usado ROEHM para la venta

Mandíbula de sujeción de garra para piezas crudas y piezas de sierra. Sólo 2,5 mm de pérdida de material. Tanto para varillas de tornillo mecánicas como hidráulicas. Con 1 abrazadera de procesamiento de 5 páginas posible. Longitudes: 90, 125, 160, 200mm Escriba para palos de tornillo ALLMATIC, ROEHM, GRESSEL. Directamente del fabricante, barato!

RÖHM KFD-1000/3 3/32 Mandril motorizado: sin usar/nuevo Año de construcción: 2019 Mandril motorizado RÖHM KFD-1000/3 3/32 ZA520 M30 OD KH42 BH15,2 Artículo No.: 84662091 País de origen: Alemania cilindro de viruta sólido H OVS-200 SV 4.500 RPM CARRERA 50 Artículo No.: 84662091 Nº EAN: 4019208232577 País de origen: Alemania Control de carrera KP F90 OVS-200 Artículo No.: 84662091 Nº EAN: 4019208235059 País de origen: Alemania Todos los demás accesorios que se muestran en la foto no están incluidos en el volumen de suministro, por lo que no forman parte de esta venta. El volumen de suministro solo incluye los accesorios que se enumeran expresamente aquí, en la confirmación del pedido y en la factura. Manual de instrucciones – ilustración, contenido e información sin garantía, por lo tanto no vinculante – ver "PDF. En ese momento NUEVO PRE ...

Nuevo planboard Roehm 600 mm Grabación directa Camlock - 8

Eléctrico - Hydr.- Vicios de la Máquina Número de oferta: 50105 Hacer: R-HM Tipo: 744 - 05 Máquina No: xxxx Construido: aprox. 1993 Datos técnicos: - Eléctrico - Hydr. Vicios de la máquina - con unidad hidráulica separada - y los botones de pie E. para abrir y - cierre las mordazas de sujeción. - Ancho de la mandíbula 200 mm - Altura de la mandíbula 75 mm - Rango de sujeción aprox. 0 - 350 mm - Altura de la guía aprox. 100 mm - Altura total 185 mm - Unidad hidráulica separada r-HM , tipo HA 707 - 80 - Arranque 400 V / 0,37 kW - Peso aprox. 100 Kg - Requerimiento de espacio aprox. L a 850 x W 280 x H 185 mm

Diámetro: 630 mm. El cuerpo del mandril de mini torno de 4 mandíbulas está hecho de hierro fundido, Cono de bayoneta 8.

Forro de cuatro mandíbulas ø 500 mm muy buen estado Soporte de husillo con base de horneado y horneado superior

Nuevo mandril de tres mordazas usado RÖHM DURO T250. Mandril de barra de cuña Mandril de tres mordazas incl. 3 cierres a presión ♦ Receptáculo cilíndrico para brida de husillo Fotos: Portabrocas de tres mordazas n.º 437478-1526 ♦ Con mordazas base tan buenas como nuevas y mordazas superiores nuevas: ♦ Con llave de alimentación incluida: Debido al peso, el forro, solo debe ser puede ser recogido o enviado por un agente de carga. Si tiene alguna pregunta, no dude en ponerse en contacto con nosotros.

Portabrocas giratorias RÖHM Diámetro 160 mm 3- Hornear máx. 3600 rpm tan bueno como nuevo!

Muy buen mandril de tres mordazas centricamente emocionante øA= 315 mm ø I= 100 mm receptáculo cilíndrico Brida de mandril DIN 55027 bajo pedido incl. tan buenas como las mordazas de perforación nuevas Mordazas giratorias bajo pedido Reenvío o recogida

Número de stock: 3805 Máquinas vicio Fabricante: ROEHM, Tipo: RKK 2 Nº máquina: 983 004 N Características técnicas: Ancho 115mm Max. öfning das schaubstock 0-170 mm largo: 350 mm, Altura: 133 mm, Ancho: 125 mm, Peso: 33 Kg

Número de stock: 3806 Máquinas vicio Fabricante: ROEHM, Tipo: RKK 2 Máquina No .: 151953 0004 P, Año de fabricación: 0 Características técnicas: Ancho 115mm Max. öfning das schaubstock 0-170 mm largo: 350 mm, Altura: 133 mm, Ancho: 125 mm, Peso: 33 kg

Mandíbula de prisma, 125 mm de ancho para sujetar piezas redondas, tipo 1, D4-20 mm y 2x D6-40 mm, Tipo 2, D4-20mm y D9-62mm

diameter:310 mm weight of the machine ca.:0,03 t bore:65 mm

faceplate diameter:620 mm weight of the machine ca.:0,15 t Bore:130 mm

faceplate diameter:500 mm weight of the machine ca.:0,1 t 4-jaw faceplate for studs and locknut

Description: Additional information: - Manually operated, - as a range of clamping mandrels for different clamping diameters, - with clamping sleeve, technical features (hardened, low-wear version / MZE), area of application: - internal clamping of round workpieces. - measuring operations and light grinding operations. - ideal for large clamping lengths or long workpieces. Advantages: - Tool-free quick change of the clamping sleeve, - High concentricity and repeatability, - High flexibility thanks to mounting on the shaft or between centers, - Short changeover times, Contents in a storage box Quantity = 5 pieces: - Basic mandrel MZE, size 2, with centering hole, for internal clamping No. 315002 - Basic mandrel MZE, size 3, with centering hole, for internal clamping No. 315003 - Basic mandrel MZE, size 4, with centering hole, for internal clamping No. 315004 - Basic mandrel MZE, size 5, w ...

