usado METALLKRAFT para la venta

MARCA: METALLKRAFT AÑO: 2017 MODELO: HTBS-T 3100-60 TIPO DE APLICACIÓN: ESQUILA UBICACIÓN: ALEMANIA TIPO DE MÁQUINA: MÁQUINAS DE CORTE DISPONIBILIDAD: INMEDIATA Información técnica DATOS GENERALES MEDIDAS ANCHO: 3700 MM PROFUNDIDAD DE MEDICIONES: 4110 MM MEDIDAS ALTURA: 2100 MM PESO DE LA MÁQUINA: 7650 KG UNIDAD DE CONTROL MODELO: DT 7 MESA LONGITUD EXTERIOR: 3515 MM ANCHO EXTERIOR: 865 MM Información adicional BENEFICIOS DE LA MÁQUINA BENEFICIOS TÉCNICOS DE LA MÁQUINA: - MEDIDOR MOTORIZADO: 1000 MM - VALLA LATERAL : 1500 MM - BRAZOS DE SOPORTE DE DOS HOJAS DE 1000 MM (DE 4 M MÁQUINAS DE TRES BRAZOS DE SOPORTE DE HOJA) INTERRUPTOR DE PIE MÓVIL CON BOTÓN DE PARADA DE EMERGENCIA - ACEITE HIDRÁULICO - PROTECTOR DE DEDO DIVIDIDO: 1000 MM - ANCHURA DE TRABAJO: 3100 MM - VELOCIDAD DE MEDIDOR: 120 MM / S BENEFICIOS CUALITATIVOS DE LA MÁ ...

MARCA: METALLKRAFT AÑO: 2017 MODELO: GBPR30540-100 TIPO DE APLICACIÓN: DOBLADO UBICACIÓN: ALEMANIA TIPO DE MÁQUINA: DOBLADORAS DISPONIBILIDAD: INMEDIATA Información técnica UNIDAD DE CONTROL MARCA: DT-10 UNIDAD PRINCIPAL FUERZA DE PRENSADO: 4000 KN MOVIMIENTO MOVIMIENTO DEL EJE X: 650 MM Información adicional BENEFICIOS DE LA MÁQUINA BENEFICIOS TÉCNICOS DE LA MÁQUINA: - GUIADO SOBRE RIELES LINEALES Y ACCIONADO POR HUSILLOS DE BOLAS SIN CONTRAGOLPES (DESDE GBP-R 4050-400 X-AXIS 750MM) - EJE R MANUAL, - AJUSTE DE ALTURA DE LOS DEDOS DEL BACKGAUGE A TRAVÉS DE VOLANTES - POSICIONAMIENTO DE LA VIGA SUPERIOR CON UNA RESOLUCIÓN DE 0. 01MM - DEFLEXIÓN VERTICAL ATERAL - CORONACIÓN MANUAL DE MESA CON CONTADOR - JUEGO COMPLETO DE HERRAMIENTA SUPERIOR REHFUSS - JUEGO COMPLETO DE TROQUELES DE 4 PLIEGUES CON ABERTURAS EN V DE 16, 22, 35, 50 MM - GUÍA ...

General: Año de construcción 2019 Velocidad del husillo 1.450 rpm Tabla de velocidad de desplazamiento 5 – 25 m/min Muela más grande 355 x 38 x 127 mm Husillo de distancia – mesa máx. 500 mm Superficie de sujeción 300 x 600 mm Control automático de alimentación AD5

General: Año de construcción 2019 Velocidad del husillo 1.450 rpm Superficie de sujeción 300 x 600 mm Muela más grande 355 x 38 x 127 mm Tabla de velocidad de desplazamiento 5 – 25 m/min Distancia entre husillo y mesa 500 mm Peso 1.700 kg Otros equipos y accesorios incluidos: Control automático de alimentación AD5 Dispositivo refrigerante Hidráulico

thread dia.: M6 - M36 mm turning speeds: 156 U/min radius: 1200 mm angle adjustable from - to: 0 - 90 Grad weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. ...

sheet width: 1050 mm plate thickness: 1 mm distance between columns: 1000 mm weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,16 x 0,93 x 0,73 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Espesor de la placa: 1,2 mm Diámetro del rollo: 62 mm Garganta: 100 mm Peso de la máquina aprox.: 50 kg Dimensiones de la máquina aprox.: 560 x 220 x 500 mm - Máquina de rebordear accionada por motor- Varios rodillos de rebordeado- Interruptor de pedal

cutting diameter: 220 mm saw band length: 2450 mm cutting width: 250 mm cutting speed: 40 / 80 m/min dimensions of saw-band: 2450 x 27 x 0,9 mm : 100 mm : 90 mm : 90 x 90 mm : 160 mm : 160 x 110 mm : 250 x 190 mm total power requirement: 0,75 / 1,1 kW table height: 925 mm weight of the machine ca.: 218 kg dimensions of the machine ca.: 1300 x 700 x 1530 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 240 mm saw band length: 2980 mm cutting width: 320 mm dimensions of saw-band: 2980 x 27 x 0,9 mm band speed: 35 / 70 m/min table height: 940 mm capacity 90 degrees: round: 290 mm capacity 90 degrees: flat: 320x290 mm capacity 45 degrees: round: 240 mm capacity 45 degrees: flat: re. 240x150 / li. 240x100 mm capacity 60 degrees: round: 150 mm capacity 60 degrees: flat: 150x180 mm total connected load: 2,6 kW weight of the machine ca.: 550 kg dimensions of the machine ca.: 1800 x 1050 x 1950 mm semi-automatic band saw Furnishing: - Micro dosing system - 3000 mm feed roller conveyor - Coolant gun for cleaning the machine - Miter cut from 45° right - 60° left - automatic vice clamping + vice opening - automatic saw cut + automatic raising saw bracket The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 40 mm square edge steel: 40 mm L-beam: 120 x 120 x 10 mm pressure: 55 t engine output: 5,5 kW weight of the machine ca.: 1250 kg dimensions of the machine ca.: 1650 x 1100 x 1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mm pressure: 12 t cutting range: Breite x Länge 200 mm no. of strokes: 15 Hub/min cutting angle: 30 - 140 ° total power requirement: 4 kW weight of the machine ca.: 1,02 t dimensions of the machine ca.: 1065 x 900 x 1210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 50 mm roll diam. toproll: 155 mm roll diam. bottom roll: 155 mm total power requirement: 1,5 kW dimensions of the machine ca.: 1000x750x1400 mm weight of the machine ca.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 2,0 ° no. of strokes: 15 Hub/min back stop - adjustable: max. 1000 mm down holder: 14 Stück work height max.: 865 mm Column width: 3515 mm throat: 50.0 mm Control: D-Touch 7 oil volume: 200 l engine output: 15.0 kW voltage: 400 V weight: 7.650 kg range L-W-H: 4110 x 2200 x 2100 mm from a maintenance workshop (vehicle construction) maintained condition () New price ~ 41.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back ...

Max. Saw blade diameter: 370mm, mitre angle: -45 - +60°, length: 1050mm, width: 1000mm, height: 1850mm, weight: 450kg. Cutting capacity at 0°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 170x90mm. Cutting capacity at -45°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 125x90mm. Cutting capacity at +45°: (round) solid material: 90mm, (round) tube: 90mm, (square) tube: 90x90mm, (rectangular) tube: 90x90mm.

Cutting diameter: 290mm, cutting width 320mm, saw blade length: 3100mm, saw blade dimensions X/Y/Z: 3100mm/27mm/0.9mm, miter cuts min./max.: -60°/+60°, cutting speed: 20m/min - 100m/min. Weight: approx. 570kg, dimensions X/Y/Z: approx. 1800mm/950mm/2100mm. An on-site inspection is possible.

Description: Belt width 80 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 60 kg

Description: Width of belt 80 mm Motor 2-stage Collection bag must be replaced With replacement belts Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 50 kg

Hydraulic punching machine for holes / beans, type: hls-55 metallkraft 2008. The machine is in very good technical condition - like new. - pressure 55 tons - max diameter of punched holes fi 40x10mm, fi 20x20mm - engine power 5.5 kW - weight 1300 kg We add several sets to the machine. punches and dies for cutting holes / beans.