- 1,5-13 mm MK2(1)
- 114N MK6(1)
- 125mm width(1)
- 173 MK5(1)
- 1E1(1)
- 1E2UHS316(1)
- 3 Backenfutter(1)
- 486 MK6(1)
- 55021/22-6 Ø 220 mm(1)
- 705-SG4(2)
- 744 - 05(1)
- A240(1)
- Backen Breite 200 mm(1)
- Breite 24 mm(1)
- DREIBACKENFUTTER DURO T250(1)
- Durchmesser 125 mm(1)
- Durchmesser 200 mm(2)
- Durchmesser 220 mm(1)
- Durchmesser 240 mm(2)
- Durchmesser 260 mm(1)
- Durchmesser 350 mm(1)
- ES Ø 250(1)
- F.A 260 Ø 260 mm(1)
- Gr.3xMK3(1)
- ID.: 107546(1)
- KFD-1000/3 3/32(1)
- KFD-HE 210/3(1)
- KFD-HS(1)
- KFH-140(1)
- KOMPAKT SPANNER(1)
- KZDF-330/3/3(2)
- MK5 110 H(2)
- NC KOMPAKT SPANNER(2)
- NC-KOMPAKT-SPANNER(1)
- NC-KOMPAKTSPANNER RKE-L 125(1)
- Oelverteiler Mover-3 fach(1)
- P315(1)
- RB Schraubstock(1)
- RKE 160(1)
- Rkk 2(2)
- RMB4 Spannweite 138 mm(1)
- Spannweite 132 mm(1)
- Spannweite 170 mm(1)
- Spannweite 345 mm(1)
- UZ Gr. 4(1)
- Vierbackenfutter(1)
- Vierbackenfutter Ø315 mm(1)
- ZG 500 Planspiralfutter(1)
- ZS Ø 80(2)
- Ø 160 mm(2)
- Ø 190 mm / 7 1/2 (1)
- Ø 200 mm(1)
- Ø 240 mm(2)
- Ø 250 mm(1)
- Ø 315 mm(2)
- Ø 380 mm(1)
usado
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 350 mm -Rezess: Ø 80 mm -Hole circle: Ø 127 mm -Through hole: Ø 40 mm -Weight: 40 kg
usado
Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 200 mm -Single and complete jaws: adjustable -Bajonet: short cone flange, cone size 6, bolt circle 133.4 mm -Passage: Ø 55 mm -Weight: 23 kg
usado
Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 160 mm -Passage: Ø 42 mm -Hole circle: Ø 133 mm -Receptacle: Short cone 6 / cone 103 - 105 mm -Weight: 10.5 kg
usado
Lathe driver, center turning device -Outer: Ø 220 -Cone: Ø 106 mm -Short taper: 6 -Hole circle: Ø 133 mm -Weight: 6.4 kg
usado
Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 240 mm -Passage: Ø 53 mm -Bolt circle: Ø 70 mm -Weight: 27 kg
usado
moving point, moving center point, moving Morse taper, moving center point, moving lathe point, center point -Manufacturer: Rohm, revolving center point with draw-off nut -Type: size 486 -Recording: MK6 -Dimension: Ø 155 x 360 mm -Weight: 13 kg
usado
live point, live center, live morse taper, live -Manufacturer: Röhm, live center type 110 H -Barrel tip: shaft-bearing -Intake: MK5 -Number: 2x center point available -Price per piece -Dimensions: Ø 92/255 mm -Weight: 4.7 kg/pc.
usado
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Thread: M16 -Weight: 83 kg
usado
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg
usado
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Rohm, three-jaw chuck with clamping plate -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 130 mm / M8 -Clamping plate: approx. 250 x 250 mm, dimensions see photo -Weight: 25kg
usado
Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 240 mm -Passage: Ø 77 mm -Hole circle: Ø 220 mm -Weight: 18 kg
usado
revolving tip, revolving center point, revolving Morse taper, revolving -Manufacturer: Röhm, rotating centering tip type 110 H -Barrel tip: shaft-mounted -Recording: MK5 -Quantity: 1x centering tip available -Price per piece -Dimensions: Ø 90/257 mm -Weight: 4.4 kg
usado
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Clamping force: max. 90 KN -Equipment: short taper 6 (106 mm) -Chuck size: Ø 210 mm -Weight: 22 kg
usado
Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice -hydraulic voltage defective -is sold as dismanteld -Jaw width: 160 mm -Back height: 53 mm -Span width: max. 170 mm -Height support: 80 mm -Weight: 62 kg
usado
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Take shaft: MK3 -9x: sleeve MT1 -7x: sleeve MT2 -4x: sleeve MT3 -Thread recordings: 3 -Weight: 16.8 kg
usado
Drill chuck, keyed drill chuck -Manufacturer: Röhm, drill chuck Gear ring drill chuck MK2 -Type: S 1.5-13 1/16-1/2 J2 S2 -Clamping range: 1.5-13 mm 1/16-1/2 -Dimension: Ø 44 x 150 mm -Weight: 0.5 kg
usado
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 80 mm -without: interchangeable jaws -Flange: 175 mm -Passage: Ø 19 mm -Dimensions: Ø 175 x 250 mm -Weight: 8.9 kg
usado
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Rohm, base jaws for four-jaw chuck 2 set -Type: ID.: 107546 jaw width 20 mm -1 set: with soft top jaws, width 30mm -Price/sale: only complete -Dimensions: 200/90/H70 mm -Weight: 4.7 kg
usado