Description: . Approx. Onsite Dimension. (l x w x h): 300 x 300 x 200 mm, weight approx.: 5 kg

Description: Jaw width: 160 mm Approx. Onsite Dimension. (l x w x h): 600 x 250 x 160 mm, weight approx.: 80 kg

Description: Jaw width: 125 mm Approx. Onsite Dimension. (l x w x h): 550 x 200 x 150 mm, weight approx.: 70 kg

Description: Jaw width: 125 mm Approx. Onsite Dimension. (l x w x h): 550 x 200 x 150 mm, weight approx.: 70 kg

Description: Jaw width: 125 mm Approx. Onsite Dimension. (l x w x h): 430 x 140 x 140 mm, weight approx.: 70 kg

Description: Jaw width: 10 mm Approx. Onsite Dimension. (l x w x h): 380 x 160 x 140 mm, weight approx.: 50 kg

Description: Jaw width: 125 mm Approx. Onsite Dimension. (l x w x h): 600 x 150 x 150 mm, weight approx.: 70 kg

Machine vice, stable vice, drill vice -Back width: 110 x 30 mm -Tension depth: max 132 mm -Tension: centric -Dimensions: 345/135/H95 mm -Weight: 11.7 kg

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck, three-jaw lathe chuck, face spiral chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 380 mm -Passage: Ø 115 mm -Holder: M230 x 4 / cone 125 - 147 mm -Weight: 92kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Rezess: Ø 80 mm -Hole circle: Ø 127 mm -Through hole: Ø 40 mm -Weight: 40 kg

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 200 mm -Single and complete jaws: adjustable -Bajonet: short cone flange, cone size 6, bolt circle 133.4 mm -Passage: Ø 55 mm -Weight: 23 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 160 mm -Passage: Ø 42 mm -Hole circle: Ø 133 mm -Receptacle: Short cone 6 / cone 103 - 105 mm -Weight: 10.5 kg

Lathe driver, center turning device -Outer: Ø 220 -Cone: Ø 106 mm -Short taper: 6 -Hole circle: Ø 133 mm -Weight: 6.4 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 240 mm -Passage: Ø 53 mm -Bolt circle: Ø 70 mm -Weight: 27 kg

moving point, moving center point, moving Morse taper, moving center point, moving lathe point, center point -Manufacturer: Rohm, revolving center point with draw-off nut -Type: size 486 -Recording: MK6 -Dimension: Ø 155 x 360 mm -Weight: 13 kg

live point, live center, live morse taper, live -Manufacturer: Röhm, live center type 110 H -Barrel tip: shaft-bearing -Intake: MK5 -Number: 2x center point available -Price per piece -Dimensions: Ø 92/255 mm -Weight: 4.7 kg/pc.

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Thread: M16 -Weight: 83 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Rohm, three-jaw chuck with clamping plate -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 130 mm / M8 -Clamping plate: approx. 250 x 250 mm, dimensions see photo -Weight: 25kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 240 mm -Passage: Ø 77 mm -Hole circle: Ø 220 mm -Weight: 18 kg

revolving tip, revolving center point, revolving Morse taper, revolving -Manufacturer: Röhm, rotating centering tip type 110 H -Barrel tip: shaft-mounted -Recording: MK5 -Quantity: 1x centering tip available -Price per piece -Dimensions: Ø 90/257 mm -Weight: 4.4 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Clamping force: max. 90 KN -Equipment: short taper 6 (106 mm) -Chuck size: Ø 210 mm -Weight: 22 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice -hydraulic voltage defective -is sold as dismanteld -Jaw width: 160 mm -Back height: 53 mm -Span width: max. 170 mm -Height support: 80 mm -Weight: 62 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Take shaft: MK3 -9x: sleeve MT1 -7x: sleeve MT2 -4x: sleeve MT3 -Thread recordings: 3 -Weight: 16.8 kg

Drill chuck, keyed drill chuck -Manufacturer: Röhm, drill chuck Gear ring drill chuck MK2 -Type: S 1.5-13 1/16-1/2 J2 S2 -Clamping range: 1.5-13 mm 1/16-1/2 -Dimension: Ø 44 x 150 mm -Weight: 0.5 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 80 mm -without: interchangeable jaws -Flange: 175 mm -Passage: Ø 19 mm -Dimensions: Ø 175 x 250 mm -Weight: 8.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Rohm, base jaws for four-jaw chuck 2 set -Type: ID.: 107546 jaw width 20 mm -1 set: with soft top jaws, width 30mm -Price/sale: only complete -Dimensions: 200/90/H70 mm -Weight: 4.7 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 125 mm -without: interchangeable jaws -Passage: Ø 32 mm -Number: 1x feed available -Price: per piece -Weight: 5.4 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Jaw width: 200 mm -Back height: 65 mm -Span width: max. 345 mm -Dimensions: 730/300/H170 mm -Weight: 125 kg

Machine vise, sturdy vise, drill vise -Span width: 138 mm -Jaw width: 160 mm -Back height: 45 mm -Dimensions: 500/350/H160 mm -Weight: 50 kg

moving point, moving center point, moving Morse taper, moving center point, moving lathe point, center point -barrel tip: shaft-mounted -Recording: MK6 -Number: 1x centering points available -Price: per piece -Weight: 8 kg

Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 220 mm -Bolt circle: Ø 134 mm -Hole: short taper 6, cone Ø 103 - 106 mm -Dimensions total Ø 220 x 190 mm -Weight: 20.1 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Passage: Ø 103 mm -Hole circle: Ø 195 mm -Weight: 56 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg