trabajo con chapas de metal usadas para la venta (3,309)

material width:450 mmmaterial thickness:1,0 - 14,0 mmcoil weight:10,0 tcoil internal diameter:470 - 520 mmcoil external diameter:1100 - 2000 mmno. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mmnumber of draw-in rolls:2 inlet roll diameter:160 mmmin. material width:100 mmspeed:15 m/minpower requirement:75,0 kWweight of decoiler:6,4 tweight of straightening machine:12,8 tdimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mmdimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mmstraightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450

material width coil line:600 mmcoil weight in kg:2 x 3000 kgcoil internal diameter:460 - 630 mmcoil external diameter:1500 mmmaterial thickness coil line:0,5 - 3,0 mmNumber of Straightening rolls:9 roll diameter:30 mmmaterial cross-cut:1200 mm²weight:9,5 tDimensions (WxDxH):4,3 x 2,6 x 2,6 mstraightening machine:30.600/9 double decoiler:Kohler, 3000.2 ausiliary drive:hydraulic lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic; motoric driven

- Condiciones de funcionamiento de esta máquina: sin comprobar. - Este artículo se entrega cargado sobre camión. Los costes de desmontaje y carga son los que se especifican como costes adicionales. Auction-ID: A7-50834-602

material width:250 mmmaterial thickness:0,5 - 4,0 mmno. of straightening rolls:9 straightening roll diameter:60 mmnumber of draw-in rolls:2 power requirement:3,8 kWWeight:0,8 tDimensions (WxDxH):1,6 x 0,8 x 1,5 m

- Fuerza 4100 kg. - Accionamiento mediante pedal. - Condiciones de funcionamiento de esta máquina: sin comprobar. - Este artículo se entrega cargado sobre camión. Los costes de desmontaje y carga son los que se especifican como costes adicionales. Auction-ID: A7-50834-604

sheet width:400 mmplate length:500 mmplate thickness:4 mmtotal power requirement:0,5 kWPunching and Nibling machine with 6 x 3 mm nibling and 4 mm for cuting

material width:500 mmcoil weight:3,0 tmaterial thickness:0,2 - 2,5 mmcoil internal diameter:470 - 530 mmcoil external diameter:1400 mmno. of straightening rolls:9 straightening roll diameter:40 mmnumber of inlet and outlet rolls:4 material cross-cut:1200 mm²speed:1,5 - 30 m/mindimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 mweight decoiler:1,1 tdimensions straightener (WxDxH):3,3 x 1,3 x 2,7 mweight straightener:3,0 tstraightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic

material width:600 mmmaterial thickness: - 4,0 mmno. of straightening rolls:21 straightening roll diameter:30 mmmaterial cross-cut:1800 mm²speed:6 - 36 m/minPower capacity:4,5 kWWeight:2,0 tDimensions (WxDxH):1,5 x 2,0 x 1,9 m

material width:70 mmmaterial thickness:0 - 1,5 mmfeed length:100 mmmaterial cross-cut:60 mm²feeding force:400 Nclamping force of feeding pincer:1300 Nair pressure - required:3 - 6 barWeight:0,01 tDimensions (WxDxH):0,4 x 0,4 x 0,7 m

sheet width:2000 mmplate thickness:1.8 mmControls:SIEMENS S7 PRESS DESIGN:. - frame design : H-frame :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - height above floor level:375 mmRAM:. - ram force:800 to - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /minRAM (MECHAN. PRESS):. - ram adjustment:350 mmTOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):3100 mm - Free passage between side columns (width):2560 mm - Free passage between side columns (height):1500 mmDECOILER:. - design : single coil :. - sheet width max:2000 mm - sheet width (min):400 mm - max. weight of coil:30 to - max. di ...

band width:1050 mmplate thickness:8 mmnumber of rolls:8 DECOILER:. - design : single coil :. - sheet width max:1050 mm - sheet width (min):150 mm - max. weight of coil:22 to - max. diameter of coil:2000 mm - min. internal diameter of coil:570 mmFEEDERS:. - feeder: type : roll feeder :. - sheet width max:1050 mm - sheet thickness max:150 mmLEVELER UNIT:. - sheet width max:1050 mm - sheet width (min):150 mm - sheet thickness max:8 mm - sheet thickness (min):2.5 mm - number of leveler rolls:8 - diameter of leveler rolls:96 mm - distance between leveler rolls:104 mm - diameter of feed rolls:160 mm - feed velocity min.:2 m/min - feed velocity max.:43.5 m/minELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 HzTechnical description :Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of:- LAWECO COIL LO ...

sheet width:5040 mmplate thickness:2 mmtotal power requirement:12 kWweight of the machine ca.:9,4 tdimensions of the machine ca.:6200× 1300 ×1900 mmworking width:5000 mmcontrol:Fasti Matik stroke of upper beam:500 mmadjustment of lower beam:u.Biegewange 80 mmcontrol cabinet:1000 x 850 x1450 mmDocuments:vorhanden

