de la máquina de la máquina: 2150 kg Máquina de dimensiones generales: Largo: 2420 mm Anchura: 2240 mm Algaño: 1915 mm Aportábrica diversas: Alimentación delantera automática Sistema de revestimiento: transportador de 100 l chip
Diámetro máximo redondo de capacidad: 0 mm Calebre de brillo máximo: 0 Cuatro de capacidad: 0 mm Altura de la pieza de trabajo: 0 mm Anchura de la pieza de trabajo: 0 mm Rectángulo de capacidad: 0 mm Ta horas de funcionamiento: 54112 Datos técnicos Rango de corte: redondeo hasta: 10 - 260 mm Cuadrado: 260 x 260 mm vertical hidroálico Automático Talmbre de corte: mínm.: 5 mm máx.: 680 mm Máx. avance automático alimentación de alimentación: 680 mm sinsuelo desde: 15 m/min hasta 125 m/min Larga de banda: 4115 mm Anchura de banda: 41 mm Groso de la hoja: 1,3 mm Voltaje 50 Hz 3x: 380 Voltios Potencia: 4 / 6,5 kW Palabra de la máquina de la máquina: 1915 kg Máquina de dimensiones generales: Larga: 2125 mm Anchura: 1930 mm Alfila: 2100 mm Ayteria variable: Alimentación delantera automática Larga del cojinete del material: Transportador de 1 m Sistema transportador de rodillo ...
Height under guides: 1 mm Throat: 1 mm Table length: 7675 mm Table width: 54 mm Capacity 90°: 530 x 630° Cutting speed Vario:12 - 120 Circle blade size: 7675 x 54 x 1,3mm Power: 17kW Chip conveyor: Yes Length: 3400mm Width: 1900mm Height: 2100mm Weight: 3800kg
Capacidad redonda diámetro máximo: 0 mmCalificados de ángulo máximo: 0Longitud de alimentación alimentador automático: 0 mm Velocidad de aserrado 11 – 14 – 18 – 20 – 22 – 36 M/Min Longitud: 2.200 mm Ancho: 900 mm Altura: 1.400 mm Peso: 1.200 kg
Capacity round maximum diameter: 400 mm Angle degrees maximum: 80 Capacity square: 400 mm Workpiece height: 400 mm Workpiece width: 400 mm Capacity rectangle: 400 mm Band saw KASTO - Twin A4.6 MACH-ID 8712 Make: KASTO Type: Twin A4.6 Year: 2015 Cutting Hours ca 1200 TOUCH Screen panel Capacity 90°: 400° Cutting flat 90°: 400 x 400mm Feed single stroke: 500mm Feed multiple stroke:9999mm Circle blade size: 5700 x 41 x 1,3mm Power: 4kW Chip conveyor: Yes Length: 2700mm Width: 2300mm Height: 2000mm Weight: 3200kg
Capacidad redonda diámetro máximo: 400 mmCalevales de ángulo máximo: 90Cuatura cuadrada: 400 mmAltura de la pieza de trabajo: 0 mmAnchura de la pieza de trabajo: 0 mmCapacidad rectángulo: 0 mm MACH-id 5161 MAKE KASTO Alemania TIPO Twin A4 YOP 2001 características técnicas Sierra de cinta / Circelblade / Automat Automat Ángulo L/R Grados 90 Gr. Capacidad de corte 90° 400 mm Capacidad de corte 90° Flatt 400 x 400 mm dimensiones de la hoja 5090 x 41 x 1,3 mm transportador de rodillos / push up / medición Transportador de rodillos Velocidad de corte M/min ...
Capacity round maximum diameter: 830 mm Angle degrees maximum: 90 Capacity square: 9195 mm Workpiece height: 830 mm Workpiece width: 830 mm Capacity rectangle: 830 mm Cutting 90°: 730 Cutting flat 90°: 730 x 830mm Feed single stroke: 750mm Feed multiple stroke:9999mm Min. cutting length:8mm Cutting speed Vario:12 - 120 Circle blade size: 9195 x 67 x 1,6mm Power: 20kW Chip conveyor: Yes Length: 2640mm Width: 5040mm Height: 2865mm Weight: 11500kg
Capacity round maximum diameter: 530 mm Angle degrees maximum: 90 Capacity square: 7675 mm Workpiece height: 530 mm Workpiece width: 530 mm Capacity rectangle: 530 mm Cutting 90°: 530 Cutting flat 90°: 530 x 630mm Feed single stroke: 600mm Feed multiple stroke:1500mm Min. cutting length:6mm Cutting speed Vario:12 - 120 Circle blade size: 7675 x 54 x 1,3mm Power: 9,5kW Chip conveyor: Yes Length: 2225mm Width: 5215mm Height: 2680mm Weight: 5250kg
Capacidad redonda diámetro máximo: 400 mmCalebres de ángulo máximo: 0Cuatura cuadrada: 0 mmAltura de la pieza de trabajo: 0 mmAnchura de la pieza de trabajo: 0 mmCajillo de capacidad: 0 mm MACH-id 3509 MAKE Kasto Alemania TIPO Twin A4 AÑO 2006 características técnicas Sierra de cinta / Circelblade / Sierra de cinta automática Ángulo L / R Grados 0 Gr / Corte recto Capacidad de corte 90° 400 mm Capacidad de corte 90° Flatt 400 x 400 mm dimensiones de la hoja5700 x 41 x 1,3 mm Velocidad de corte M/min 20 - 110 M/min Dimensiones Longitud 2980 mm Ancho 2700 mm Altura 2200 mm
Capacidad redonda diámetro máximo: 400 mmCalebres de ángulo máximo: 90Cuadro cuadrado de capacidad: 400 mmAltura de la pieza de trabajo: 0 mmAnchura de la pieza de trabajo: 0 mmCamente rectángulo de capacidad: 0 mm MACH-id 5002 MAKE Kasto Alemania TIPO Twin A4 YOP 2003 características técnicas Sierra de cinta / Circelblade / Automat Automat Ángulo L/R Grados 90 Gr Capacidad de corte 90° 400 mm Capacidad de corte 90° Flatt 400 x 400 mm dimensiones de la hoja 5700 x 41 x 1,3 mm Velocidad de corte M/min 20 - 110 M/min Dimensiones Longitud 3000 mm Ancho & ...
cap round: 520 mm cap square: 520 x 520 mm cap rectangle: 620 x 520 mm Depth of throat: 620 mm Max height of workpiece: 520 mm Table travel : Manual (1) -- hydraulic (2): manual Length of band saw: 6096 mm Power needed: 15 kW Length : 3300 mm Depth : 2200 mm Height: 2350 mm Weight: 4 ton
full automatic with chipconveyor cap round: 100 gt; 520 mm cap square: 100 x 100 / 520 x 520 mm cap rectangle: 100 x 10 / 620 x 520 mm Depth of throat: 550 mm Max height of workpiece: 550 mm Table travel : Manual (1) -- hydraulic (2): hydraulic (500 mm) Sawspeed: 17 > 125 m/min Length of band saw: 7239 x 54 x 1,3 mm Power needed: 10,5 kW Length : 3450 mm Depth : 2300 mm Height: 3450 mm Weight: 4500 kg
chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 12 meter in-feed rollerconveyor - max workpiece width: 800 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor Depth of throat: 1060 mm Max height of workpiece: 860 mm Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)
full automatic with chipconveyor cap round: 420 mm cap square: 420 x 420 mm cap rectangle: 420 x 420 mm Depth of throat: 420 mm Max height of workpiece: 420 mm Table travel : Manual (1) -- hydraulic (2): hydraulic (600 mm) Sawspeed: 17 > 120 m/min Length of band saw: 6300 x 41 x 1,3 mm Power needed: 8 kW Length : 2450 mm Depth : 3050 mm Height: 2230 mm Weight: 3400 kg
The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible.
There are three metal band saws available, connected load: 1.1kW, weight: 170kg.
Connected load: 0.9kW, weight: 170kg, including instruction manual, three saw blades for V2A and five saw blades for steel, the lowering hydraulics should be overhauled.
Cutting dimensions: 500x320mm, connected load: 2.2kW, length: 3550mm, width: 2000mm, height: 2110mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible.
Cutting dimensions: 400x260mm, connected load: 2.2kW, length: 2500mm, width: 1000mm, height: 1500mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible.
Cutting range round: 340mm, cutting range square: 340mm/380mm, feed length: 600mm, multiple feed: 1800mm, belt speed: 20 - 130m/min. Cutting speed infinitely variable. Material support height: 600mm (roller conveyor height). Documentation available. On-site inspection is possible.
- Year 2007 - Double column - Cutting capacities: Round Ø 320 mm Square 320x320 mm - Smallest sawable section ø 10 mm - Minimum single-cut fall 6 mm - Min. cut-off height 15 mm - Programmable automatic feeder, stroke 750 mm, multiple up to 20000 mm. - Load capacity 1000 kg - Variable cutting speed from 20 to 110 mm/mn - Continuously variable cutting pressure - Continuously adjustable material clamping pressure from 20 to 60 bar. - Interchangeable carbide guide - Mechanical blade tension - Cooling system 3 nozzles, flow rate 40L/mn - Lighting system - Full documentation - Very good condition
Two cutting speeds - Vice with counter-clamping device - Infinitely variable mitre adjustment (-45° to +60°) - Coolant device - Material support roller - Pin chip remover and chip drawer
for sale kasto pbs 800 hacksaw overhauled by the parent company, low voltage controls, works very well.
The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-360 AU Year of production 1995 Automatic operation type Tape cutting tool 5334x38x1.3 mm Max. dimensions of the cut material 360 x 360 mm Max. diameter of cut material 360 mm Angle cutting missing Arm feed speed 20 - 130 m/min Hydraulic vice pressing Engine power 7.5 kW Producer: KASTO Max. ...
The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-420 Cutting area approximately 420 mm Square cutting surface 420x420 mm Material feeding with automatic 600 mm Multi-material feeding 9999 mm Cutting speed continuously 20-130 m/min Total drive power 8 kW The driving power of the saw engine is 5.5 kW Stepless regulation of pressure reduction ...
cutting diameter:520 mm saw band length:7239 mm cutting width:520 mm sawing motor:5,5 kW cutting speed:20 - 130 m/min cutting width at rectangle material:520 mm total power requirement:9,5 kW weight of the machine ca.:3,8 t Machine with multi feed device chip conveyor infeed roller stand
cutting diameter:260 mm band length:450 x 4 x2 mm total power requirement:22,6 kW weight of the machine ca.:1024 kg dimensions of the machine ca.:1500 x 2310 x 955 mm square:240 x 240 mm flat material:260 x 180 clamping capacity:40 bar Documents:vorhanden
cutting diameter:520 mm saw band length:7239 x 50 mm cutting width:520 mm sawing motor:5,5 kW cutting speed:20 - 130 m/min total power requirement:9,5 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3,5 x 2,2 x 2,1 m - Multifeed device - infeed roller stand - chip conveyor - automatic operation
weight of the machine ca.:1200 kg total power requirement:5,5 kW dimensions of the machine ca.:1,8 x 1,67 x 1,30 m band length:575 mm max. clamping height:180 mm max. clamping width:350 mm table - height over basement:500 mm saw bow - stroke length:160 mm 100 % before loading warranty: none one used hacksaw, make KASTO, type EBS 320A, year of production 1963, general overhauled in 1972
Description: Machine number: 6428106165 Serial number: 4026551 Power: 8.0 kW Material support length: approx. 2000 mm Cutting range in mm approx: Round: ⌀ 400 mm Square W x H: 400 x 400 mm Smallest diameter to be sawn: ⌀ 10 mm Min. length to be sawn: 6 mm Shortest offcut length in single cut: 15 mm Shortest offcut length in automatic mode: 80 mm Feed length: 750 mm (single), 20000 mm (multiple) Max. material weight: 1000 kg/m Infinitely adjustable cutting speed: 20 - 110 m/min Cutting feed infinitely adjustable Hydraulic material clamping, infinitely adjustable Clamping pressure: 25 - 60 bar Saw blade dimensions: 5700 x 41 x 1.3 mm Important note: General overhaul in January 2022, complete feed unit was replaced in 2022, saw blade tensioning wheel + bearing was replaced, hydraulic cylinder seals were replaced, clamping jaws were replaced, coolant pump was replaced For further techn ...
