usado KRAUSS MAFFEI para la venta

Description: Serial number 174470 Clamping force: 2000 kN Screw diameter 45 mm Ls/D ratio: 22 Injection pressure: 2336 bar Stroke volume: 305 ccm Shot weight, PS 278 g Injection rate: 200 ccm/s Screw speed: 342 1/min Plasticising rate max.: 37 g/s Nozzle pressure: 110 kN Mould opening force, max.: 101 kN Travel force movable platen Opening: 50 kN Travel force movable platen Closing: 42 kN Size of mould platens 915 mm x 915 mm Distance between tie bars 560 mm x 560 mm Mould opening stroke: 700 mm Mould height min.: 350 mm Max daylight: 1050 mm Hydraulic ejector - stroke: 200 mm Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Approx. Onsite Dimension. (l x w x h): 5,690 x 1,900 x 2,400 mm, weight approx.: 2,534 kg

Description: Serial number 254335 Clamping force 300 T Screw diameter 50 mm Tie bar spacing (H) 630 mm Tie bar spacing (V) 630 mm Shot volume 432 cm³ Shot weight 393 g Pressure on material 2304 bar Platen length 995 mm Platen width 1050 mm Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Control voltage 24 VDC Largest MTR FLA 34 A Short circuit current rating 10 KA dimension 45970 x 2040 x 2360 mm Weight 12.500 kg Approx. Onsite Dimension. (l x w x h): 45,970 x 2,040 x 2,360 mm, weight approx.: 12,500 kg

Description: serial numbe 253455 Clamping force 2500 kN Screw diameter 60 mm Mould opening force, max.: 160 kN Travel force movable platen Opening: 67 kN Travel force movable platen Closing: 62 kN Size of mould platens 900 mm x 830 mm Distance between tie bars 630 mm x 560 mm Mould opening stroke: 820 mm Mould height min.: 330 mm Max daylight: 1150 mm Injection pressure: 1778 bar Stroke volume: 678 ccm Shot weight, PS 610 g Injection rate: 565 ccm/s Screw speed: 259 1/min Plasticising rate max.: 58 g/s Nozzle pressure: 110 kN Electric and Hydraulic Equipment Nominal capacity of pump motor: 45 kW Installed heating capacity: 22,7 kW Rated voltage 400 V, 50 Hz Rated current 80 A Max. fuze rating 80 A Control voltage 24 VDC Largest MTR FLA 34 A Short circuit current rating 10 KA Dimension 8280 x 2235 x 2350 mm Weight 12600 kg Approx. Onsite Dimension. (l x w x h) ...

Description: serial number 154951 Clamping force 1500 kN Mould opening force, max.: 86 kN Travel force movable platen Opening: 45 kN Travel force movable platen Closing: 34 kN Size of mould platens 840 mm x 790 mm Distance between tie bars 560 mm x 500 mm Mould opening stroke: 600 mm Mould height min.: 300 mm Max daylight: 900 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: 20/11 kN Screw diameter: 50 mm Ls/D ratio: 20 Injection pressure: 1892 bar Stroke volume: 377 ccm Shot weight, PS: 343 g Injection rate: 181 ccm/s Screw speed: 255 1/min Plasticising rate max.: 35 g/s Nozzle pressure: 84 kN Nominal capacity of pump motor: 22 kW Installed heating capacity: 16 kW Adjustable barrel heating zones: 5 Dry cycle number: 1700 1/h Reservoir capacity: 345 ltr. Rated voltage 400 V, 50 Hz Rated current 80 A Control voltage 24 VDC Dimension 4670 x  ...

