usado NILES para la venta

Torno paralelo NILES DLZ 400 IV Entre puntos: 1000 mm Maxi Ø en banco: 420 mm Maxi Ø sobre sillín: 225 mm Diámetro del husillo: Ø 52 mm Velocidad del husillo: de 45 a 2240 RPM Mandril de 3 mandíbulas Ø 250 mm (mandíbulas intercambiables) Roscados: Métrica + Whitworth Culata: CM5 Rápido en X Bomba de lubricante Voltaje: 380 V Longitud: 3000 mm Profundidad: 1500 mm Altura total: 1600 mm Peso: aprox 2,5 T

Torno de motor NILES DP1/S3 Año de fabricación: 1988 Fabricante: NILES Fabricado en Alemania La máquina casi no se usa, completa Datos técnicos: Altura del centro sobre la cama: 800mm Diámetro máx. de procesamiento sobre la cama: 1.600mm Diámetro máximo de procesamiento sobre el soporte: 1.250mm Diámetro mín. de la pieza de trabajo: 250 mm Peso máx. de la pieza de trabajo: 40.000kg Diámetro máx. de la pieza de trabajo: 1.250mm Cono de husillo interno (1:10): 120mm Gama de alimentaciones de soporte longitudinales: -1ª fila (ajuste continuo): 1-200mm/min -2ª fila (ajuste continuo): 36-3600mm/min Gama de alimentaciones de portaobjetos transversales: -1ª fila (ajuste continuo): 0,4-80mm/min -2ª fila (ajuste continuo): 14,4-1440mm/min Gama de feeds de diapositivas cruzadas: -1ª fila (ajuste continuo): 0,12-25mm/min -2ª fila (ajuste continuo): 4,5- ...

Torno vertical WMW NILES DMF 6300 Estado: Muy bueno, completo Técnicas: Diámetro de torneado: 6300 mm Diámetro de torneado, con soporte lateral: 6000 mm Grados de desplazamiento de los soportes verticales: +/-30 Desplazamiento del soporte lateral: 1800 mm Altura máx. de la pieza : 2500 mm Peso máx. de la pieza : 50000 kg Diámetro del mandril: 5300 mm Rango de velocidad: 0,35-14 rpm Velocidades de alimentación (16): 0,063-11,2 mm/omw. Velocidad rápida de los soportes: 1000 mm/min ¬ ¹ Velocidad rápida del soporte lateral: 500 mm/min ¬ ¹ Potencia de conexión: 120 kW Dimensiones de la máquina W: 14,40 x 8,20 x 8,70 m Peso de la máquina aprox.: 174.000 kg

DIÁMETRO MÁXIMO 800, MÓDULO MÁXIMO 14

MARCA: NILES AÑO: 1988 MODELO: DFS2-2 TIPO DE APLICACIÓN: TORNEADO UBICACIÓN: ALEMANIA TIPO DE MÁQUINA: TORNO DISPONIBILIDAD: INMEDIATA Información técnica UNIDAD DE CONTROL MARCA: FAGOR ACCIONAMIENTO PRINCIPAL RANGO DE VELOCIDAD DEL HUSILLO: 4000 1/MIN Información adicional BENEFICIOS DE LA MÁQUINA VENTAJAS TÉCNICAS DE LA MÁQUINA: - PORTAHERRAMIENTAS DE 12 PLIEGUES - GUÍAS ENDURECIDAS - ACCESORIOS ESTÁNDAR - SUBIR CATÁLOGO - FILTRO DE AIRE PARA MOTOR DE CC - EQUIPAMIENTO ADICIONAL SEGÚN B1. 2/3 - CORRIENTE TRIFÁSICO - VOLTAJE DE FUNCIONAMIENTO 380 VOLTIOS - FRECUENCIA 50 HZ -DC

turning diameter: 315 mm turning length: 1000 mm control: Siemens type: Sinumerik 802 D turning diameter over slide: 160 mm spindle hollow: 52 mm Tool changer: 12 turning speeds: 30-3300 U/min chip conveyor: total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 800 mm turning length: 4500 mm control: Siemens workpiece weight: 4000 kg Revolutions milling spindle: 1-5500 U/min milling spindle: HSk 100 type: 840 D positioning accuracy: 0,01 ° Torque: 3000 Nm transmission ratio: 2 turning speeds: 2430 U/min main drive: 77 kW steady: SMW Diameter: 140-510 mm coolant capacity: 980 l coolant pump: 80 Bar paper filter: 3-jaw-chuck diameter: 610 mm tail stock: Tool changer: swing diameter: 1100 mm total power requirement: kW weight of the machine ca.: 52 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2000 mm gear width: . mm max. module: 22 max. hob diameter: 250 mm hob turning speeds: 16-92 U/min total power requirement: 13 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-jaw-chuck diameter: 630 mm turning diameter over slide rest: 650 mm turning length: 500 mm turning dia. in gap: 1420 mm digital readout: Mitutoyo turning speeds: 3,55-710 U/min total power requirement: 24 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 850 mm turning length: 6100 mm control: Siemens type: 840 D turning diameter over slide: 570 mm Tool changer: 12 Pos turning speeds: U/min chip conveyor: 3-jaw-chuck diameter: 600 mm total power requirement: kW weight of the machine ca.: 17 t dimensions of the machine ca.: 12x2x2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 4000 mm turning diameter over slide rest: . mm turning length: 5000 mm total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1650 mm turning diameter over slide rest: 1200 mm turning length: 7500 mm turning dia. in gap: 2500 mm spindle diameter: 105 mm speed: 3,55 - 180 (x24) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitud de la mesa: - mm anchura de la mesa: - mm diámetro de la rueda de agarro: 400 mm máx. anchura de la muela: 50 mm reque de potencia total: 1,5 kW peso de la máquina ca.: 0,3 t dimensiones de la máquina ca.: 1 x 1 x 1 m Para pre-vestir las ruedas rectificadoras de engranajes aparte de la máquina, en particular para perfil ruedas de amolado para rectificado de dos flancos, módulo 12

