espalhadores de cola usadas para venda (581)

Dimensions (L/W/H): 2650x640x1400 mmWeight: 700 kgTotal power requirement: 5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3200x780x1500 mmWeight: 800 kgTotal power requirement: 8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 8 kgTotal power requirement: 0,9 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Revista Edge IMA - 6x - 24x revista fold - 550 ou 800 mm de diâmetro da bobina Várias versões disponíveis em stock. Preço sob consulta.

Unidade de chanframento IMA Tipo: 08.055 - diferentes potências do motor disponíveis Preço sob consulta (dependendo da versão)

Vários motores de fresagem Marca: Perske - em diferentes versões disponíveis a partir do stock (0,2 a 8 kW) Preço sob consulta (dependendo da versão) Por favor, deixe-nos saber qual especificação você está procurando: - potência - tipo eixo - binário - tipo - tensão

The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm

várias zonas de pressão IMA - a partir do stock - preço sob consulta

Raspador plano IMA Tipo: 08.50 Preço sob consulta

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left hand site Seite: 1 Infeed fence  Infee ...

Contour edge bander Fabrikat: VITAP Type: BC91 EVO New machine Max. flexibility by means of a smart construction - For gluing chamfers on rectangular or formed workpieces - Tilting table 0°-45° - To glue pieces 10-60 mm thickness - Edge material: PVC, melamine, veneer, plastic, laminate, solid wood - Nr. 2 glue spreading rollers - Cutting guillotine up to 3 mm thickness - Glue pot (kg 3), with electronic adjustable heating system - Band length measuring by means of a digital electronic counter - Tape cut by foot pedal to edge just one piece and measuring edge length - Feeding speed adjustable from 7m to 20m per min. Solid Phenolic table - Easy to clean - With no transmission of heat - Plastic cups to raise the piece above the table - 2 kg vitap glue 280.00 for test - CE standards Optional: - Enlarged tape plate 800 mm - Semi-automatic end-c ...

Glue application machine Brand: OMMA Type: FSC 600 New machine Technical details: Useful working width mm 600 Maximum working thickness mm 90 Working speed mt/min 19 Height of working level mm 905 Spreading rollers Ø mm 185 Standard grooving lines/inch 14 Installed power kW 0.37 Colour Ral 7035 Command side (compared to working direction) Right Standard voltage v 400/50/3 Technical equipment: - Spreading rubber rollers coated with grinded surface. - Thickness graduate indicator. - Top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation. - Parallelism regulation between spreading rollers. - Rollers protection with security plate and foot control in front of the machine that stop immediately the machine if activate. - Security front foot barrier. - Steel zinc collecting tank of the cleaning water. - E ...

Placar viu IMA - controlável

Unidade de corte de precisão IMA Tipo: 08.376

Unidade Grooving IMA Tipo: 08.181 - apenas grooving de lado

Unidade para grooving / corte de precisão Marca: IMA

Unidade para corte de precisão Marca: IMA

Unidade de colagem IMA completo com carregador de bobina dupla, dispositivo de aplicação de cola e zona de pressão

Exaustores acústicos für IMA edge banding machines em várias versões e dimensões disponíveis em stock Modificações / novas lacagens disponíveis por uma sobretaxa.

Lixadeiras Marca: Heesemann Tipo: M2

Unidade de lixamento Marca: HOMAG Tipo: PS10

Unidade de fresagem IMA - versão pesada - 600 mm de altura - motores, conforme solicitado Preço sob consulta (dependendo do equipamento)

Granulate supply Make: ADOLPH Type: G-Trans 25 for continuous granulate supply on edge banding machines technical details: System for a machine line with 4 pre-melters (standard) Pos.1.1 1 basic unit for bag-emptying G-Trans® 25 Portal for Big-Bags with hanging emptying: Solid steel frame in 40 mm square-tube profile, torsion-stiff welded construction, main pillars with base plate for dowel-anchorage. Solid steel welded construction in square-tube profile, with fork-lift lugs, 4 hooks and tapered guide pins for easy touchdown on the portal. Sufficient stability for 1.500 kg weight. Supporting area with bars and stacking corners. Material container in powder-coated steel, with cone for free-flowing bulk materials. Filler plug diam. 300 mm. Filler opening 350 x 350 mm with sliding cover. 5/8 plugs for granules transport NW 25 Stack frame  ...

Unidade de polimento oscilante HOMAG

Rolo perfurado WEHRMANN para uma melhor colagem madeira maciça / contraplacado

Dispositivo de quebra de listras IMA

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit prices for glue pots with bayonet adapter: for one gluing unit: EUR 6,666.00 for two gluing units: EUR 9,999.00 Delivery time: approx. 4 weeks

Unidade de polimento - 1 motor

Pré-aquecedor PU IMA 2,5 kg

Raspador de perfil de raio IMA 08.263