Description: 200 V, 1.4 kW. Max. Cutting capacity: round material: 210 mm dimensions of saw-blade: 350 x 32 x 2 mm, weight approx.: 320 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 500 x 1,200 mm
Description: Vice clamping width approx. 250 mm Saw blade length 430 mm 2-stage drive weight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm
Description: Cutting area round material 260 mm , Cutting area square material 260 x 260 mm weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 6,800 x 2,300 x 1,550 mm
Description: Saw blade speed 18 to 110 m/min , Includes documentation cutting diameter: 260 mm, total power requirement: 4 kW, weight approx.: 1,300 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 2,100 x 1,300 mm
Description: Operating voltage: 380 V Frequency: 50 Hz Connection: 1.6 kW Rated current: 16 A Cutting ranges: Round at 90°: approx. 280 mm Square at 90°: approx. 280 x 280 mm Flat at 90°: 360 x 180 mm Round at +45°: approx. 180 mm Square at 45°: 180 x 180 mm Flat (width x height) at 45°: 260 x 180 mm Smallest diameter to be sawn: 6 mm Shortest material length that can be clamped: 15 mm Cutting speed: 19 - 100 m/min Cutting feed infinitely adjustable Saw blade dimensions: 3830 x 25 x 0.90 mm Approx. Onsite Dimension. (l x w x h): 2,800 x 800 x 2,300 mm, weight approx.: 500 kg
Electric motor, luminous flux motor -Power: 0.37 kW -Speed: 2850 rpm -Hollow shaft: Ø 16 mm -Construction: B5 -Protection class -Dimensions: 265/143/H143 mm -Weight: 9.4 kg
Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 475 mm adjustable -Roll width: 280 mm -Dimensions: 380/380/H480 mm -Weight: 64 kg
Hacksaw, hacksaw machine, hacksaw machine -Manufacturer: Kasto, Hydr. hacksaw machine -Max. Cutting height: approx. 310 mm -Max. Cutting width: approx. 340 mm -Saw blade: length approx. 615 mm -Roller conveyor length: 1500 mm -Dimensions machine: 2300/1800/H1300 mm -Weight: 1500kg
Aluminum cross-cut saw, aluminum circular saw, aluminum semi-automatic circular saw, cross-cut saw, aluminum metal circular saw, light metal circular saw, metal cutting machine -Manufacturer: KASTO, semi-automatic under-table miter saw machine with roller conveyor -Type: KASTOalu U 14 -Saw blade: Ø 400 mm, 2,800 rpm -Saw feed: Hydropneumatic, infinitely adjustable saw feed with rapid return -Swivel range: 180° infinitely adjustable miter device -Cutting area 90°: 200x80 mm / 125x125 mm / 140 mm -Cutting area 45°: 140x80 mm / 110x110 mm / 130 mm -Coolant device: minimum quantity lubrication system -Drive: 1.8 kW -Clamping device: Two vertical and two horizontal clamping elements -Roller conveyor: 3000/520/H950 mm / 2000/470/H950 mm -Dimension saw: 700/1100/H1370 mm -Total weight: 298 kg
Cold circular saw, metal circular saw, metal chop saw -Max. Saw blade: Ø 315 mm -with coolant device: -Saw blade speed: 33/66 rpm -Cutting area: 90° flat 135 x 80 mm -Cutting area: 45° flat 100 x 80 mm -swivel: -Dimensions: 450/800/H1700 mm -Weight: 278 kg
This KASTOWIN A4.6 sawing machine was manufactured in 2019. With a cutting range of 460 mm, its suitable for various material sizes, offering flexible operation. The machine has a hydraulic material clamping system and a saw motor with variable cutting speed ranging from 12 to 150 m/min. Its dimensions are 1650 mm in length, 2900 mm in width, and 2030 mm in height, with a weight of 3450 kg. Consider purchasing this KASTOWIN A4.6 for enhanced sawing capabilities. Contact us for further details regarding this sawing machine.
This KASTO SSB 260 VA Sawing machine was manufactured in the year 1998 in Germany. The machine disposes of an automatic feeding and a conveyor belt for saw blades. It has a saw blade length of 4115mm, a saw band width of 34 mm and a maximum diameter of 260 mm. It is in good conditions.
This KASTO cut DU 4 Sawing machine was manufactured in the year 2010 in Germany. The machine has a Cutting speed of 20 to 110 m/min.
This KASTO speed C 14 Sawing machine was manufactured in the year 2004 in Germany. It is equipped with a chip removal. Disposes of a signal lamp and a Hydraulic lift roller.