diámetro de giro sobre la cama: 1650 mm diámetro de giro sobre el reposabogante: 1200 mm talla de giro: 7500 mm diámetro de giro: 2500 mm diámetro de la rueda: 105 mm velocidad: 3,55 - 180 (x24) U/min tensión: 380 V cono de potencia total: 45 kW peso de la máquina ca.: t dimensiones de la máquina ca.: m

control: Numeriksteuerung CNC 700 K total power requirement:28 KVA weight of the machine ca.:7,8 t dimensions of the machine ca.:6610 x 2280 x 2235 mm work height max.:1060 mm greates pass round over bed:305 mm spindle bore:82 mm Documents:vorhanden

weight of the machine ca.:3 t

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 8 mm -Price: per piece -Number: 10x available -Weight: 0.9 kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 6 mm -Price: per piece -Number: 40x available -Weight: 0.6 kg

Grinding wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 8 mm -Price: per piece -Number: 50x available -Weight: 0.9 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 50 mm -Outer: Ø 200 mm -Width: 40 mm -Price: per piece -Number: 14x available -Weight: 2.1 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 40 mm -Number: 7x discs available -Price: per piece -Weight: 1.9 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 40 mm -Price: per piece -Number: 8x available -Weight: 2.2 kg

Grinding wheel, cup wheel, bench grinder, surface grinder, cylindrical grinder -Manufacturer: Niles, grinding wheel 20 Jot - Inside: Ø 32 mm -Outside: Ø 200 mm -Width: 20 mm -Weight: 1.3 kg

Grinding wheel, cup wheel, bench grinder, surface grinder, cylindrical grinder -Manufacturer: Niles, grinding wheel - Inside: Ø 32 mm -Outside: Ø 200 mm -Width: 20 mm -Number: 2x discs available -Price per piece -Weight: 1.4 kg/pc.

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 6 mm -Number: 2x discs available -Price: per piece -Minimum purchase: complete -Weight: 0.6 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 6 mm -Number: 9x discs available -Price: per piece -Weight: 0.4 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 250 mm -Width: 32 mm -Number: 1x discs available -Price: per piece -Weight: 3 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 19 mm -Number: 1x discs available -Price: per piece -Weight: 1.2 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 32 mm -Number: 1x discs available -Price: per piece -Weight: 2.1 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 20 mm -Number: 1x discs available -Price: per piece -Weight: 1.3 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 25 mm -Number: 3x discs available -Price: per piece -Weight: 1.9 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 30 mm -Number: 9x discs available -Price: per piece -Weight: 1.8 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 30 mm -Number: 6x discs available -Price: per piece -Weight: 1.8 kg

Niles brand german mali borverk bench x : 1600 mm y : 1600 mm z : 1800 mm Turntable works flawlessly. gear sets bronze nut all maintenance is done. It has an opening mirror. counter bed is available. The opposite bed was sandblasted and painted for cleaning. it is well maintained. There is no non-working place in the electrical unit. the machine is about 20 tons 11 tons of material was processed on the table before. By producing the apparatus, it can be processed with a chuck that opens pipes up to q 1800 mm diameter. gasket surface can be opened to flanges.

NILES lathe turning diameter approx. 700 mm turning length 1000 mm including new measurement. The machine is in good technical condition, it is possible to test it by agreement.

Manufacturer Niles Model ZSTZ 1250 Year 1986 Maximum wheel diameter : 1250 mm Module + : 30

Turning diameter: 1300 mm Turning length: 4500 mm Turret positions: 1 Positions ATC: 142   Number controlled axis: 7   CNC Brand: Siemens CNC Model: 840D NILES SIMMONS N50/2 MC  TURN MILL DRILL MACHINING Make            : NILES SIMMONS Germany Typ            &nbs p; : N 50 / 2 MC x 4500 Age            &nbs p; : 2008   Swing over slide              : 1.250 Swing over bed               : 1.300 DBC turning length          : 4.500 Spindle bore     &nb ...