Description: closing force: ,1200 kN auger diameter: ,35 mm ejection stroke: ,160 mm batch volume: ,61,09 cm3 injection speed: ,288,6 cm3/s injection pressure: ,2429 bar Approx. Onsite Dimension. (l x w x h): 6,000 x 1,700 x 2,000 mm, weight approx.: 9,700 kg

Description: working hours: approx. 41041 hrs. 3axis robot serial number: 2112257 IMM type: Thermoset IMM serial number: 51019359 clamping force: 160 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 115 cm3 max. spec. injection pressure: 1488 max. stroke opening: 950 mm max. mould thickness: 950 mm min. mould thickness: 300 mm tie bars distance horizontal: 520 mm tie bars distance vertical: 520 mm locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 75 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 1,800 x 4,600 x 3,100 mm, weight approx.: 11,700 kg

Description: Injection unit: Screw diameter: 50 mm Shot weight: 343 G Stroke volume: 377 CCM cm³ Injection pressure: 1892 bar Plastification rate: 35 G/S Screw speed: 255 1/min Closing unit: Closing force: 1500 KN max. opening daylight: 1000 mm Bar spacing: 500 X 500 mm min. molding height: 400 mm Tool mounting platens: 780 X 790 mm Approx. Onsite Dimension. (l x w x h): 4,600 x 1,700 x 2,200 mm, weight approx.: 6,500 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø240 x 135 mm -Item No.: 401 2258 -Heating power: 4200 W -Voltage: 230/400V -Number: 2x heating tape available -Price per piece -Dimensions: 290/255/H135 mm -Weight: 2.8 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø200 x 160 mm -Item No.: 401 7184 -Heating power: 5500 W -Voltage: 230/400V -Number: 2x heating tape available -Price per piece -Dimensions: 310/255/H160 mm -Weight: 4.0 kg

Directional control valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -comes from a Krauss Maffei 1000 t injection molding machine -Machine type: KM 1000/5000A -Valve manufacturer: Bosch -Type: 081WV10P1N126WS024/00AO -Type: 0811 104 124 -Max. Pressure: 315 bar -Tension -Dimensions: 850/600/H550 mm -Weight: 634 kg

Power supply, converter, power supply, switching power supply, MC3 control -Manufacturer: Krauss Maffei, power supply from injection molding machine -Type: NT 100 -Dimensions: 260/140 / H130 mm -Weight: 5 kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards -Manufacturer: Krauss Maffei, MC3 control plug-in cards circuit boards from injection molding machine -Temperature controller card: Gossen Pantatherm DS 4 3 pieces -DC-DC converter: Elba euro module PCD 54 CP on plug-in board: Krauss Maffei AN 100 -Prop.amplifier: Bosch 0 811 405 015 / 0 811 405 002 / 0 811 405 099 - Plug-in card: Krauss Maffei SK201 -Individual components: see photos -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 4.8kg

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards -Manufacturer: Krauss Maffei, MC3 control of plug-in cards, printed circuit boards from injection molding machine -Power Supply / Converter: Elba euro module PCD 315 CP -Insert card: Krauss Maffei KR100 -Plug-in card: Krauss Maffei PV104 -Insert card: Krauss Maffei LV100 2 pcs. -Installation card: Krauss Maffei EK200 -Insert card: Krauss Maffei EK100 -Plug-in card: Krauss Maffei SP400 -Installation card: Krauss Maffei PR200 -Individual components: see photos -Price / sale: complete -Dimensions: 485/270/320 mm -Weight: 12.9 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack, hydraulic station, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Manufacturer: Krauss Maffei, hydraulic unit from injection molding machine 90-340 B -Motor: Loher 15 kW / 380 / 660V / 1425 rpm -Individual components: see pictures -Dimensions: 900/520 / H610 mm -Weight: 261 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø x 60mm -Item No.: 401 2627 -Heating power: 670 W -Voltage: 230V -Number: 2x heating tape available -Price per piece -Dimensions: 160/100/H60 mm -Weight: 0.3 kg

This used Krauss-Maffei KM 300-1400-390-3-CZ, manufactured in 2003, comes fully equipped with new operation-specific software, updated hydraulic plans, and precision injection units for enhanced performance. Key features include a comprehensive electrical installation, a detailed locking unit, a robust machine bed design, and a state-of-the-art cooling system. Additionally, it includes a hydraulic ejector system and transport lock for safety and reliability. Operating instructions are available in Spanish and German. Seize the opportunity to buy this Krauss-Maffei KM 300-1400-390-3-CZ injection moulding machine for top-notch manufacturing efficiency. Contact us for more information.

General SKU290N365 LocationBarneveld MakeKrauss Maffei Verfahrenstechnik Gbmh TypeReactotherm No.08613/1 Year of construction1994 Pressure Working pressure10 Bar Working pressure jacket16 Bar Main Features MaterialStainless steel Volume80 Ltr. Motor15 KW Specified Features - Paddle dryer Paddle dryercheck Continuous/ Batch Capacity+/- 80 Ltr Trough sizesdia.300mm x1400mm Inlet(2x) dia.200mm, (1x) dia.150mm Outletdia.200mm With jacketcheck Shaft can be heatedcheck Max. temperature350 gr.C Motor2,5-15 KW, 88-460 Volt, 10-60 Hz MaterialStainless steel 1.4404 (316L) Information Mounted on framecheck Floorspace3,4x1,6 M Total height1,4 M Weight1800 KGMinerals & inorganicAPIBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAnimal feedOther chemicalStarchFine chemicalsSugarCosmeticsOther pharmaceuticsOintmentsGener ...

General SKU264P392 LocationBarneveld MakeKrauss Maffei AG (DE) TypeHZ 40 Si No.9556 Year of construction1984 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter400 mm Specified Features - Peeling centrifuge Peeler centrifugeHorizontal Siphon peeler centrifuge Capacity9,8 Ltr Basket sizesdia.400mm x200mm Max. loading weight12,1 KG Hydraulic drivecheck With hydraulic unitcheck Motor5,5 KW, 380/660 Volt (Ex) Max. basket speed3000rpm With scrapercheck Hydraulic operatedcheck Solids outletdia.100mm Liquid outletdia.90mm MaterialStainless steel Information Mounted on framecheck With switchgearcheck Floorspace1,7x1,4 M Total height1,9 M Weight1650 KG ATEX compatiblecheck Extra SpecificationsFilter area 0,25m2,, with spare basketPeeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- M ...

General SKU026F086 LocationBarneveld MakeKrauss Maffei AG München TypeHZ-630 Ph No.11643 Year of construction1997 Main Features MaterialHastelloy Motor22 KW Inlet diameter630 mm Specified Features - Peeling centrifuge Peeler centrifuge(1x) Basket sizesDia: 630x330mm Max. loading weight52kg With hydraulic unitcheck Motor1,5 kW, 400 Volt (Ex) Max. basket speed2365 Rpm Motor22kW, 400 Volt (Ex) With scrapercheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information Floorspace2,5x1,5 M Total height1,8 M ATEX compatiblecheckPeeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld ...

General SKU358U925 LocationBarneveld MakeKrauss Maffei TypeHZ 1000 Ph No.60000215 Year of construction2000 Main Features MaterialStainless steel Motor36 KW Inlet diameter200 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity170,4 Ltr. (max. 171,8 Ltr.) Basket sizesDia. 1000x500 mm Wall thickness20 mm Max. loading weight213 kg Max. basket speed1500 rpm Motor36 kW, 400 volt (Ex) With scrapercheck Hydraulic operatedcheck Motor1,5 kW Solids outletDN200 MaterialStainless steel 1.4404 (316L) Information Total height2,0 m Weight9100 kg CEcheck Floorspace3,2x1,8 mPeeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine  ...

General SKU245U288 LocationBarneveld MakeKrauss Maffei TypeSZ 51-8 No.11468 Year of construction1995 Main Features MaterialStainless steel Motor18.5 KW Inlet diameter70 mm Specified Features - Pusher centrifuge Pusher centrifugecheck Basket diameterdia. 604 mm Basket width675 mm Wall thickness20 mm Max. loading weight53,6 kg Motor18,5 kW, 1470 rpm Max. basket speed665 rpm Hydraulic operated pushercheck With hydraulic unitcheck Motor11 kW Inletdia. 70 mm Solids outlet300x80 mm Liquid outlet430x110 mm MaterialStainless steel 1.4539 (904L) Information Mounted on framecheck Total height1,3 m Weight2450 kg CEcheck Floorspace2,58x1,20 m Extra SpecificationsTemerature range 10-110°, adm. density 1060 kg/m3 :  :Pusher centrifugesKrauss MaffeiCentrifuges > Pusher centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition ...

General SKU245U290 LocationBarneveld MakeKrauss Maffei TypeSZ 51-8 No.11467 Year of construction1995 Main Features MaterialStainless steel Motor18.5 KW Inlet diameter70 mm Specified Features - Pusher centrifuge Pusher centrifugecheck Basket diameterdia. 604 mm Basket width675 mm Wall thickness20 mm Max. loading weight53,6 kg Motor18,5 kW, 1470 rpm Max. basket speed665 rpm Hydraulic operated pushercheck With hydraulic unitcheck Motor11 kW, 3000 rpm Inlet70 mm Solids outlet300x80 mm Liquid outlet430x110 mm MaterialStainless steel 1.4539 (904L) Information Total height1,9 m Weight2440 kg CEcheck Floorspace2,58x1,20 m Extra SpecificationsTemperature range 10-110°, adm. density 1060 kg/m3Pusher centrifugesKrauss MaffeiCentrifuges > Pusher centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price c ...

General SKU001B020 LocationBarneveld MakeKrauss Maffei TypeHZ-63 si No.9352 Year of construction1982 Main Features MaterialStainless steel Motor18.5 KW Inlet diameter630 mm Specified Features - Peeling centrifuge Peeler centrifuge(1x) Basket sizesdia. 630x300mm Wall thickness15mm Max. loading weight50 KG Hydraulic drivecheck With hydraulic unitcheck Motor18,5 KW, 380 Volt (Ex) Max. basket speed2400 Rpm With scrapercheck Motor1,3 KW, 380-420/655-725 Volt (Ex) MaterialStainless steel 1.4571 (316Ti), Stainless steel 1.4581 (316Nb) Information Floorspace2,5x1,8 M Total height1,7 M Weight4000 KG ATEX compatiblecheckPeeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...

General SKU345S668 LocationBarneveld MakeKrauss Maffei (D) TypeHZ 125/3.2 Si No.11437 Year of construction1994 Main Features MaterialStainless steel Motor55 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesDia:1250 x800mm Wall thickness20mm Max. loading weight498 Kg With hydraulic unit(controls) Motor55 kW 380 Volt (EEx de II c T4) With variable speed drivecheck Max. basket speed1220 rpm With scrapercheck MaterialStainless steel 1.4571 (316Ti) Information Mounted on foundation platecheck Floorspace4,5x2,3 M Total height2,7 M Weight7000 KG ATEX compatiblecheck Extra SpecificationsFilter area 3,14m2, : Discharge with feedscrew. Peeling centrifugesKrauss MaffeiCentrifuges > Peeling centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shi ...

General SKU221M089 LocationBarneveld MakeKraus Maffei TypeRTD-8 (total heating surface 0,28 m2) No.8603 Year of construction1990 Pressure Working pressure10 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume8 Ltr. Motor7.5 KW Specified Features - Paddle dryer Paddle dryerReactotherm (1x) Capacity8 Ltr. Trough sizesdia.170x375mm With jacketcheck 2 Ltr. Shaft can be heatedcheck 1 Ltr. Max. temperature350 Degr. C. Motor7,5 kW, 500 Volt (Ex) With variable speed drive(frequency inverter) MaterialStainless steel 1.4571 (316Ti) Information Mounted on framecheck Floorspace1,8x0,9 M Total height1,8 M Weight700 KG ATEX compatiblecheckMinerals & inorganicAPIBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAnimal feedOther chemicalStarchFine chemicalsSugarCosmeticsOther  ...

General SKU066E306 LocationBarneveld MakeKrauss Maffei TypeRTD-30 / RTC-60 No.91085/1 (KM order 361 704/1) Year of construction1992 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket25 Bar Main Features MaterialStainless steel Volume40 Ltr. Motor18.5 KW Specified Features - Paddle dryer Paddle dryerReactotherm (1x) Capacity40 Ltr. Trough sizesdia. 270x650mm Inletdia. 150mm Outletdia. 40mm With jacketcheck5+4,6 Ltr Shaft can be heatedcheck 0,5 Ltr. Max. temperature400°C. With adjustable packing glandscheck Motor18,5kW, 400 Volt MaterialStainless steel 1.4571 (316Ti) Information Mounted on framecheck Floorspace3,3x1,4 M Total height3,5 M Weight2000 KG Extra SpecificationsWith filter type MF 0,5 m2 Minerals & inorganicAPIBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAnimal feedOt ...

General SKU117W596 LocationBarneveld MakeKrauss Maffei TypeVZO-125/2,5 No.9708 Year of construction1984 Main Features MaterialStainless steel Motor30 KW Inlet diameter1250 mm Specified Features - Basket centrifuge Basket centrifuge(1x) Perforated basketcheck Basket sizesdia. 1250x630mm Wall thickness12mm Max. loading weight485 KG With scrapercheck Hydraulic operated(motor hydr. unit 0,55 KW 220/380 Volt Ex) Liquid outlet165x165mm Motor17,0/30,0 KW, 390 volt (Ex) Max. basket speed950 Rpm MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,4x1,8 M Total height2,8 M ATEX compatiblecheckBasket centrifugesKrauss MaffeiCentrifuges > Basket centrifugesBrand > Krauss Maffei What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

KRAUSS MAFFEI KM 650-3500 C1 injection molding machine Year of production - 2003 Robot name-WITTMANN W 632 Closing force. [tons] - 650 Min. Height of the form [mm] -600 Max. mold height [mm] -1150 Column spacing (hxv) in the light (mm) - 1000 x 930 Mounting plates size - 1490 × 1440 Ejector stroke (max) [mm] -250 Screw diameter [mm] -90 Injection weight [g] -2500 Oil quantity [liter] -1000 Injection sequence in mold -2 Number of hydraulic cores S / R- 0/2 The maximum distance between the plates [mm] -1500

KRAUSS MAFFEI KM 80-220 C1 2002 , screw 35 mm clamping force 80 ton in production

Closing unit Maximum opening width [mm] 1300 injection unit Screw diameter [mm] 80 Injection volume [cm3] 1433 Injection weight [g] 1304 Injection pressure [bar] 1829 Electric-hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 36 Dimensions and weight Net weight with control cabinet [t] 15.3 Dimensions (L x W x H) [m] 6.91 m x 2.20 m x 2.41 m Closing unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 min./ max. mold height [mm] min 380

Used Krauss Maffei 150-700 C1 Injection moulding machine From 1998 Without robot Machines is functional and in production, can be seen anytime by appointment. PDF attached.

Control Type: MC4 Number of hours: 37,121 H Closing force: 110 T Opening stroke: 600 mm Between columns: 470 x 470 mm Tray dimensions: 745 x 770 mm Mini/maxi mould: 300 mm Max gap between trays: 900 mm Injection: Screw diameter: 45 mm Screw length: 20 D cm3: 275 Bars: 1878 General: Motor power: 18.5KW Heating power: 13KW Closing weight: 6T Options: Cores: 2 Robot interface: YES Bi metal: YES Others: accumulators

Used Krauss Maffei 280-1900 C3 Injection moulding machine From 2000 Equipped with Wittmann robot W631-0386/2003 Machines is functional and in production, can be seen anytime by appointment. PDF attached

Clamping force [kN] 20000 Dimensions of mounting plates (hxv) [mm] 2650 x 2400 Clearance between columns (hxv) [mm] 1870 x 1620 min./ max. mold height [mm] 800-1700 Maximum opening width [mm] 3600 injection unit Screw diameter [mm] 150 Injection volume [cm3] 11928 Injection weight [g] 8469 Injection pressure [bar] 1445 Electric-hydraulic equipment Pump motor rated power [kW] 160 Heater power [kW] 109 Dimensions and weight Net weight with control cabinet [t] 111 Dimensions (L x W x H) [m] 14.75 x 4.10 x 3.41

Closing unit Clamping force [kN] 5000 Dimensions of mounting plates (hxv) [mm] 1270 x 1310 Clearance between columns (hxv) [mm] 900 x 800 min./ max. mold height [mm] min 480 Maximum opening width [mm] 1650 injection unit Screw diameter [mm] 80 Injection volume [cm3] 1543 Injection weight [g] 1404 Injection pressure [bar] 2205 Electric-hydraulic equipment Pump motor rated power [kW] 90 Heater power [kW] 44 Dimensions and weight Net weight with control cabinet [t] 7.9 Dimensions (L x W x H) [m] 7.65 m x 2.55 m x 2.55 m

Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 610 X 610 Clearance between columns (hxv) [mm] 405 x 405 Min./max. mold height [mm] min 250 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 156 Shot weight [g] 142 Injection pressure [bar] 2429 Dimensions and weight (approximately) Net weight with control cabinet [t] 3,5 Dimensions (L x W x H) [m] 4,01 x 1,39 x 2,02

Net weight with control cabinet [t] 3,5 Dimensions (L x W x H) [m] 4,01 x 1,39 x 2,02 Clamping/injection matrix Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 610 x 610 Clearance between columns (hxv) [mm] 405 x 405 Min./max. mold height [mm] min 250 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 156

Krauss Maffei KM 450-2700 C3 Clamping force 450 Ton Distance between columns : 900 mm x 800 mm Number of working hours : 55.000

Clamping force: 110 tons Closure system: hydraulic Plate dimensions (H x V): 745x770 mm Dimensions between guide bars (H x V): 470x470 mm Mold min. thickness: 300 mm Screw diameter: 50 mm Injection volume: 393 cm3 Injection weight in PS: 358 g Pressure on material: 1892 bar Length x Width x Height: 5,0 x 1,6 x 2,0 m Weight: 7800 kg Year: 2007 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 8 Pneumatic valves: 1

Conic 60/126 extruder Machine can be seen in working condition Machine has been worked on PVC material

Krauss Maffei KM 420-3000 CX Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Min./max. mold height [mm] min 580mm Maximum opening width [mm] 1600 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1232 Shot weight [g] 1121 Injection pressure [bar] 2389 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Power rating of barrel heating [kW] 29 Dimensions and weight (approximately) Net weight with control cabinet [t] 22,3 Dimensions (L x W x H) [m] 7,32 x 2,49 x 2,38

Krauss Maffei KM 150-520 C2 with the LR 100 robot Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 780 x 790 Clearance between columns (hxv) [mm] 500 x 500 Maximum opening width [mm] 900 injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electric-hydraulic equipment Pump motor rated power [kW] 30 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 7.1 Dimensions (L x W x H) [m] 4.66 x 1.51 x 2.19

Clamping force [kN] 800 Dimensions of mounting plates (hxv) [mm] 610 X 610 Clearance between columns (hxv) [mm] 405 x 405 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 25 Injection volume [cm3] 52 Injection weight [g] 47 Injection pressure [bar] 2500 Dimensions and weight Net weight with control cabinet [t] 2.2 Dimensions (L x W x H) [m] 3.3 x 1.2 x 1.9

Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 min./ max. mold height [mm] min 380 Maximum opening width [mm] 1300 injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Injection weight [g] 393 Injection pressure [bar] 2304 Electric-hydraulic equipment Pump motor rated power [kW] 75 Dimensions and weight Net weight with control cabinet [t] 15.5 Dimensions (L x W x H) [m] 6.79 x 2.17 x 2.25

Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 min./ max. mold height [mm] min 300 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electric-hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 13 Dimensions and weight Net weight with control cabinet [t] 6 Dimensions (length x width x height) [m] 4.48 x 1.51 x 2.19

Krauss Maffei KM 160-750 CX Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 820 x 845 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] min 300 mm Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 393 Shot weight [g] 357 Injection pressure [bar] 1892 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 10,97 Dimensions and weight (approximately) Net weight with control cabinet [t] 6 Dimensions (L x W x H) [m] 4,6 x 1,6 x 2,1

Closing unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 393 Injection weight [g] 358 Injection pressure [bar] 358 Dimensions and weight Net weight with control cabinet [t] 7.8 Dimensions (length x width x height) [m] 5.0 x 1.6 x 2.0

Closing unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Maximum opening width [mm] 900 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878 Electrical and hydraulic equipment Rated power of the pump motor [kW] 18.5 Heater power [kW] 13 Dimensions and weight Net weight with control cabinet [t] 6 Dimensions (length x width x height) [m] 4.48 x 1.51 x 2.19 Additional equipment: Single-phase plastic feeder Picker

Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance

Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 300 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 432 Injection pressure [bar] 1564 Dimensions and weight Net weight with control cabinet [t] 7.8 Dimensions (length x width x height) [m] 5.0 x 1.6 x 2.0