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 125 mm -without: interchangeable jaws -Passage: Ø 32 mm -Number: 1x feed available -Price: per piece -Weight: 5.4 kg
usado
Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Jaw width: 200 mm -Back height: 65 mm -Span width: max. 345 mm -Dimensions: 730/300/H170 mm -Weight: 125 kg
usado
Machine vise, sturdy vise, drill vise -Span width: 138 mm -Jaw width: 160 mm -Back height: 45 mm -Dimensions: 500/350/H160 mm -Weight: 50 kg
usado
moving point, moving center point, moving Morse taper, moving center point, moving lathe point, center point -barrel tip: shaft-mounted -Recording: MK6 -Number: 1x centering points available -Price: per piece -Weight: 8 kg
usado
Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 220 mm -Bolt circle: Ø 134 mm -Hole: short taper 6, cone Ø 103 - 106 mm -Dimensions total Ø 220 x 190 mm -Weight: 20.1 kg
usado
Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Passage: Ø 103 mm -Hole circle: Ø 195 mm -Weight: 56 kg
usado
Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Rohm, four-jaw chuck Ø 315 mm -Throughout: Ø 105 mm -Pole circle: Ø 235 mm / M20 -Take: short taper 11 -Weight: 56 kg
usado
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 24 mm -Dimensions: see photo technical drawing -Total dimensions: 90/70/H65 mm -Total weight: 2.2 kg
usado
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Throughout: Ø 77 mm -Weight: 18 kg
usado
Four-jaw chuck, four-jaw lathe chuck, precision four-jaw chuck, chuck, faceplate, 4-jaw chuck -Manufacturer: Röhm, Precision four-jaw chuck Ø 260 mm -Passage: Ø 70 mm -Bolt circle: Ø 105 mm -Recording: Short cone 5 -Jaws: individually and fully adjustable -Weight: 27.4 kg
usado
Three-jaw chuck, three-jaw lathe chuck -Chuck size: 240 mm -Mounting flange: M80 x 6 mm -without: interchangeable jaws -Weight: 26 kg
usado
Three-jaw chuck, three-jaw lathe chuck -Chuck size: O 80 mm -Jaws: 1 set -Flange: 177 mm -Passage: O 19 mm -Dimensions: O 177 x 190 mm -Weight: 8.4 kg
usado
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Passage: Ø 55 mm -interchangeable jaws -Short taper: 4 -Cone: Ø 63.5 mm -Number: 1x feed available -Price: per piece -Weight: 18.5 kg
usado
Precision four-jaw chuck, chuck, face plate, 4-jaw chuck -Manufacturer: Rohm, precision four-jaw chuck O 260 mm -Throughout: Ø 70 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Beeks: individually and completely adjustable -Weight: 39 kg
usado
Three-jaw chuck, three-jaw lathe chuck -Handover/sale: in the current condition as seen -Damage: see photos -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 190 mm -Throughput: Ø 57 mm, lining Ø 75 mm -Bolt circle: Ø 168/14 mm -Weight: 16.4 kg
usado
Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: 500/510/H670 mm -Pump max. Pressure: 30 bar -Pump max. Liter output: l/min -1x drive: 0.75 kW 1380 rpm -Hydraulic filter -Hydraulic tank -Control valve -Dimensions: 500/510/H670 mm -Weight: 88 kg
usado
Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -clamping force: max. 1800 kp -with: interchangeable jaws -Chuck size: Ø 140 mm -short taper -Transport dimensions: 200/200/H150 mm -Weight: 12.1 kg
usado
revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center center -Manufacturer: Röhm, rotating center point -Type: Size 173 -Recording: MK5 -Dimensions: Ø 120 x 215 mm -Weight: 4.7 kg
usado
Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: B1A8E -Pump max. Pressure: 80 bar -Pump max. Liter output: 12 l/min -1x drive: 1.1 kW 1400 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 500/410/H670 mm -Weight: 100 kg
usado
Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Jaw width: 200 mm -Back height: mm -Span width: max. mm -without: counter bearing -Dimensions: 470/200/H180 mm -Weight: 62 kg
usado
Three-jaw chuck, three-jaw lathe chuck -1 set: hard outer jaws -1 set: soft jaws -Chuck size: Ø 160 mm -Weight: 8.5 kg
usado
Hydraulic vice, machine vice, NC compact vice -transfer in current condition as seen -Vise has no spindle and is therefore sold as dismantled -4x clamping jaws: 200 x 60 mm -2x clamping jaws: 160 x 50 mm -Dimensions: 530/160/H165 mm -Weight: 104 kg
usado
Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Rohm, three-jaw chuck with clamping plate -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Clamping plate: 500 x 310 mm -Dimensions: 500/310 / H300 mm -Weight: 72 kg
