máquinas de embalagem termoformadoras usadas para venda (56)

Ferramentas: 4 x 2; tamanho aprox. 212 mm x 115 mm Largura do filme: 563 mm

Largura do filme: 422 mm Funcionou apenas durante 867 horas.

Produção de porções de 14g + 20g – 32 porções por ciclo para restauração Raramente disponível com este formato. Perfeito para porções de geléia, ketchup, manteiga, caldo, cubos de gelo etc.

Termoformador MECA Tipo: 650 Número: T02126 Ano construção: 07/04 Distância entre correntes: 500 mm Corantes: (4x) 210 mm x 170 mm, dimensões totais: 7300 mm x 1300 mm x 2470 mm Incluindo grande quantidade de peças.

Tipo: MUTIVAC R 530 Tipo de filme: flexível Largura da película inferior: 625 mm Largura da película superior: 610 mm Comprimento de corte: 657 mm Tamanhos da embalagem: 2.1 (2 embalagens.: 640 x 267 mm) Max.depth: 200 mm Bomba de vácuo: 250 m3/h Comprimento: 8500 mm

Two identical thermoforming machines DIXIE-UNION DV 2000 are available. Supply voltage: 380V, frequency: 50Hz, rated current: 20A, version with red CEE three-phase plug (3~). Machine 1 was still in operation until 2025. Machine 2 has not been in use for a longer period and is not complete, as relays were removed for spare parts. An on-site inspection is possible, not under power.

Variovac Rotarius semi-automatic tray sealer with a dual-tool system owes its name to its practical rotary table: while the machine vacuum seals and gas flushes trays in one station, the operator can simultaneously remove finished trays and load new ones at the front. This prevents downtime and increases output when packaging a wide range of products from both the food and non-food sectors. Film roll diameter: up to 300 mm. Tray depth: up to 100 mm. Tray depth for skin: up to 40 mm. Product protrusion: up to 25 mm. Packaging output: 4 to 8 cycles/min. Packaging types: MAP, Skin, Sealing. Compressed air: min. 6 bar. Electrical voltage: 7 kW - 230/400 V - 13 A - 50 Hz - 3 Ph. Busch RA 0063F vacuum pump. Control panel with Siemens S7-300 PLC and Variovac Touch screen operation panel. Pallet with foil available., Type of Machine: Tray sealer, Capacity: 4 to 8 cycles/min, Motor: 7 kW - 230/40 ...

Used ILLIG VHW 72/2 Preheater with 2 x electrically heated rolls. Width 720 mm. 380V 50 Hz 3 ph. Heating Capacity 30 kW. Motor 0.18 kW. Total Amps 48 A. Max. Temp. 130.

Offered is a thermoform vacuum packaging machine / deep-drawing packaging machine from CFS. Air: 8bar / 500Nl/min, water: 2bar / 75l/min, weight approx. 2800kg. Inspection by arrangement possible.

Multivac R 240 de 2005, filme duro e mole, largura do filme 355 mm, largura de descolagem 200 mm, pré-aquecimento sanduíche, carimbos aquecidos, MAP, controlo MC 96-2, curso superior na estação de molde e vedação, corte de filme macio e duro, correia de saída e rebobinador de filme residual, lubrificação central, lubrificação automática por corrente. Em condições perfeitas para uso.

A fully automatic tray sealing machine VC 999 in inline design is available. Tray depth: 120mm, tool dimensions single: 350mm/460mm, tool dimensions double: 350mm/222mm, tool dimensions quadruple: 350mm/145mm, packaging capacity: 8-12cycles/min, machine dimensions X/Y/Z: approx. 4500mm/1000mm/1800mm, weight: approx. 900kg. An on-site inspection is possible.

A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Capacity: 25 strokes/min, total capacity: 36000 cups/min, filling volume: butter/margarine (hotel portions): 10g, whipped products: 5g, mold dimensions X/Y/Z: 40mm/50mm/20mm. Dimensions X/Y/Z: approx. 5000mm/1500mm/1800mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible.

ILLIG PLS75b Inline Counter/ Stacker, with Hole Punch Station, age 2006, Max. Stacking Area: 750 x 350 mm, Min Height of formed product: 25 mm, Max. height of Formed Product: 150 mm, Min. dia. of product : Ø 40 mm, Max. dia. of Product: Ø 150 mm, Max. length of Product Stack: 730 mm, Output rate of Product Stacks: 1200 Stacks/ hr, Rotating Head to neatly remove Products from the Thermoformer Mold with integrated suction, Inline Hole Punch Station, Inline Counter Stacker Station, Compressed Air: 0.2 L at 6 bar, approximately, Total Drive Rating: 19 kW, Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE), Cross delivery conveyor station for counted cups., All Motors are Indramat Servo Motors, Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls, Siemens S7 PLC Controls, Delivers Counted Cups/ Containers at Right Angles to machine direction, New original ILLIG Gea ...

A small table-top vacuum machine (vacuum chamber machine) Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16m³/h, max. utilization time per day: 5h. Documentation available. On-site inspection is possible.

Fully Automatic Thermoforming Machine: cup/container forming, filling and film sealing system. Applicable for vacuum, gas and MAP (modified atmosphere packaging) packaging of food, meat, sea food, fruit, vegetable, medical and hardware items. - Main parts made of stainless steel, easy to change modular moulds, water cooling system for thermoforming mould and sealing module. BUSCH (Germany) vacuum pump, OMRON PLC, touch screen and servo motor, SCHNEIDER relay and air switch. Upper packing materials: heat-sealable films, lower packing materials: thermo-formable, heat seal film, rigid and flexible film is possible. - Specifications: total power: 380V, 13kW | air: 1m?/6bar | vacuum: 0.8-1.0m?/6bar | water: 4 liter/min | max. upper film width: 390mm (practical width 350mm) | length per mould: 200mm | max. drawing depth: 80mm (thermoforming depth depends on thickness of lower film) | loding ar ...

Fully automatic thermoforming machine: cup/container forming, filling and film sealing system. Applicable for vacuum, gas and MAP (modified atmosphere packaging) packaging of food such as sandwiches, meat, sea food, fruit, vegetable, medical and hardware items. - Main parts made of stainless steel, easy to change modular moulding tool, water cooling system for thermoforming mould and sealing module. BUSCH (Germany) vacuum pump, SMC pneumatic components, DELAT PLC and touch screen. - Specifications: upper packing materials: heat-sealable films, max. film width: 400mm | lower packing materials: thermo-formable, heat seal film (rigid and flexible film is possible), thickness: 300 - 900?m, upper film width: max. 400mm + 2mm, max. drawing depth: 80mm (thermoforming depth depends on thickness of lower film) | loading area: 120cm ? 150cm (optional: additional length) | max. speed of the machi ...

Fully automatic thermoforming machine for forming and filling small plastic vials with liquids, creams or pasty products. Specifically designed for use in the pharmaceutical, food or chemical industries. Easily interchangeable modular trays allow the production of vials of different sizes and shapes. Suitable for the production of multiple packs, whose number can be set as needed. Dosing and filling of the filling material is performed by a peristaltic pump, which is characterized by easy operation, cleaning and adjustment. - Specifications: packaging materials: PVC/PE composite film, PET/PVDC as environmentally friendly composite material, PVC/EVOH ultra-high barrier composite film for e.g. pesticide packaging | packaging thickness: 0.25-0.35mm | max. roll outer diameter: 400mm with standard core (70-76mm) | max. drawing depth on one side: 12.5mm | max. molding surface: 120mmx210mm | vi ...

A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible.

Uma máquina termoformadora universal de duplo curso Illig está disponível. Dimensões da forma X/Y: 960mm/560mm, profundidade máxima de desenho: 280mm, dimensões máximas do painel X/Y: 960mm/560mm, potência do motor: 1.5kW, potência de aquecimento: 16.3kW, zonas de aquecimento: superior e inferior. É possível uma inspeção no local.

Seladora de bandeja/empacotadora de pele Modelo: Erme TSK 410 compressor + MAP-GasValve MAP-Traytool 2 x 225x175mmm incl. As máquinas podem ser equipadas com ferramentas para embalagens de pele

Tremonha e calha vibratória para UPS Uhlmann

Illig SK 74-C de uma oficina para deficientes Ano de construção 2006 Nº de Série.426-0172 JM80Q2 +2 paletes com aprox. 38 rolos de filme Dimensões em mm aprox. 2200x1600x1600

Fabricante: CFS (GEA) Tipo: Compact 420 Ano de nascimento: 2010 El. especificações: 28 kW, 42 A, 400 V, 50 Hz Máquina de rotulagem: Fabricante: CFS Tipo: TiroLabe TL-150 Ano de nascimento: 2010 Inclui 4 conjuntos de formatos Bomba de vácuo: BUSCH R5 Inclui transportador de saída ESPERA Estado: muito bom

Multivac R 240, largura da película 430 mm, exaustor 530 mm, 5 formatos, película macia, fumigação, bom estado. Ainda em produção até fevereiro de 2024

DIXIE UNION, DIXIEVAC2000 Thermoformer, 400 Volt, 50 HZ, em condições de trabalho

Multivac R 230, ano de fabricação 2001, largura do filme 355 mm, comprimento de tração 210 mm, seção de carga livre de 1,6 m, controle MC96II com monitor LCD, guarnição lateral de 10 mm, duas guilhotinas de corte cruzado, transportador de descarga ajustável em altura, lubrificação de corrente central, novo inversor servo para alimentação de corrente, ferramenta Vario com formatos intercambiáveis. Formato: 1.1 . 335 mm x 210 milímetros 2,1 - 167,5 mm x 210 milímetros 2,2 - 167,5 mm x 105 milímetros 3,1 - 111,66 mm x 210 mm Comprimento total da máquina 5,15 m Substituição de peças operacionais e de desgaste.

máquina termoformadora usada TIPO Powerpak NT 420 ano 2011 para venda Máquina foi retirada da produção - correu até a última. Largura da folha 420 VZ 590 milímetros Preço sob consulta

Carrinho de formato para armazenar peças de formato para máquinas de desenho profundo feito inteiramente de aço inoxidável com três gavetas, uma gaveta e uma superfície de armazenamento, móvel com rolos de travão Extratos resilientes com 30 kg e com plástico aprovado por alimentos, bem como a bandeja a construção biselada impede que o carro incline. O carrinho de formato é utilizado para o armazenamento adequado de formatos com todos os acessórios. Todas as peças estão localizadas num só local e podem ser conduzidas à máquina quando mudam de formato. Dimensões: 1250x900/600x1100 mm (WxDxH)

Máquina de embalagem de desenho profundo de alto desempenho da MULTIVAC - TAMBÉM ADEQUADO PARA FOLHA DURA - Largura da película 420mm - Com muitos extras - Formato duplo (portanto, 2x de velocidade)