Auction-ID: A3-46142-11241

sheet width: 6500 mmplate thickness: 3 mmback stop - adjustable: 1000 mmdimensions: 7300x2400x2300 mmWeight: 20000 kgEquipment/accessories:- 1 x set of knivesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

puncher: 55 tround bar steel: 40 mmsquare edge steel: 40 mmL-beam: 120 x 120 x 10 mmhole punching press: capacity (dia. x thick.): Ø 40 x 10 mmshear: flat material: 300 x 15 mmthroat: 250 mmwork stroke: 60 mmwork height max.: 1085 mmtotal power requirement: 4,0 kWweight: 1300 kgrange L-W-H: 2000 x 900 x 1800 mmEquipment:- Electro-hydraulic structural steel shears with 4 workstations Flat steel shears Structural steel shears Punch press Notching station- Driven by two hydraulic cylinders- Infinitely variable stroke adjustment- Support table at the hole-punching The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mmplate thickness: 6.0 mmcutting angle adjustment: 0.5 - 3.0 °down holder: 12 Stückno. of strokes: 8 - 14 Hub/minback stop - adjustable: 750 mmwork height max.: 770 mmControl: konv. total power requirement: 7.5 kWweight of the machine ca.: 3800 kg.range L-W-H: 2650 x 2100 x 1750 mm From a maintenance workshop Very good condition () Features- Robust, slide-guided electro-hydraulic panel shear- HACO control panelâfront left Easy operation directly at the cutting table Adjustment of cutting angle and backgauge Emergency stop button, latching - Electromotor-driven material stop/backgauge Fine adjustment with handwheel (front left)- Electro-hydraulic cutting angle adjustment- Manual cutting gap adjustment, from the front Eccentric adjustment - 1x long side stop - Front finger guard- 1x freely movable foot switch- Rear sheet metal chute- Operating instructionsThe data f ...

sheet width: 1550 mmplate thickness: 6.5 mmpre-bending: 4.5 mmdiameter of upper rolls: 150 mmside roll diameter: 130 mmdiameter of lower rolls: 150 mmdistance: max. OW zu UW 20.0 mmvoltage: 400 Vtotal power requirement: 1.1 + 2.2 kWweight of the machine ca.: 2370 kgrange L-W-H: 3300 x 1150 x 1110 mm Rarely used, according to the previous owner Current new price approx. 25.000 euros Special price upon request (!)Features:- Electro-hydraulic 4-roll plate bending machine Equipped with a driven top roll and bottom roll Sturdy welded construction- Application range: Light to heavy-duty sheet metal processing (steel/aluminum/stainless steel)- Electro-hydraulic adjustment of the bottom and side rolls- Linear guidance for the side rolls- Top roll driven by a robust electric motor and planetary gearbox- Mobile, separate control console- Hardened, crowned rolls (SAE 1050 / CK 45 steel)- Conical be ...

: neu : 090253 : November 2026, Zwischenve : Türkei : 21600 €: 414.72 €: 2550 mm: 2.5 mm: 35 1/min: 750 mm: 3 kW: 2 Stk.: 850 mm: 400 mm: 2860 mm: 1350 mm: 1200 mm: 1500 kgMotorized back gauge 750 mmPneumatic sheet supportHolddown with rubberMoveable foot switchSquaring arm2 supporting armsPhotocell-protection on the back sideUser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-50373-2272

Auction-ID: A1-50373-2271

Auction-ID: A1-47366-174

Prensa hidráulica para abrir tuberías hidráulicas, equipada con todos los troqueles necesarios para tuberías de 0,5 a 50 mm, nunca se utilizó a 0 horas y se empaquetó en una caja de madera Dimensiones totales: 1000 x 1000 x 1200 mm Peso: 310 kg Auction-ID: A7-50799-110

Auction-ID: A1-47366-49

Prensa hidráulica para abrir tuberías hidráulicas, equipada con todos los troqueles necesarios para tuberías de 0,5 a 50 mm, nunca se utilizó a 0 horas y se empaquetó en una caja de madera Dimensiones totales: 1000 x 1000 x 1200 mm Peso: 310 kg Auction-ID: A7-50796-110

Auction-ID: A1-47366-81

Auction-ID: A1-47366-80

 The FARROS BSA600 – KS1200 is a high-quality Swiss-engineered column and boom grinding system, specially developed for grinding, weld preparation, back gouging and surface finishing of large and heavy steel components.FARROS is a well-established Swiss manufacturer with decades of experience in industrial grinding technology. FARROS machines are internationally recognised for their robust construction, precision, reliability and long service life, even under demanding industrial production conditions.The BSA600 – KS1200 is particularly suitable for manufacturers of pressure vessels, boilers, large-diameter pipes, wind turbine towers, offshore structures, storage tanks and heavy welded steel constructions.The KS1200 grinding head is designed for demanding applications such as longitudinal and circumferential weld grinding, removal of weld reinforcement, back gouging, weld seam prepa ...

Utilizó prensa ALOUMIL para cortar y puncionar perfiles de aluminio, accionada por aire (accionamiento neumático). Utilizada para cortar y perforar perfiles de aluminio en la fabricación de ventanas y puertas de aluminio. Características técnicas: - Marca: ALOUMIL - Funcionamiento neumático (aire comprimido) El modelo exacto y las especificaciones técnicas adicionales (capacidad, dimensiones, peso) no están confirmados para esta unidad específica; por favor, contáctenos para más detalles. Revisado y listo para funcionar Auction-ID: A7-50988-38

Auction-ID: A1-50476-321

Auction-ID: A1-50476-313